Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor Gedpfx Amjtwqn Sezsbp - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Technical data max. working width 1100 mm max. workpiece thickness 150 mm min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power sanding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Gedpstppzvjfx Amzsbp Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Machine height approx. 1900 mm

Condition: reconditioned (used), machine/vehicle number: 10728, functionality: fully functional, Table size: 2300 x 900 mm. Gsdpfjiyp Rfex Amzobp

Condition: good (used), Code: 0437 Gbjdpfx Amezkhmkjzjp Brand: CMC - ITALY Model: CL 300 - CE Standard Belt sanding machine with double gooseneck and 3 motors for joinery, furniture, custom-made furniture, window and door frames, doors, panels, metals, aluminium and various other applications – CE Standard Worktable length 3000 mm Worktable width 800 mm Vertical table stroke 670 mm Transversal table stroke 800 mm Gooseneck depth 700 mm Gooseneck height 250 mm Pulleys diameter 250 mm N° 2-speed motor 3/4 Hp Table lifting/lowering motor 0,5 Hp Suction motor 0,5 Hp Belt width 120/150 mm Belt length 7850 mm Overall dimensions mm 4000 x 1550 x 1600 h Weight kg 490

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 2435059, total length: 1,500 mm, total width: 700 mm, total height: 1,450 mm, table height: 900 mm, type of input current: three-phase, table length: 1,000 mm, table width: 280 mm, height adjustment type: electric, input voltage: 380 V, grinding belt length: 2,580 mm, grinding height: 150 mm, Enorm (now Kündig) edge sanding machine in very good, used condition. LBK-D/solid – manufactured in 1995. The edge sanding machine was purchased from a dealer in 2022. The machine is being sold as part of the closure of our carpentry business. Price for pickup – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. Gsdjziupiopfx Amzobp An inspection of the machine is possible by arrangement. Fixed inspection dates are July 18th or August 1st from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 belt sanding machine with combination sanding head with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating of workpiece carrier plates Sanding off defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro and polyester coatings Sanding of barrier films with graphic operator terminal NC-controlled thickness setting from 3-150 mm Activation of the calibrating roller via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Gbedpfx Aszk N Ddomzep Sanding width 1100 mm Belt length 2150 mm Belt speed frequency-controlled, approx. 2-18 m/sec Drive sanding head 15 kW Feed rate 5/10 m/min Compressed air 6 bar Compressed air consumption 15 l/min with belt dust extraction 490 l/min Extraction nozzle 180 mm Air requirement sanding head 1800 m³/h Required air speed 20 m/sec Total power connection approx. 17 kW Weight approx. 2000 kg Dimensions WxDxH 1840x1670x2200 mm The machine will be equipped with a new feed belt. Availability: short term Location: Röllbach in accordance with its age.

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical data: - Length of the work tables: 1440 mm - Overall width of the two work tables: 710 mm - Inclination adjustment of the work tables: 0 to 30 degrees - Working pressure: 6 bar Gbodozk Ny Eepfx Amzep - Abrasive belt length: 2170 mm - Width of the abrasive belt: 150 mm - Speed of the abrasive belt: 10 to 20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical supply: 400 V / 2.9 kW Weight: 490 kg Availability: short notice Location: 63934 Röllbach Well-maintained

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Grinding from below - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure bar - Electromotive adjustment of tool thickness with a clearly readable digital display Godozk Nyrjpfx Amzobp - Push buttons with contactor control - Grinding width 1350 mm - Workpiece thickness max. 150 mm - Grinding belt width 1360 mm - Grinding belt length 1900 mm - Roller feed, switchable 10 + 20 m/min - Compressed air connection 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Dimensions W x D x H 1800 x 1100 x 1520 mm Weight 2600 kg Availability: short-term Location: 63934 Röllbach Well-maintained

