Condition: good (used), Pressure shoe for Weinig planer and moulder Hfjdjyryzkspfx Aaled

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Hfjdpfxjydk Tus Aalsd Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Hedpfoydk Tnsx Aalofd Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Hfodpfxsydk Thj Aalod Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: used, Weinig Powerlock L=240 Z=2 head with rebate cutter below Type 536, diameter 93 mm 536.095.04 Centrolock reversible knife system Z2 Hedpfxsydk Ryj Aalsfd Mounting: PowerLock HSK Length: 240 mm Price: 500 Euro

Condition: used, Set of 2x Weinig Powerlock L=270 Z=2 heads Model 536, diameter 93 mm 536.095.25 Top 536.095.24 Bottom Centrolock reversible knife system Z2 Mounting: PowerLock HSK Hjdpfoydk Rgox Aaljfd Attention: Price 600 Euro is for a set of 2 pieces

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Hfedpfxjydk Irs Aaljd Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: excellent (used), Number of boring spindles 4 St. Working width 180 mm Working height 120 mm Feed speed ca. 10 m/min m/min. Hodeykvagjpfx Aalefd

Condition: new, Year of construction: 2022, Working width: 520 mm Planer block: Tersa Number of knives: 4 Planing table length: 2300 mm Planing stop angle adjustable: yes Planing table folding: pneumatic Maximum thickness throughput of thicknesser: 250 mm Thicknessing table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: articulated Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Hjdpoiuldyofx Aalsfd Weight: 980 g

Condition: new, Year of construction: 2022, planing width: 520 mm planing shaft type: tersa number of blades: 4 sourface table length: 3000 mm table adjustment: electrically read out table height: digital Hodpfx Aajiqg Nwjljfd sourface fence adjustable: yes motor power: 7 kW suction connection: 120 mm machine length: 3005 mm machine width: 1460 mm weight: 870 kg

Condition: new, HM planer knives / NEW HM planer knife Hfodpfx Aaovnddksljd 860x35x3 mm from surplus stock available in large quantities Other lengths also available upon request We cut them professionally to your specifications

Condition: used, transversal substructure for planing machine Move the planing machine in order to be able to use the planer knives over the entire knife length and the zero line is retained REX Hobelmaschine Querverstellung REX planing machine transverse adjustment Réglage transversal de la raboteuse REX Length 2850 mm / width 2600 mm / height 250 mm + bracket 215 mm Hsdpfx Aaoimz Egolofd

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH 30 4-Sided Planer with additional unit: horizontal working spindle with outfeed unit 4-Sided Universal Planing Machine KUPFERMÜHLE Electrical system: 400 Volt / 50 Hz ...../58.5 kW Original paint in reseda green RAL 6011 Motor power and configuration (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle (bottom): 11.0 / feed 7.5 / thicknesser 3.0 Feed speed min/max: 5 – 30 m/min Working spindles: 5 units Extraction/Chip collection connectors: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max (2-sided): 15 mm / 300 mm Working height min/max (4-sided): 15 mm / 180 mm (OPTION: 250 or 300 mm) Key features: – Constant table height – Right-side guide fence – Interchangeable planer heads – Jointing device below and above – Slotted, replaceable tables for noise reduction – Outfeed unit with 2 driven rollers on top and double-guided upper section – Height adjustment synchronized with base machine Machine delivered in refurbished and tested condition, with functional warranty Hfodpfjx Ehfcsx Aaled Further options: – New paintwork – Repainting – General overhaul etc. etc.

Condition: excellent (used), CATALOG NUMBER 7917 TECHNICAL DATA - Shaft width: 400 mm - 4-knife cutter block - Noise-reducing riving knife - Cutter block guard - Table length: 2610 mm - Extra-long infeed table: 1430 mm - Cast iron tables - Both tables adjustable - Original tilting fence - Motor: 3 kW - Dimensions (L/W/H): 2610x1000x1000 mm - Weight: 660 kg ADVANTAGES – Italian production, SCM brand – 4-knife cutter block – Noise-reducing riving knife – Extra-long infeed table – Used jointer, in very good condition Hjdpfx Aaeyrr Hfslsfd Net price: 9500 PLN Net price: 2260 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7914 TECHNICAL DATA - shaft width: 640mm Hsdpfx Aeyrr A Hjalofd - number of knives: 4 pcs - max thickness of processed element: 250mm – top side: - anti-kickback fingers/rejectors - toothed feed roller, driven - pressure unit - planing shaft - pressure unit - smooth outfeed roller, driven – underside: - adjustable rollers in the lower table: 2 pcs - main motor: 7.5kW - electric table lift - lifting motor: 1.1kW - 2 feed speeds - feed motor: 1.3kW - dimensions (L/W/H): 1130x1300x1200mm - weight: 1026kg ADVANTAGES – made by Polish brand JAROMA – electric table height adjustment – DTR documentation provided – used thickness planer, in very good condition Net price: 16900 PLN Net price: 4030 EUR (at an exchange rate of 4.2 EUR) (Prices may change with larger rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7915 TECHNICAL DATA cutter head width: 640mm number of knives: 4 pcs max thickness of processed element: 200mm – top: anti-kickback fingers/ejectors serrated infeed roller, powered pressure unit planing cutter head pressure unit smooth outfeed roller, powered – bottom: adjustable rollers in lower table: 2 pcs Hfsdpfx Aasyrrzpelod motor: 7kW variable feed speed control Dimensions (LxWxH): 1800x1250x1150mm weight: 1250kg ADVANTAGES – Made in Bulgaria – Variable feed speed control – Used thickness planer in very good condition Net price: 9500 PLN Net price: 2260 EUR based on 4.2 EUR rate (Prices may vary with major fluctuations)

