Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 950 kg, Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air-blast, frame support, chassis. Fedpfx Aoxq Ehxsmbogd

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit Fedpfx Amjtwqn Sjbjgd - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: reconditioned (used), machine/vehicle number: 10728, functionality: fully functional, Table size: 2300 x 900 mm. Fgedpfsiyp Rfex Ambed

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Fgjdpfxstppzve Ambed Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Technical data max. working width 1100 mm max. workpiece thickness 150 mm min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power sanding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Machine height approx. 1900 mm

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 2-Belt Wide Belt Sander - Usable working width: 1100 mm - Abrasive belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller, Art. 018: 150 mm - Sanding shoe width: 50 mm - Motor power: 14.7 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with infinitely variable speed: 4–20 m/min - Motorized height adjustment: 0.24 kW - Mechanical belt oscillation "ECO GEAR PATENT SYSTEM" - 1 pc. drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pcs. rubber-coated pressure rollers - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 extraction ports, Ø 160 mm - Automatic table positioning Additional options: - Electronically segmented sanding pad with 20 segments - Increased belt motor power to 14.7 kW instead of 11 kW - Frequency-controlled feed speed - Electronic machine function control with 7" touchscreen Fgjdpfxjxz Iale Ambod BASE MACHINE ACCORDING TO CE STANDARD Art. 029 IMPORTANT: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Availability: Short notice Location: Holm

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 Fsdpfx Ajywlfyombogd - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Working height: 780–920 mm Feed rate: 4.5–22 m/min Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Brush roller: Ø 150 mm Fodpfxozinvij Ambegd Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Machine weight: approx. 3,850 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 2435059, total length: 1,500 mm, total width: 700 mm, total height: 1,450 mm, table height: 900 mm, type of input current: three-phase, table length: 1,000 mm, table width: 280 mm, height adjustment type: electric, input voltage: 380 V, grinding belt length: 2,580 mm, grinding height: 150 mm, Enorm (now Kündig) edge sanding machine in very good, used condition. LBK-D/solid – manufactured in 1995. The edge sanding machine was purchased from a dealer in 2022. The machine is being sold as part of the closure of our carpentry business. Price for pickup – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates are July 18th or August 1st from 10 a.m. to 2 p.m. at our facility in Stemwede. Fgodjziupispfx Ambod

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 belt sanding machine with combination sanding head with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating of workpiece carrier plates Sanding off defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro and polyester coatings Sanding of barrier films with graphic operator terminal NC-controlled thickness setting from 3-150 mm Activation of the calibrating roller via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width 1100 mm Belt length 2150 mm Belt speed frequency-controlled, approx. 2-18 m/sec Fodpfjzk N Ddox Ambjgd Drive sanding head 15 kW Feed rate 5/10 m/min Compressed air 6 bar Compressed air consumption 15 l/min with belt dust extraction 490 l/min Extraction nozzle 180 mm Air requirement sanding head 1800 m³/h Required air speed 20 m/sec Total power connection approx. 17 kW Weight approx. 2000 kg Dimensions WxDxH 1840x1670x2200 mm The machine will be equipped with a new feed belt. Availability: short term Location: Röllbach in accordance with its age.

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical data: - Length of the work tables: 1440 mm - Overall width of the two work tables: 710 mm - Inclination adjustment of the work tables: 0 to 30 degrees - Working pressure: 6 bar - Abrasive belt length: 2170 mm - Width of the abrasive belt: 150 mm - Speed of the abrasive belt: 10 to 20 m/sec - Vertical adjustment of the oscillating unit: 125 mm Fgsdszk Ny Ejpfx Ambed - Air consumption: 25 NL/min - Electrical supply: 400 V / 2.9 kW Weight: 490 kg Availability: short notice Location: 63934 Röllbach Well-maintained

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Grinding from below - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure bar - Electromotive adjustment of tool thickness with a clearly readable digital display - Push buttons with contactor control - Grinding width 1350 mm - Workpiece thickness max. 150 mm - Grinding belt width 1360 mm - Grinding belt length 1900 mm Fgsdpfxozk Nyrs Ambed - Roller feed, switchable 10 + 20 m/min - Compressed air connection 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Dimensions W x D x H 1800 x 1100 x 1520 mm Weight 2600 kg Availability: short-term Location: 63934 Röllbach Well-maintained

