Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding defective veneers and lacquers Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding barrier films with graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibrating roller can be activated via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1100 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blasting: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Bledpfjyulfmjx Acvjf Dimensions (W x D x H): 1840 x 1670 x 2200 mm Availability: short-term Location: Röllbach

Condition: excellent (used), MAWEG SATURN DUO grinding machine - after the technical review - very good condition - belt length 1800 mm TECHNICAL SPECIFICATIONS: grinding width 200 mm grinding height 145 mm 2 x sanding aggregate with shoe 1 upper brush 1 lower brush shoe electric height adjustment feed speed from 4 - 16 m / min feed speed adjustable on the gear motor pneumatic oscillation blowing on the tape 2 x 4 kW main engines 0.55 kW feed motor connection diameter 4 x 80 mm dimensions (length / width / height) 190 x 110 x 210 cm weight ~ 1300 kg Bledpfof N Nfljx Acvof

Condition: used, Working width ca. 1.300 mm mm Number of sanding units 2 st. Workpiece thickness max. ca. 150 mm Bljdpfx Aeypwarecvef engine 18,5 & 15 kW Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts.

Condition: ready for operation (used), Year of construction: 1994, machine/vehicle number: 20541, functionality: fully functional, power: 5.7 kW (7.75 HP), input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, We are offering this ready-to-use Johannsen T 96 wide belt sander, year of manufacture 1994. Manufacturer: Johannsen Model: T 96 Bljdpfsyx Hf Dox Acvef Year of manufacture: 1994 Condition: ready for operation Category ID: 828 Type ID: 1495 Machine type: wide belt sander If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Bedsyy Nnkepfx Acvjlf Sanding width 1100 mm First unit with hard rubber calibrating roller Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Adjustable feed speed Electric table adjustment Table position display Thickness gauge Good condition, tested and ready for demonstration

Condition: good (used), Year of construction: 1989, HESS JUNIOR grinder Bodpfx Ajyw R I Hscvjlf year 1989, max. grinding width approx. 180 mm, height approx. 160 mm price 3,000 €

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm Bsdpsxrb Rfjfx Acvjlf - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data:- Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment Bjdoyh Hwujpfx Acvolf width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: used, Year of construction: 2009, Dust removal brush with spiral brush, suitable for installation on an existing transport system. - Manufacturer: Venjakob - Height adjustable via a hand wheel - Working width: 1,300 mm - Total width: 2,450 mm of the brush unit - In stock in Blomberg - Voltage/Hz: 400/50 - Extraction system required on site - Extraction nozzles, 2 pcs - Diameter: 120 mm each - Volume flow: approx. 2,000 m²/h - Machine without control cabinet and frequency converter Blodpfx Acouulpqevjf (Optionally available) - Without roller conveyor, only the brush machine

Year of construction: 2002, condition: used, machine/vehicle number: 200212102, Technical data: - Manufacturer: Heesemann - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm Bjdoyffrnjpfx Acvslf - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized -Without own control (A new control can be offered as an option) - Location: Blomberg camp

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Bledpfx Acjun N Ausvof Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa Bedpfx Acjx Ex Tmsvolf - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer Fladder - Type Gyro 300 VAC Ex - Working width 1300 mm Blsdpfjvvl H Nox Acvof - Year of manufacture 1999 - Number of brush heads 6 pcs. - Rotating and oscillating grinding unit - 2 vacuum fans - Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet - Feed continuously adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate control cabinet, Dimensions: W: 800 mm, depth: 400 mm, height: 1700 mm - Location, in the warehouse - Volt, HZ 400 / 50

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled Blodextakmepfx Acvsf - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: used, Year of construction: 1997, functionality: limited functionality, - Oscillation defective - Main switch replaced - Machine is operational - Sold without warranty Bsdpfx Aeyi Ug Ascvjlf

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Bodeyttyvepfx Acvolf Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: excellent (used), WIDE BELT SANDER Butfering 110cm Model – super 111L Sanding width: 1,100 mm 1 combination unit with steel roller Blsdoyymlyopfx Acvef The pad has quick raise/lower capability 11kW motor, star/delta starter Two feed speeds Electric table adjustment Electronic table position display Oscillation with photocells Sander in very good condition, ready for operation Machine dimensions: width 180cm, length 185cm, height 200cm Weight approx. 1,500kg

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Bodsyvvr Uepfx Acvslf Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested Bljdpfx Acoyvvr Ijvjf GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, OTT MEGAtronic 111 Bsdpeyw Rknjfx Acvolf Wide-belt calibration and fine sanding machine 1st sanding unit: calibration roller unit 2nd sanding unit: electronically controlled segmented pad unit Working width: 1100 mm Feed speed: 5 + 10 m/min Sanding unit motor power: approx. 11 kW Machine is WORKSHOP TESTED Available ex stock Lieboch

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 38947, Machine available at the end of March/beginning of April 2026 incl. extraction nozzle Workpiece thickness: 3 - 150 mm Feed speed: 4/8 m/min Abrasive belt oscillation contactless (photo-electric) - 1st unit (calibrating) Drive motor: 11 kW Steel sanding roller D=140 mm Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Abrasive belt grit compensation Extraction nozzle D=180 mm - 2nd unit (calibrating/fine sanding) Drive motor: 11 kW Sanding roller hardness approx. 90° Shore Abrasive belt grit compensation 2 pcs stationary and flexible contact air shoes Workpiece infeed control Abrasive belt speed: 16 m/sec Bjdpoyrtriefx Acvjlf Abrasive belt dimensions: 1130 x 1900 mm Extraction nozzle D=180 mm - 3rd workpiece cleaning brush Extraction nozzle D=140 mm Feed table pneumatically adjustable (spring-loaded/fixed) Front and rear table extension

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Blsdpfex S I Nqsx Acvef Top: - 2 pressure rollers, rubber, feed - sanding unit - idler roller - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – unpainted – used sander, in very good condition Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 1988, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 32055, Wide belt sander - Veneer sanding - Solid wood - Intermediate lacquer sanding With 2 sanding belts: - 1st belt: cross sanding Bsdsyv H Akjpfx Acvjlf - 2nd belt: longitudinal sanding with segmented pressure beam The machine is very well maintained and in good, ready-to-operate condition.

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Platen width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with steplessly variable speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 roller conveyors (each with 2 rollers) at infeed and outfeed - 1 extraction port, 160 mm Ø Bledpfxow E Ty Ue Acvof - Automatic table positioning - New patented belt oscillation system - No valves - No photoelectric sensors - Not sensitive to dust - Energy-efficient, eco-friendly system - Since 2008 this machine model with the mentioned system has been running continuously without lateral belt runoff!!! - Includes Unitek belt motor 14.7 kW instead of 11 kW (upgrade) - Includes Unitek pneumatic platen with control synchronized to feed speed Availability: short notice Stock location: Saxony-Anhalt

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: Bodsx Rdf Sjpfx Acvjlf - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)