Used Hacker for sale (69)

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 400 x 400 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter surface 5m², dimensions 2500 x 700 x 1500 mm, weight 1000 kg, engine hydraulics, drip tray, filtrate, with or without filter cloths, piston pump incl. Piping with built Hodpfx Asfbbpqeacenu

Condition: refurbished (used), We offer various piston pumps from Häcker, PP design, various sizes from 1 - 10 m3/h, up to 10 bar, cpl. overhauled Hnodpsikl Tpefx Aacsu

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Hodsrunu Ijpfx Aacjnu

Condition: refurbished (used), Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: K62197, power: 18.5 kW (25.15 HP), overall weight: 1,700 kg, Schuko - ZM100 K shredder, overhauled, for sale due to circumstances. Includes discharge auger, rotor and knives are new. The rotor was defective and was replaced by Schuko. We couldn’t wait for the repair and purchased a new machine. The unit runs perfectly. 18 kW. Screen size 12/15 mm. Hopper size 1000*1000 mm. Shredder dimensions: 1050*1500*1710 mm. Sale without warranty. Shipping available. Hedpfjxlcdmox Aacsnu

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Knife for Weima, Large ..... For almost all common chippers / shredders Hnjdebxu Dhopfx Aacju From stock Bitburg Subject to prior sale

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ V-rotor Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: Automatic star-delta starter Automatic shut-off in idle mode Hjdpfxsxavtde Aaconu Vibration-damping machine feet CE compliant Availability: short-term Location: Flörsheim

Condition: good (used), Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm Hodpfx Asdl E Iisacjnu -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse Hsdpfjihpg Ejx Aaconu - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

Condition: refurbished (used), Year of construction: 2015, operating hours: 3,750 h, functionality: fully functional, power: 294.2 kW (400.00 HP), first registration: 10/2015, overall weight: 22,000 kg, color: red, operation weight: 15,000 kg, tire size: 26,5 x 650, loading space volume: 25 m³, total height: 4,000 mm, maximum speed: 40 km/h, working width: 2,550 mm, Equipment: additional headlights, hydraulic folding, trailer coupling, Greentec 962/20, a chipper combination with a high-tipping hopper with a capacity of 20 m³. Hodpfswk N Ekjx Aaconu Equipped with a Palfinger M70 crane, mounted on a 40 km/h chassis with a tandem axle and a K80 trailer coupling. The drum chipper unit was completely refurbished 500 hours ago with a new, current drum version (weight approx. 2 tons, blade system, 40 mm drum wall thickness, drive train designed for a maximum of 400 hp). All wear parts in the chipper area, as well as the brakes, have been completely replaced. Ideal for collecting material from streets and parking areas; there is space for the traffic control panel at the rear. Tires are in mint condition. Viewing in operation is possible and desired by arrangement!

Condition: excellent (used), 37 kW motor 4 knives throat 160x400 mm Roller motors 2x 1.3 kW Vibration motor 2.2 kW Vibrating chute with magnet, dimensions 1900x400 mm Hnjdpfx Asvc Atmoaceu

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 Hsdpfx Aecbtpkjacenu The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Technical data: Hopper opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pcs + 2 pcs Type and size of knives: concave / 40 x 40 mm, reversible knives concave / 30 x 30 mm, scraper knives Screen perforation: 15/20 mm Paint finish: RAL 5010 / 7016 Connection value: 400 V +/- 5 % / 50 Hz Included: Control cabinet (Rittal) incl. 5 m cable Electrical control system (Moeller / Siemens) Star-delta start, rubber vibration dampers E-rotor with machined knife pockets Gearbox limit switch 1st knife row Hold-down device on slide for long and large parts Special scraper knives to prevent lateral jamming Weight: 1100 kg Hjdsvymdwepfx Aaconu Availability: short-term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Offered is a Treif Puma-CE pork chop chopper in good used and working condition. The unit runs on 380V, 16A, 3.4 kW, is made entirely of stainless steel, has a continuously variable speed, and has a large shaft. It was workshop tested. It was approved in 2008. Hnedpfev Tyz Nsx Aacju Further information is available upon request. Cash or prepayment! Sale to businesses only. No guarantee or warranty.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Offered is a chop cutter from Treif, model Puma-CE 700F, in good used and fully functional condition. The machine operates on 380V, 16A, 3.4 kW, is made entirely of stainless steel, has stepless speed control, and a large feed chute. Year of manufacture: 2004. Further details upon request. Cash or advance payment! Sale only to commercial buyers, no warranty, no guarantee. Hsdpfx Aewyxt Asaconu

