Condition: used, Year of construction: 2009, Dust removal brush with spiral brush, suitable for installation on an existing transport system. - Manufacturer: Venjakob - Height adjustable via a hand wheel - Working width: 1,300 mm - Total width: 2,450 mm of the brush unit - In stock in Blomberg - Voltage/Hz: 400/50 - Extraction system required on site - Extraction nozzles, 2 pcs - Diameter: 120 mm each - Volume flow: approx. 2,000 m²/h - Machine without control cabinet and frequency converter (Optionally available) - Without roller conveyor, only the brush machine Fgsdpjuulpqofx Acwoa

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Fsdpeun N Auefx Acwsga Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm Fgjdpex Ex Tmofx Acwea - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer Fladder - Type Gyro 300 VAC Ex - Working width 1300 mm - Year of manufacture 1999 - Number of brush heads 6 pcs. - Rotating and oscillating grinding unit - 2 vacuum fans - Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet - Feed continuously adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg Fsdpfxjvvl H Ne Acwjga - Separate control cabinet, Dimensions: W: 800 mm, depth: 400 mm, height: 1700 mm - Location, in the warehouse - Volt, HZ 400 / 50

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side Fodpfoxtakmox Acwoga - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: ready for operation (used), Year of construction: 1994, machine/vehicle number: 20541, functionality: fully functional, power: 5.7 kW (7.75 HP), input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, We are offering this ready-to-use Johannsen T 96 wide belt sander, year of manufacture 1994. Fedpfxjyx Hf De Acwega Manufacturer: Johannsen Model: T 96 Year of manufacture: 1994 Condition: ready for operation Category ID: 828 Type ID: 1495 Machine type: wide belt sander If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1989, HESS JUNIOR grinder year 1989, max. grinding width approx. 180 mm, height approx. 160 mm Fedeyw R I Hopfx Acwsga price 3,000 €

Condition: excellent (used), operating hours: 4 h, functionality: fully functional, total width: 2,000 mm, total height: 2,200 mm, total length: 1,900 mm, working width: 1,300 mm, grinding width: 1,300 mm, overall weight: 3,200 kg, height adjustment type: electric, table width: 1,300 mm, power of feed motor: 35 W, input voltage: 400 V, transport length: 2,100 mm, transport height: 2,200 mm, transport width: 2,000 mm, A high-performance wide belt sanding machine designed for processing wood-based panels, solid wood, plastics and metal. Suitable for both rough sanding and final finishing, ensuring excellent surface quality and stable, repeatable results. The machine is equipped with two independently controlled sanding belt units, allowing the use of two different grit sizes at the same time. Each belt has individual speed control, which prevents surface scratches, overheating and clogging of the abrasive paper. The conveyor belt table, combined with precise height adjustment, enables sanding of materials up to 100 mm thick. Thickness adjustment is controlled via a digital control panel, ensuring accuracy and ease of operation. Each sanding drum features independent speed control via frequency inverters and belt position sensors. These systems prevent belt misalignment and automatically stop the machine if improper belt tracking is detected, protecting both the machine and the workpiece. The sander includes a central dust extraction system, ready to be connected to industrial dust collectors or vacuum systems via Ø100 mm outlets. In addition, each sanding belt is equipped with a pneumatic belt cleaning system, continuously removing dust during operation. Abrasive belt replacement is quick and easy – a single clamp release allows the belt to be removed from the machine. The sander is compatible with standard abrasive papers available on the market, joined with adhesive tape. No special or proprietary abrasives are required. KEY FEATURES • working width: 1300 mm • two independently controlled sanding belt units • possibility to use two different grit sizes simultaneously • variable speed control for each belt (frequency inverters) • sanding capacity up to 100 mm material thickness • conveyor belt table with height adjustment • digital control panel • pneumatic belt tensioning system • pneumatic belt cleaning system Fjdpfsmrqlnjx Acwoga • dust extraction outlets Ø100 mm • fast and easy belt replacement • semi-automatic operation The machine is in perfect condition. It was used for short-term demonstration purposes.

Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Sanding width 1100 mm First unit with hard rubber calibrating roller Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Fodpfx Acjyy Nnkswoga Adjustable feed speed Electric table adjustment Table position display Thickness gauge Good condition, tested and ready for demonstration

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Fgjdpfxoyttyve Acwoa Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: used, Year of construction: 1997, functionality: limited functionality, - Oscillation defective Fsdpfoyi Ug Asx Acwjga - Main switch replaced - Machine is operational - Sold without warranty

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 38947, Machine available at the end of March/beginning of April 2026 incl. extraction nozzle Workpiece thickness: 3 - 150 mm Feed speed: 4/8 m/min Abrasive belt oscillation contactless (photo-electric) - 1st unit (calibrating) Drive motor: 11 kW Steel sanding roller D=140 mm Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Abrasive belt grit compensation Extraction nozzle D=180 mm - 2nd unit (calibrating/fine sanding) Fjdjyrtriopfx Acwega Drive motor: 11 kW Sanding roller hardness approx. 90° Shore Abrasive belt grit compensation 2 pcs stationary and flexible contact air shoes Workpiece infeed control Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Extraction nozzle D=180 mm - 3rd workpiece cleaning brush Extraction nozzle D=140 mm Feed table pneumatically adjustable (spring-loaded/fixed) Front and rear table extension

