Condition: new, Year of construction: 2024, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. Duebod A Nc Ds E H Ty Sjt - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 15914, PRESS RUNNER MACHINE TYPE: EPT63 YEAR BUILT: 1999 MACHINE NUMBER:15914 MACHINE DATA Pressing force: 630 KN Idle noise: 69.2 dB Drive power: 22+4 KW Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Oil quantity: 285 liters. Weight: 6000kg TRAVEL DISTANCE MEASUREMENT: Overtravel: 20mm Follow-up time: 90ms Safety distance: 180mm DIMENSIONS: Installation height max: 600mm Ram stroke max: 400mm Throat: 280mm Table height: 850mm Dusb E H Terypfyjy Sjt Table width: 630mm Table depth: 500mm

Condition: good (used), Year of construction: 1998, AGEO SP 60 / 1000 Four-column manual screw press Deb E H Tysvc Ubpo Ssut -CE-mark -year of construction 1998 -Pressing force 60 tons -Four guide columns -Hydraulic return stroke -Clear width between the columns 1000mm -Slot table 900x700mm -Height passage approx. 415mm Dimensions: LxWxH 1.8x1.6x2.5 meters / weight 3.5 to Errors / input errors excepted

Condition: used, Year of construction: 1997, pressure 63 t throat 315 mm stroke 8 - 120 mm no. of strokes 56/90 Hub/min daylight (stroke down, ram adjustment above) 445 mm ram adjustment 70 mm table surface area 800 x 630 mm hole in the table 280 mm Djb E Hjvu E Hye Ty Ssut T-slots at tabel 3 clamping plate 790 x 610 mm clamping plate thickness 65 hole in clamping plate 120 mm t-slots at bolster plate 2 ram surface 500 x 400 mm T-slots at ram 2 width of T-slots 22 mm total power requirement 17,5 kW weight of the machine ca. 6 t dimensions of the machine ca. 1,52 x 2,12 x 2,84 m Machine equipment: - Circulating lubrication - Ratchet for ram adjustment - Break plate (new) - Clamping plate - Footswitch - Cam switch mechanism - safe for hand inlay work - CE documentation + declaration of conformity The following work should be carried out on the machine: - new separate control cabinet with touch panel and ABB safety control - Work area enclosure with ESPE - A current UVV test and braking time measurement is carried out before delivery

Condition: new, Year of construction: 2025, machine/vehicle number: 25.05.08, Fresan FP 60P - C Frame Eccentric Press - 60 Tons (600kN) TECHNICAL DATA: * Power: 60 tons (600kN) * Strokes Per minute: 65 * Ram-Table Distance: 365 mm * Stroke Adjustment: 0 - 100 mm * Ram Adjustment: 70 mm * Table Dimensions: 500 x 700 mm Dsb E H Tsnwpc Ioy Ssut STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces (6-slide version available, optional) * Mechanical fuse for overload protection * Pneumatic counterbalance cylinders * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: good (used), Sold is a die cutter from the company Bruderer. Model BSTA 20. The press pressure is 20 tons. Duob Eei Ey Aho H Ty Sjt For further technical questions please feel free to contact us.

Condition: good (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 100k-400, total height: 6,200 mm, total width: 4,100 mm, total length: 3,000 mm, installation height: 1,200 mm, overall weight: 45,000 kg, pressing force: 400 t, operating pressure: 300 bar, operating speed: 400 mm/s, pressure phase: 10 mm/s, ram plate length: 1,300 mm, ram plate width: 1,600 mm, ram stroke: 800 mm, reverse speed: 350 mm/s, table length: 1,300 mm, table height: 800 mm, table height above floor: 800 mm, table width: 1,600 mm, Equipment: safety light barrier, This is an exhibition machine from our showroom in southern Germany Dujb Eettrizs H Ty Sot