Condition: used, Year of construction: 1998, Used machine Gbodpfx Amezk Nxzezsp Year of manufacture: 1998 1 belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine-sanding solid wood Calibrating workpiece carrier panels Sanding off faulty veneers and paints Intermediate sanding of PU, hydro, UV, nitro and polyester paints Sanding of barrier films with graphic operator terminal NC-controlled thickness adjustment from 3-150 mm Activating the calibrating roller via the terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width 1350 mm Belt length 2150 mm Belt speed, frequency-controlled, approx. 2-18 m/s Drive for sanding unit 15 kW Feed speed 5/10 m/min Compressed air 6 bar Compressed air requirement 15 NL/min with belt air extraction 490 l/min Extraction nozzle 180 mm Air requirement for sanding unit 1800 m³/h Required air velocity 20 m/s Total power connection approx. 17 kW Weight approx. 2500 kg Dimensions WxDxH 2090x1670x2020 mm Machine will be equipped with a new feed belt Availability: by agreement Location: Röllbach in accordance with age

Condition: used, Used machine Year of manufacture: 1981 Equipment and technical data: Motor 5.2/7.5 kW, pole-reversible 750/1500 rpm Belt speeds: 11 and 22 m/sec with attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Gedpjzk Nxnsfx Amzebp Belt dimensions: 7800 x 150 mm Includes pneumatic pressure shoe with belt tension brake Dust extraction nozzle: 180 mm Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach like new

Condition: used, Used machine Wide-belt sanding machine Motor power: 4 hp / 3 kW Motor speed: 2890 rpm Gbodpfx Ajzk Nvmsmzop Table dimensions: approx. 2460 mm x 900 mm Manual table height adjustment Transport dimensions: approx. 3600 x 1600 x 1450 mm Weight: approx. 500 kg Availability: short notice Location: Röllbach Condition: commensurate with age

Condition: used, Used machine Condition: commensurate with age Table size: 2600 x 900 mm Grinding length, max. usable: 2700 mm Belt length: 7800 mm x 150 mm 1100 mm curvature to the right Motor: 5.2/7.5 kW with belt air blast nozzle Shipping dimensions: 4300 x 1650 x 1800 mm Weight: 1300 kg Availability: short notice Gbsdpfx Aozk Ntxjmzop Location: Röllbach commensurate with age

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: completely inspected and serviced, including a new feed belt. Equipment and technical data: - including a combined unit with a contact roller and a sanding block - with a height-adjustable contact roller for calibration - with an air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - with a pneumatic belt tensioning device - with a rotating cleaning brush on the outlet side of the machine - belt oscillation via a light barrier for automatic monitoring and control of the lateral belt position for uniform belt wear - with a roller table at the infeed - with a digital display for the electrically driven workpiece thickness adjustment - with an additional veneer sanding beam - with 2 spare sanding blocks - sanding width: 1350 mm - sanding belt length: 1900 mm - passage height: 150 mm - main motor: 15 kW - feed speed, continuously adjustable: 2.5 - 12.5 m/min - dust extraction nozzle: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Storage location: 63934 Röllbach Condition commensurate with age. Gsdpfxozk Npme Amzjbp

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Casadei Libra 10/95 TC machine with V2 special equipment package Gbjdpfxezk Nn Ns Amzep - Working width: 950 mm - Also suitable for smaller craft businesses for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard equipment includes a diagonally grooved steel roller Ø 120 mm for calibrating - Fine adjustment of the working height - Clear control panel on the front - Robust, tubular-reinforced monoblock steel machine body, robotically welded, with work units mounted high up for maximum rigidity - Motorized height adjustment of the work table with digital display - Electronically controlled sanding belt oscillation - Carpet feed via geared motor with two speeds - Natural rubber feed carpet with negative profile - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers, in front of or behind each work unit - Pneumatic belt tension per unit with decimal correction option for grit size/belt thickness - Universally applicable for solid wood and veneer thanks to the combination unit - Entry-level model for smaller companies - Combination unit for calibrating and sanding: - Diagonally grooved steel roller Ø 120 mm with fine height adjustment - Hard sanding shoe with graphite support - Universal design for calibrating and sanding solid wood, chipboard and veneer - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system: FOX 500 KTR - Table extension with 2 rollers at the infeed and outfeed - Automatic table positioning with push button - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Working width max. 950 mm - Feed speed: 4.5/9 m/min - Workpiece height: 4 - 170 mm - Motor 7.5 kW - Dust extraction port 140 mm Dimensions: 1388 x 1545 x 1668 mm Weight: 600 kg Availability: short notice Location: Röllbach Well-maintained