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine-sanding solid wood Calibrating workpiece carrier panels Sanding off faulty veneers and paints Intermediate sanding of PU, hydro, UV, nitro and polyester paints Sanding of barrier films with graphic operator terminal NC-controlled thickness adjustment from 3-150 mm Activating the calibrating roller via the terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width 1350 mm Belt length 2150 mm Belt speed, frequency-controlled, approx. 2-18 m/s Drive for sanding unit 15 kW Feed speed 5/10 m/min Compressed air 6 bar Compressed air requirement 15 NL/min with belt air extraction 490 l/min Extraction nozzle 180 mm Fgsdpjzk Nxzefx Ambod Air requirement for sanding unit 1800 m³/h Required air velocity 20 m/s Total power connection approx. 17 kW Weight approx. 2500 kg Dimensions WxDxH 2090x1670x2020 mm Machine will be equipped with a new feed belt Availability: by agreement Location: Röllbach in accordance with age

Condition: used, Used machine Year of manufacture: 1981 Equipment and technical data: Motor 5.2/7.5 kW, pole-reversible 750/1500 rpm Belt speeds: 11 and 22 m/sec with attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Fgsdpfxszk Nxns Ambjd Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Includes pneumatic pressure shoe with belt tension brake Dust extraction nozzle: 180 mm Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach like new

Condition: used, Used machine Wide-belt sanding machine Motor power: 4 hp / 3 kW Motor speed: 2890 rpm Table dimensions: approx. 2460 mm x 900 mm Manual table height adjustment Transport dimensions: approx. 3600 x 1600 x 1450 mm Weight: approx. 500 kg Availability: short notice Fsdpfxozk Nvmj Ambjgd Location: Röllbach Condition: commensurate with age

Condition: used, Used machine Condition: commensurate with age Table size: 2600 x 900 mm Grinding length, max. usable: 2700 mm Belt length: 7800 mm x 150 mm Fgjdpfx Amjzk Ntxsbed 1100 mm curvature to the right Motor: 5.2/7.5 kW with belt air blast nozzle Shipping dimensions: 4300 x 1650 x 1800 mm Weight: 1300 kg Availability: short notice Location: Röllbach commensurate with age

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: completely inspected and serviced, including a new feed belt. Equipment and technical data: - including a combined unit with a contact roller and a sanding block - with a height-adjustable contact roller for calibration - with an air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - with a pneumatic belt tensioning device - with a rotating cleaning brush on the outlet side of the machine - belt oscillation via a light barrier for automatic monitoring and control of the lateral belt position for uniform belt wear - with a roller table at the infeed - with a digital display for the electrically driven workpiece thickness adjustment - with an additional veneer sanding beam - with 2 spare sanding blocks - sanding width: 1350 mm - sanding belt length: 1900 mm - passage height: 150 mm - main motor: 15 kW Fedpfxezk Npmj Ambjgd - feed speed, continuously adjustable: 2.5 - 12.5 m/min - dust extraction nozzle: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Storage location: 63934 Röllbach Condition commensurate with age.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Casadei Libra 10/95 TC machine with V2 special equipment package - Working width: 950 mm - Also suitable for smaller craft businesses for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard equipment includes a diagonally grooved steel roller Ø 120 mm for calibrating - Fine adjustment of the working height - Clear control panel on the front - Robust, tubular-reinforced monoblock steel machine body, robotically welded, with work units mounted high up for maximum rigidity - Motorized height adjustment of the work table with digital display - Electronically controlled sanding belt oscillation - Carpet feed via geared motor with two speeds - Natural rubber feed carpet with negative profile - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers, in front of or behind each work unit - Pneumatic belt tension per unit with decimal correction option for grit size/belt thickness - Universally applicable for solid wood and veneer thanks to the combination unit Fgodpfxszk Nn Nj Ambed - Entry-level model for smaller companies - Combination unit for calibrating and sanding: - Diagonally grooved steel roller Ø 120 mm with fine height adjustment - Hard sanding shoe with graphite support - Universal design for calibrating and sanding solid wood, chipboard and veneer - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system: FOX 500 KTR - Table extension with 2 rollers at the infeed and outfeed - Automatic table positioning with push button - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Working width max. 950 mm - Feed speed: 4.5/9 m/min - Workpiece height: 4 - 170 mm - Motor 7.5 kW - Dust extraction port 140 mm Dimensions: 1388 x 1545 x 1668 mm Weight: 600 kg Availability: short notice Location: Röllbach Well-maintained