Condition: excellent (used), CATALOGUE NO. 7916 TECHNICAL DETAILS - Working width: 510 mm - Number of knives: 4 pcs - Max thickness of workpiece: 300 mm – From above: - Kickback pawls - Gear-driven, pull-in, oscillating feed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth, driven outfeed roller – From below: - Adjustable feed roller in the lower table, 1 pc - Motor power: 6.8 kW Hfjdsyrrruspfx Aaled - Electric table lift - 4 feed speeds: 5 / 10 / 15 / 20 m/min - Extraction port diameter: 170 mm - Dimensions (L/W/H): 1120 x 1000 x 1100 mm – weight: 650 kg ADVANTAGES – Manufactured by the Italian brand CASADEI – Max planing height: 300 mm – electric table lift – One powered roller installed in the table supports machine feed – Thickness planer used, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR (at a rate of 4.2 PLN/EUR) (Prices may vary depending on further currency fluctuations)

Condition: used, Year of construction: 1998, working width: 510 mm cutter head: stripe knife number of blades: 4 sourface table length: 2250 mm surface fence adjustable: yes maximum workpiece thickness: 220 mm Höhenverstellung Dickentisch: manual read out for thicknesstable: scala speeds: 4 / 6,5 / 10 / 16 m/min infeed roller: steel outfeed roller: steel table roller: no motor power: 5,5 kW Hsdpjxnhpajfx Aalsfd motor brake: yes suction connection: 120mm machine length: 2250 mm machine width: 1100 mm weight: 800 kg

Condition: used, Year of construction: 2003, working width: 510 mm cutter head: Streifenmesser number of blades: 4 Hfodsxgn N Rspfx Aalsd surface table length: 2000 mm fence tilting: ja surface table fold up: manuell maxilum thickness planing height: 230 mm height adjustment thickness table: electric read out table height: digital feed speed: 7 / 14m/min infeed roller: Stahl outfeed roller: stahl pressure beam: durchgehend table roller: ja motor power: 5,5 kW motor brake: ja suction connection: 160mm machine legth: 2200 mm machine width: 950 mm weight: 800

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 300 mm, number of spindles: 10, No minimum price – guaranteed sale to the highest bidder! The machine can be used either as a standalone unit or as part of a complete system: - Joulin vacuum lifter + stacking task & feeding (Search ID: 21264612) - Canali ML 1100 TWIN F.L. 30 H.S. band resaw (Search ID: 21264817) TECHNICAL DETAILS Working width: 300 mm Feed rate: 140 m/min to 200 m/min MACHINE DETAILS Spindle configuration: Horizontal spindle Right vertical lift spindle Left vertical lift spindle Horizontal lift spindle Right vertical lift spindle Left vertical lift spindle Top horizontal spindle Bottom horizontal spindle Bottom horizontal spindle Bottom horizontal jointer spindle EQUIPMENT 10 spindles Multiple lift spindle system NC control All spindles with support bearings (hydraulic clamping) Hedeyk Tvlopfx Aalefd Planer table Precision work in terms of dimension and angle

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed 6000 rpm Tool travel radius 125 - 180 mm Folding device Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed 6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed 6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed 6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed 6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed 6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Hodpswqr Rvjfx Aalofd Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central position of lubrication poi...

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) Hjdpfox Hkp Nex Aalofd 9-Uni (11 kW) 5 driven rollers in the table

Condition: excellent (used), Catalogue number 7835 TECHNICAL DATA - Shaft width: 410 mm - Noise-dampening comb - Number of knives: 4 pcs - Table length: 2500 mm - Cast iron tables - Both tables adjustable - Original angle-adjustable guide fence - Motor: 4 kW - Electric brake - Extraction port diameter: 125 mm - Dimensions (L/W/H): 2500x820x1210 mm - Weight: 910 kg Hfodpfx Asx Armxsaled ADVANTAGES – Made in Poland – Top control panel – 4-knife cutter block – Used jointer – Very good condition Net price: 15,900 PLN Net price: 3,790 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: good (used), Year of construction: 2003, functionality: fully functional, spindle diameter: 40 mm, planing width: 230 mm, working height: 120 mm, rotational speed (max.): 6,000 rpm, Equipment: cabin, Types: Profimat 26, Machine no.: 100272, Year of manufacture: 2003, 5-spindle: U-L-R-O-U, Working width: 20-230 mm, Working height: 8-120 mm, with Ahtue Neumann feed unit Hjdpoyq Ab Rofx Aalsfd

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: V 117812, input voltage: 380 V, input current: 11 A, Machine is in very good condition - Electric height adjustment and handwheel adjustment - Newly fitted bearings - New knives installed - Gearbox lubricated Hfodpfx Aasyt Nx Usljd - New protective lamellae installed - Planing width: 630 mm - Planing height: 250 mm - Feed speed: 8–20 m/min - Extraction nozzle: 160 mm - Weight approx. 870 kg - Rubber-coated infeed and outfeed rollers - Two-knife cutterblock with strip planing knives - Central lubrication - Star-delta switch