Condition: used, OTT MEGAtronic 111 Wide-belt calibration and fine sanding machine 1st sanding unit: calibration roller unit 2nd sanding unit: electronically controlled segmented pad unit Working width: 1100 mm Feed speed: 5 + 10 m/min Sanding unit motor power: approx. 11 kW Machine is WORKSHOP TESTED Available ex stock Lieboch Fgedpeyw Rknjfx Acwoa

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Top: - 2 pressure rollers, rubber, feed - sanding unit Fsdpfx Ajx S I Nqscwoga - idler roller - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – unpainted – used sander, in very good condition Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Fgjdpfsyvvr Usx Acwsa Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Fjdpfxeyvvr Io Acwsga Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Fodpfx Acjw E Ty Uowjga Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Platen width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with steplessly variable speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 roller conveyors (each with 2 rollers) at infeed and outfeed - 1 extraction port, 160 mm Ø - Automatic table positioning - New patented belt oscillation system - No valves - No photoelectric sensors - Not sensitive to dust - Energy-efficient, eco-friendly system - Since 2008 this machine model with the mentioned system has been running continuously without lateral belt runoff!!! - Includes Unitek belt motor 14.7 kW instead of 11 kW (upgrade) - Includes Unitek pneumatic platen with control synchronized to feed speed Availability: short notice Stock location: Saxony-Anhalt

Condition: excellent (used), WIDE BELT SANDER Butfering 110cm Model – super 111L Sanding width: 1,100 mm 1 combination unit with steel roller The pad has quick raise/lower capability 11kW motor, star/delta starter Fgjdpeyymlyjfx Acwja Two feed speeds Electric table adjustment Electronic table position display Oscillation with photocells Sander in very good condition, ready for operation Machine dimensions: width 180cm, length 185cm, height 200cm Weight approx. 1,500kg

Condition: used, Year of construction: 1991, EDGE SANDING MACHINE LZK 4: Langzauner edge sanding machine LZK Machining and sanding of all types of wood, also in combination with plastics Year of manufacture: 1991 Motor power: 3 kW Belt speed: 22 m/sec Belt dimensions: 3000 x 200 mm Table size: 1250 x 350 mm Height adjustment range: 200 mm Extraction port diameter: 110 mm Minimum air speed: 20 m/sec Extraction capacity: 700 m3/h Total weight: 450 kg Total connected load: 3.2 kW Operating voltage: 3 x 380 V 50Hz Fedpfx Ajw A Aa Eecwega Required space: 1900 x 900 mm All technical data and information as per brochure

Condition: good (used), Year of construction: 1988, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 32055, Wide belt sander - Veneer sanding - Solid wood - Intermediate lacquer sanding Fedpfxoyv H Ake Acwsga With 2 sanding belts: - 1st belt: cross sanding - 2nd belt: longitudinal sanding with segmented pressure beam The machine is very well maintained and in good, ready-to-operate condition.

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting Fgodpfxew R Hh Uj Acwoa - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: used, OTT Comet-2 1100 Wide belt sander Sanding width 1100 mm Machine is untested Service is recommended No warranty / No guarantee Ex stock Lieboch NET price € 1,900.00 Fodpfjywiyzex Acwsga

Condition: used, Year of construction: 1987, Wide belt sanding machine Manufacturer: Samco Model: EG Year of manufacture: 1987 Fjdpsxdnrgefx Acwoga Sanding length: 3,000 mm Including spare sanding belts ä18326

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: completely checked + serviced, incl. new feed belt Features and technical specifications: - Incl. combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating cleaning brush at the machine's outfeed side - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of the lateral belt position for even belt wear - With roller table at infeed - With digital display unit for the electric motor-driven workpiece thickness adjustment - With additional veneer sanding beam - With 2x spare sanding shoes - Sanding width: 1350 mm Fjdpfjwka T Sjx Acwsga - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - Extraction connection 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Pictures show the machine in unrefurbished condition! Availability: approx. end of January 2026 Location: Röllbach

Condition: used, Used machine Year of manufacture: 1987 Features and technical data: - Pneumatic sanding unit - Quick-change sanding shoe - Table size: 2800 x 1250 mm - Max. usable sanding length between machine columns: 2600 mm - Sanding width with table cross movement: 1000 mm - Clearance under belt, electric table height adjustment: 340 mm Fedpfxoyq T H Do Acwega - Motor: 5.5 kW - Reversing switch for left and right belt run - Belt speed: 22 m/sec - Belt dimensions: 7800 x 150 mm - Extraction on left machine body: 1.1 kW, air output 1800 m³/h - Extraction nozzle: 180 mm Required space: 3950 x 2300 mm Weight: 900 kg Availability: short-term Location: 63934 Röllbach