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Grinding width: 1100 mm Gedpfxezk Nm Sj Amzjbp Grinding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speeds: continuously variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 grinding shoe unit: with air cushion grinding shoe Drives: 1. Grinding unit: 15 kW 2. Grinding unit: 15 kW 3. Grinding unit: 11 kW with table extension at the infeed with table extension at the outfeed Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air consumption: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim in accordance with age

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Gsdpfx Ajzk Nlbjmzebp Equipment and technical data: constant working height with combination unit with steel contact roller and electronic CPS segmented pressure beam with 25 mm spacing Sanding width 1100 mm Sanding belt length 1900 mm Workpiece thickness min./max. 3 - 150 mm Feed rate: continuously variable 2.5 - 13 m/min Sanding unit 11 kW Optional equipment package: - continuously variable belt drive speed via frequency converter - belt blowing device - vacuum table with blower Control: - terminal with 50 program memory slots - simple menu control via plain text display - visual display of active elements during operation - fully automatic PLC-controlled start sequence for all drives - digital working time recording with cleaning brush roller table at the infeed roller table at the outfeed Extraction capacity 1850 m³/h Extraction nozzle 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection 6-8 bar Air consumption 10 l/min Weight 2200 kg Availability: by arrangement Location: Röllbach well-maintained

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Gbodpjxy Tmuefx Amzop

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Table size: 750 x 300 mm Abrasive belt dimensions: 2600 x 150 mm Belt back panel: 850 x 200 mm Belt speed: 20 m/sec. Table stroke up to 200 mm Motor: 3.0 kW Oscillation motor: 0.25 kW Extraction connection: 100 mm Oscillation drive with geared motor Height-adjustable cast iron table with double column guide Gbsdoyulfaspfx Amzop Sanding unit infinitely tiltable up to 45° Dimensions (LxWxH): approx. 1720 x 760 x 1160 mm Net weight: approx. 180 kg Availability: short notice Warehouse location: Flörsheim

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment and technical specifications: - Usable WORKING WIDTH mm: 950 - SANDING BELT LENGTH mm: 670/970 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATING ROLLER mm: 150 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER HP: 10 - BELT SPEED m/s: 18 - FEED MOTOR POWER HP: 0.75 - Variable speed feed conveyor with infinitely adjustable speed, m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tensioning - 2 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER TABLES each with 2 rollers at infeed and outfeed - 1 EXTRACTION CONNECTION with 160 mm diameter - AUTOMATIC TABLE POSITIONING BASIC MACHINE ACCORDING TO CE STANDARD PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system The machine model with this system has been running non-stop since 2008 without lateral belt drift! Gedpfxoy I Eqws Amzobp Including special equipment: 11 kW motor Pneumatic sanding pad incl. feed-synchronized control Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Equipment and technical data: with 2 combination units with 2 contact rollers, 1 x 65° Shore, 1 x 85° Shore and 2 air sanding shoes Sanding width 1350 mm Sanding belt dimensions 1360 x 1900 mm Workpiece thickness max. 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at the infeed Roller table at the outfeed Infinitely variable feed rate from 2.5 to 12.5 m/min Gbjdpjy Dkhgefx Amzjp Weight approx. 3700 kg Availability: short-term Location: Flörsheim

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec Gbodpfjw Tfxdox Amzsp L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Gbjdpfsw Naanex Amzep MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: used, Used machine Condition: age-appropriate table size 2600 x 900 mm max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right motor 5,2 kW Gbsdpow I U Hyefx Amzop Shipping dimensions: 4300x1650x1800 mm weight: 620 kg Availability: short term Location: Flörsheim

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Gbjdpfx Amsx H U Nmjzop Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Including pneumatic pressure shoe with belt brake Extraction nozzle: 180 mm Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Gbedox Rv Dyspfx Amzjp Single-side edge sanding machine Manual conversion from solid wood to veneer sanding Patented device with foldable stops With sanding belt oscillation Manual tilting of the sanding unit 0-45° by scale Motor: 2.2 kW Oscillation stroke: 5 mm Work table: 400 x 1100 mm Sanding belt width: 150 mm Extraction connection: 100 mm Footprint: 600 x 1080 mm Weight: approx. 400 kg Availability: short-term Location: Flörsheim