Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. Csdpfx Aoyvpxzecvsgr The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Cedeyvpxnopfx Acvsgr A total of four dryers of this model are available.

Condition: used, Friction washer with stainless steel housing and stainless steel rotor. Cedpeyvpxhjfx Acvogr Motor 22 kW

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Cgodpfeyvpw Rex Acver Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Cjdsyvpv Tepfx Acvegr Rotor knives: 4

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The hot runner controller from Hasco is for sale, including a few technical details. An operating manual is available in both German and English. Number of zones: 6 Dimensions: 434 mm x 226 mm x 365 mm Cjdpfxeyxa Npe Acvegr Operating temperature: 0–50°C Display per zone: 2x three-digit, 7-segment display Control panel: 12 keys Electrical connection with CEE plug: 3x32A

Year of construction: 2019, condition: excellent (used), functionality: fully functional, The mobile dry air dryer of type KKT dries hygroscopic granulates directly next to your processing machine, and is also equipped with a TYPE 608 conveying unit. The saturated dry air flows through two alternating desiccant containers, where it is re-dried. This creates ultra-dry air with a dew point of approx. -35 °C. Dry air dryer: KKT 100S Dry air flow rate: 100 m³/h Cjdpfx Aceyxay Iovjgr Desiccant containers: both NEW Container volume: 200 liters Mobile design Convenient touchscreen menu navigation Conveying unit: TYPE 608 Number of material types: 1 Blower: 1.1 kW Capacity: 8.5 liters Voltage: 230/50

Condition: used, Vickers Drive DBM-03 / DBM-L2A / CG1616 03- for 2 axes: 25/70 ECC 50/140 ECC - removed from Ferromatik E50 - removed from running machine - fully functionalmanufacturer: Vickers type: DBM-03 / DBM-L2A Csdpfx Asyxg Tzjcvjgr manufacturer no.: CG1616 03 spare part no.: 1676559190

Condition: used, B&R 2005 CPU module CP152- removed from Ferromatik E50 - removed from running machine - housing renewed Codpfeyxg Tujx Acvsgr - compatible with all B&R 2005 controls - fully functionalManufacturer: B&R type: CP152 spare part no.: 1676890710, 10010792 manufacturer No.: 3CP152.9

Condition: used, B&R 2005 NC150 counter module - housing renewed - compatible with all B&R 2005 controls - removed from Ferromatik E50 - removed from running machine - fully functional Csdpfx Aceyxg Tnjvjgr manufacturer: B&R type: B&R 2005 sparepart no.: 11124276 manufacturer no.: 3NC150.6

Condition: used, MOOG D920-141 control valve- removed from running machine - fully functionalmanufacturer: MOOG type: D920-141 type code: R08KB910HXYX Cgedpoyxg Thofx Acvor

Condition: used, Ferromatik mixing screw Ø 70 mm for IU2495 and IU2650- removed from Ferromatik K-Tec 450 Cgsdsyxg Tbopfx Acvor - removed from IU2495 - removed from running machine - fully functional- inlet: 69.80 mm - center: 69.80 mm - outlet: 69.80 mm - total length: 225.80 cmmanufacturer: Ferromatik Milacron

Condition: used, Harmonic Drive planetary gearbox HPS-180-5-Di- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine Cgodpfx Acsyxg S Revor - fully functionalmanufacturer: Harmonic Drive type: HPS-180-5-Di spare part no.: 12171266

Condition: used, Rexroth proportional directional control valve with regulator- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - fully functionalmanufacturer: Rexroth type: NG10 Cjdpfxeyxg S Do Acvjgr spare part no.: 10848665 manufacturer no.: R900969493, R900031884 type code: 4WRSE 10 Q00-3X/G24K0/A1V-588=DE (4WRSE 10 Q00-32/G24K0/A1V-588=DE) / 4WRSE 10 V.-A1-32The number before the first slash describes the device series. For this reason, this number in the type code may differ from that on your old spare part. If you have any questions about this, please do not hesitate to contact us.