Condition: ready for operation (used), Year of construction: 1975, Functionality: fully functional, CAPACITIES / CAPACITIES Fuerza máxima / Max force: 250 Tn Max pressure / Max pressure: 200 Kp/cm2 Fuerza max cushion force / Max cushion force: 100 mm Presión max cojín / Max cushion pressure: 318 Kp/cm2 Potencia / Power: 34.5 cv EQUIPADO CON / EQUIPPED WITH Deb E Houl Umts Ty Seut - Doble botonera / Double push button panel - Mesa Bolster 1800x1400 mm / Bolster table 1800x1400 mm - Cuadro eléctrico nuevo (2013) / New electrical cabinet (2013) - Barreras fotoeléctricas normativa CE / Light curtains - CE standards

Condition: refurbished (used), Year of construction: 1992, machine/vehicle number: 131 644, Attention: machine has been 2022 completely mechanically and electrically retrofitted before delivery press force: 1000kN stroke: 30 - 100mm slide adjustment: 80mm speed: 50 - 300/min shut height. 350mm table dimensions: 1080 x 800mm slide dimensions: 900 x 620mm Dob E H Tyefn Affo Ssut new electrical controller SIEMENS S7 1500

Condition: new, pressure 300 t stroke 600 mm working feed 9 / 14 mm/sec column daylight 1550 mm 600 adjustment of press crosshead 1500 mm slide adjustment -horizontal 3000 mm feed speeds 9 mm/sec return speed 14 mm/sec total power requirement 18,5 kW weight of the machine ca. 35 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors Dujbjvxw Hmo E H Ty Sot - Pressure adjustable via PLC Price on request

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: 25.05.08, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: Deb Esnxh T Re H Ty Seut * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: used, Year of construction: 1996, Functionality: unexamined, machine/vehicle number: VS120/ZR11728, Equipment: documentation/manual, safety light barrier, We offer a Mabu VS120 from the year of construction 12/1996 with feed for sale. Deb Eovb T Hbj H Ty Sjut The machine is used. If you are interested or have any questions, please do not hesitate to contact me.

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 230958, ram adjustment: 110 mm, table width: 1,120 mm, table length: 805 mm, pressing force: 250 t, stroke distance: 140 mm, General condition: Used, good, fully functional Usage information: No dealers, machine ran on average less than 4 hours per day Delivery: the machine can also be dismantled and loaded - the additional costs are approx. € 1,450 Dueb E H Tysvb Up Do Sst TECHNICAL DETAILS Nominal forming force: 2,500 kN Clamping: 360 mm Stroke (changeable within the range): 30 - 140 mm Adjustability of the ram downwards: 110 mm Max. stroke rate: 45 rpm Usable stroke rate: 25 rpm Working path: 2.6 mm Clamping surfaces Clamping surface table: 1,120 x 805 mm Table top thickness: 110 mm Clamping surface ram: 800 x 475 mm Opening in the table top: ø320 mm Clamping opening in the Ram: ø410 x 560/320 mm Through hole in the table: ø65H7 / 105 mm Flywheel and motor Dimensions of the flywheel ring: ø1,300 x 280 mm Flywheel revolutions: 228/min Motor power: 22 kW Electric motor revolutions: 1,450 rpm MACHINE DETAILS Working voltage: 3 x 380 V Mains frequency: 50 Hz Compressed air connection: 0.4 – 0.6 MPa Air consumption per engagement of the clutch: 28 dm³ Machine dimensions (L x W x H): 2,660 x 1,350 x 2,975 mm Machine weight: 12,800 kg

Condition: used, Year of construction: 1980, pressure:24 t table length:1060 mm table width:650 mm Smallest opening:165 dimensions of the machine ca.:1300 x 700 x 1500 mm Dueb E H Teufufboy Set This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: new, Technical data: Capacity: 60 t Installation height: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Forward speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Generous working area - Height-adjustable table - Torsion-resistant design made of welded steel Deb E H Tyok Nz Ndo Sjut - Pressure gauge - Fine pressure adjustment - Additional hand pump