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Grinding width: 1100 mm Grinding belt length: 1900 mm Fjdpfx Amozk Nm Sebogd Workpiece thickness: 3-150 mm Feed speeds: continuously variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 grinding shoe unit: with air cushion grinding shoe Drives: 1. Grinding unit: 15 kW 2. Grinding unit: 15 kW 3. Grinding unit: 11 kW with table extension at the infeed with table extension at the outfeed Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air consumption: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim in accordance with age

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: constant working height with combination unit with steel contact roller and electronic CPS segmented pressure beam with 25 mm spacing Sanding width 1100 mm Sanding belt length 1900 mm Workpiece thickness min./max. 3 - 150 mm Feed rate: continuously variable 2.5 - 13 m/min Sanding unit 11 kW Optional equipment package: - continuously variable belt drive speed via frequency converter - belt blowing device - vacuum table with blower Control: - terminal with 50 program memory slots - simple menu control via plain text display - visual display of active elements during operation - fully automatic PLC-controlled start sequence for all drives - digital working time recording with cleaning brush roller table at the infeed roller table at the outfeed Extraction capacity 1850 m³/h Extraction nozzle 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection 6-8 bar Air consumption 10 l/min Weight 2200 kg Fgsdpfx Amszk Nlbobjd Availability: by arrangement Location: Röllbach well-maintained

Condition: good (used), Code: 0437 Brand: CMC - ITALY Model: CL 300 - CE Standard Belt sanding machine with double gooseneck and 3 motors for joinery, furniture, custom-made furniture, window and door frames, doors, panels, metals, aluminium and various other applications – CE Standard Worktable length 3000 mm Fgsdpszkhmkefx Ambed Worktable width 800 mm Vertical table stroke 670 mm Transversal table stroke 800 mm Gooseneck depth 700 mm Gooseneck height 250 mm Pulleys diameter 250 mm N° 2-speed motor 3/4 Hp Table lifting/lowering motor 0,5 Hp Suction motor 0,5 Hp Belt width 120/150 mm Belt length 7850 mm Overall dimensions mm 4000 x 1550 x 1600 h Weight kg 490

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Fgsdpfxexy Tmus Ambsd

Condition: excellent (used), Working range Ø 5 – 60 mm Belt speed 26 m/sec Feed speed 0–36 m/min The feed of the workpiece is regulated by adjusting the angle of the feed wheel Feed motor 0.05 kW Drive motor: 2.2 kW/2,900 rpm Sanding belt dimensions: 1,840 × 150 mm Fsdpfozh Urbsx Ambsgd Cylindrical, conical, slightly bulging, short and long rods made of wood, metal or plastic can all be machined equally well.

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Table size: 750 x 300 mm Abrasive belt dimensions: 2600 x 150 mm Belt back panel: 850 x 200 mm Belt speed: 20 m/sec. Table stroke up to 200 mm Motor: 3.0 kW Oscillation motor: 0.25 kW Extraction connection: 100 mm Fgedpfoyulfaox Ambed Oscillation drive with geared motor Height-adjustable cast iron table with double column guide Sanding unit infinitely tiltable up to 45° Dimensions (LxWxH): approx. 1720 x 760 x 1160 mm Net weight: approx. 180 kg Availability: short notice Warehouse location: Flörsheim

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment and technical specifications: - Usable WORKING WIDTH mm: 950 - SANDING BELT LENGTH mm: 670/970 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATING ROLLER mm: 150 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER HP: 10 - BELT SPEED m/s: 18 - FEED MOTOR POWER HP: 0.75 - Variable speed feed conveyor with infinitely adjustable speed, m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tensioning - 2 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER TABLES each with 2 rollers at infeed and outfeed - 1 EXTRACTION CONNECTION with 160 mm diameter - AUTOMATIC TABLE POSITIONING BASIC MACHINE ACCORDING TO CE STANDARD Fjdpfx Asy I Eqwjmbegd PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system The machine model with this system has been running non-stop since 2008 without lateral belt drift! Including special equipment: 11 kW motor Pneumatic sanding pad incl. feed-synchronized control Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 1983, Used machine Fgjdpfx Aey Dkhgjmbed Year of manufacture: 1983 Equipment and technical data: with 2 combination units with 2 contact rollers, 1 x 65° Shore, 1 x 85° Shore and 2 air sanding shoes Sanding width 1350 mm Sanding belt dimensions 1360 x 1900 mm Workpiece thickness max. 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at the infeed Roller table at the outfeed Infinitely variable feed rate from 2.5 to 12.5 m/min Weight approx. 3700 kg Availability: short-term Location: Flörsheim