Condition: used, Demag Ergocontrol IBED NC4- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - 1 cover missing - no effect on functionality - fully functionalmanufacturer: Demag Cgedjyxg Swspfx Acvor type: NC4 spare part no.: 89380065 manufacturer no.: DIf the spare part is traded in an exchange procedure, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition or age of the returned part. The defective part must be in a repairable condition; the credit note will be issued after feedback from the manufacturer.

Condition: used, Year of construction: 2008, operating hours: 50,500 h, clamping force: 700 kN, Used injection moulding machine Manufacturer: Engel Model: VC200/70 Tech Year of manufacture: 2008 Cgsdpfx Acjyxd R Rovor 18 mm screw 50,500 operating hours Clean room Full technical details: see last image Location: Germany - Erzgebirge ____ Our General Terms and Conditions (GTC) apply. The seller accepts no liability for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial buyers and without warranty.

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Application: PVC PIPES Csdpoywr Tdefx Acvsgr SCREW NUMBER: 014.185605 r.920 S

Condition: excellent (used), Year of construction: 2006, Technical data Approximate dimensions on site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight (approx.): 33,000 kg Serial number: 161394 Item description Clamping unit Clamping force: 6,500 kN Distance between tie bars: 1,025 × 930 mm Min./max. mould height: 450 / 950 mm Maximum opening stroke: 1,800 mm Cgodpfx Aceyu Niiovor Injection unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g Electro-hydraulic equipment Rated power of pump motor: 55 kW Heating capacity: 62 kW

Condition: excellent (used), Year of construction: 2000, Technical Data Approximate dimensions at site (L × W × H): 8,000 × 2,250 × 2,200 mm Weight (approx.): 5,600 kg Product Description Serial number: 42503 Clamping Unit Clamping force: 4,000 kN Dimensions of mounting plates: 1,300 × 1,080 mm Min./Max. mould height: at least 350 mm Maximum opening stroke: 1,300 mm Injection Unit Screw diameter: 70 mm Codsyu Nc Aspfx Acvjgr Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar Electrical-Hydraulic Equipment Rated power of pump motor: 45 kW

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Csdpfxetyyn Hj Acvjgr

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production. Cgedpfx Acsx Uz Ncovsr

Condition: good (used), Various cooking accessories for sale. Detailed specifications and pricing available upon request. Please specify which products you are particularly interested in when making your inquiry. Available items: 1* Material bunker 4* Drying ovens 25* Separators 1* Koch CKT 500 dryer and several more products from other manufacturers, such as Digicolor or Colortronic. See pictures for details. Prices are subject to VAT. Inspection possible by appointment. Contact us; our team looks forward to assisting you. Cgodpfx Askzkz Recvsr Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,100 kN, screw diameter: 150 mm, total width: 1,400 mm, total height: 1,150 mm, overall weight: 77,000 kg, Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details. • Working hours: 86,200 h • Column diameter: 230 mm • Displacement: 10,955 cm³ • Injection pressure: 1330 bar • Ejection force: 215 N • Opening stroke: 1800 mm Cjdpfx Acjyuc Ursvegr • Heating capacity: 113 kW (153.64 hp)

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, A significantly large capacity Float/Sink tank available from this renowned English specialised manufacturer. All mechanical parts are in excellent order , and apart from re-assembly the equipment is ready to go to work . Estimated at a capacity of 4 - 5 tonnes per hour on Rigid materials, this represents extraordinary value, and is available in the UK avoiding Internationaal transport costs and taxes. An inclined friction washer and materials drier/cleaner are also available - photos included. Cedpfx Acow D Uggovsgr

Condition: reconditioned (used), functionality: fully functional, clamping force: 220 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22MA machine we are currently refurbishing. Please contact the team if you would like to see the machine in person. Cgodpeyfphajfx Acvsr