Condition: good (used), Year of construction: 1988, Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Duob E H Tovvh U Aey Sot Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes 630 kN --- ---

Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: A6493, Overhauled 50 t HEILBRONN C-press suitable for manual loading work, available at short notice. Hydraulic clutch/brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc. Dimensions - see machine drawing as PDF. Technical data: Pressing force: 500 kN Speed: 100 /min.(variable speed optional) Variable stroke: 8 - 100 mm ram adjustment: 80 mm Installation height: 400 mm (max. stroke at bottom, adjustment at top) Table: 650 x 500 mm Dusb E H Tsvdp Awey Sjt Plunger: 400 x 250 mm Projection: 350 mm Max. drive power: 4kW Weight approx.: 4,000 kg

Year of construction: 1950, Condition: used, Weight: 135 kg Forward force: 2 t Operating pressure: 52 atü Duob Eogv U N Io H Ty Sst Stroke: 160 mm

Condition: good (used), Year of construction: 1990, 1. machine data Manufacturer: Hydrap Pressen Maschinenbau GmbH Designation: Hydraulic pressure press Type: HPDZb 250 M-No.: H40/ 6323 Year of construction: 04/1990 Weight: 30 tons Depth x width x height: 4 x 4.5 x 6 m 2. connection data Mains voltage: 380V Frequency: 50 Hz Output: 55 kW 3. technical data Distance between the stands: front 1350 mm Lateral 720 mm Nominal force: 2500 kN Number of pressure pistons: 1 Clamping table: 1,300 x 1,000 mm Djb Eet D Eive H Ty Sjut Stroke adjustment: 450 mm 4. general The drawing cushion is defective and must be repaired. The machine is available immediately. The machine has been disconnected from the mains as it had to be relocated due to conversion work. The sale is ex works: dismantling, removal, loading and transportation are at the buyer's expense.

Condition: not inspected (used), Year of construction: 1961, machine/vehicle number: 64/61, Müller Weingarten press 1600 kN, pitch 8 ER 160 Year of construction 1961 Pressing force 1600 kN Maximum sheet thickness 14 mm Ram stroke 20-120 mm Ram adjustment 100 mm Djb Esruahhs H Ty Sjut Stroke rate 45 / min

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table Dueb E Hep Dt Uus Ty Set - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: used, Year of construction: 2008, USED PLASTIC INJECTION PRESS brand HT 1200-GOLD (Italy) year 2008 Dujbjvw A Hpj E H Ty Set A PLASTIC INJECTION PRESS brand HT MIR 1200-GOLD (Italy) Force 1200 Tns. / Extraction force 215 Tns Moving table stroke 1300 mm Dimension between columns 1250 x1250 mm Serial No. 0807120018756 / Year 2008 Total motors 163.55 KW / 400 V Force 1200 Tns. Weight approx. 33,000 Kgs

Condition: reconditioned (used), Year of construction: 2017, operating hours: 20,000 h, Functionality: fully functional, Straightening force 30 tons, max. center width 1080 mm, movable straightening hammer, 1 straightening point, 2 anvils, 1 measuring probe for straightening position, 2 reference measuring probes, further options possible (further straightening points, walking beam conveyor through the machine, Dob E H Tsu Urx Doy Seut New Simatic S7-1500 control system

Condition: new, Technical data: Capacity: 200 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2100 mm Depth: 1200 mm Height: 2850 mm Weight, approx.: 2600 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Deb E H Tspl T Diey Sout Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: used, Year of construction: 2008, Functionality: unexamined, Auction of PLASTIC INJECTION PRESS brand HT MIR GOLD-800 (Italy) Used PLASTIC INJECTION PRESS brand HT MIR (Italy) Model 800-GOLD Duob Ejvw A E So H Ty Sjt Year 2008 Serial No. 0807070019166 Motor 119 KW / 400V The press can be visited in the factory (not working)