Condition: new, The ZSH chipper series is specially designed for forestry, horticultural and municipal operations. Mainly these chippers are used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The wood chips produced are suitable for combustion in wood chip heating systems with screw conveyors or also as a preliminary stage in pellet production. The machines are robust, reliable, easy to operate, powerful and produce wood chips of consistent quality and size. Hnodpfxjghgi Eo Aacju Other Low-cost solution for the production of wood chips l Compact design l User-friendly l Low energy consumption

Condition: used, mileage: 36,686 km, power: 460 kW (625.43 HP), first registration: 12/2016, overall weight: 36,000 kg, fuel type: diesel, color: red, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, soot filter, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (via Tel. . Mercedes-Benz Arocs TUROX Eschlböck Biber 92—Superstructure: Eschlböck Biber 92 Crane: Epsilon S110F104 Drive configuration: 8x8-4 Chipper operating hours: only 1,512h! Numerous pictures and videos available Upon request, we are happy to provide you with a leasing or financing offer. Mr. Seidel (Tel. ) will be pleased to assist you. For further information, please visit our homepage. Hedpfx Aasw Hu Ucocenu !!! Errors, technical changes and prior sale reserved !!!

Condition: used, mileage: 36,686 km, power: 460 kW (625.43 HP), overall weight: 36,000 kg, fuel type: diesel, color: red, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, first registration: 12/2016, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, soot filter, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (via Tel. . Mercedes-Benz Arocs TUROX Eschlböck Biber 92—Superstructure: Eschlböck Biber 92 Crane: Epsilon S110F104 Drive configuration: 8x8-4 Chipper operating hours: only 1,512h! Numerous pictures and videos available Upon request, we are happy to provide you with a leasing or financing offer. Mr. Seidel (Tel. ) will be pleased to assist you. For further information, please visit our homepage. Hsdpsw Hu Tfsfx Aaconu !!! Errors, technical changes and prior sale reserved !!!

Condition: used, Höcker Polytechnik Multistar VQ 12/6 extraction system consisting of: * Multistar VQ 12/6 filter system * 4 extraction fans * Hacker rsn type SL300/24/S * Spark extinguishing system (out of service) Available from September 2025. Hedpowrxi Ijfx Aacjnu

Condition: used, Year of construction: 1984, power: 55 kW (74.78 HP), Hacker Lindner The geared motors were renewed a few years ago with metal detector 55 kW Hnsdsxga I Sopfx Aacju

Condition: like new (used), Year of construction: 2022, operating hours: 1,500 h, functionality: fully functional, Votecs hacker, as good as new, for sale at a reasonable price. Hnedpfx Aasvv H Afjceu Main engine power 45 KW. Similar to Weima or Rainbold

Condition: new, Year of construction: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. Hjdonq Aibopfx Aacsnu An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling and cleaning of materials and components. These are absolute professional devices. Ideal for vintage car restorations and in the automotive and metal and plastics industry. We are happy to help you find a solution and can test your project here in the factory. The handling of the machines is easy to learn. Hnjdpfsiq I Nlsx Aacsu

Condition: new, Year of construction: 2025, laser hours: 20 h, laser power: 3,000 W, laser wavelength: 1,060 nm, sheet thickness steel (max.): 12 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 3,600 kg, total length: 8,600 mm, total width: 1,400 mm, total height: 2,400 mm, working range: 6,100,230 mm, Equipment: cooling unit, ATTENTION: Demonstration machine - The K-Series sets standards in price and performance - it is a space-saving alternative to conventional tube laser cutting machines, and at an unbeatable price. With a length of just over 8 meters, it fits into almost any workshop. The time required to process bar stock such as round, rectangular, square tubes, and profiles is reduced to a minimum. Fully automatic or semi-automatic loading is also available. Hedpoh Igimjfx Aaconu

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, input current: 16 A, Equipment: type plate available, Migatronic TIG DC HP Hodpfovbyazox Aacsnu Excellent TIG welding machine with the best working settings. Designed for complex welding tasks in the field. The ideal service and assembly machine.

Condition: new, Year of construction: 2023, Laser welding machine with 2 Kw laser power, laser components from Siemens welding machine with real CE and thus German manual, risk analysis and everything that belongs to be allowed to operate a laser welding system in Germany. Wire feed case, also with real CE, is also included. An instruction can take place here in the company. Hedpfx Aaen Sl Dbscenu