Used pillar drills with 30-39mm drilling capacity for sale (187)

Condition: new, Year of construction: 2026, bore capacity in steel (diameter) 32.0 mm 35.0 mm bore stroke 150 mm M 22 (St 60) throat 300 mm 0.1 - 0.2 mm/U MK 4 480 x 480 mm 80.0 - 1.170 U/min 0.90 / 1.35 kW Hfjdpex Dngkefx Ahnei 340 kg 800 x 1000 x 2000 mm Manufacturer's list price: 8.665 EURO Special price on request Equipment: - Column drilling machine - "V-belt drive" - infinitely variable speed adjustment - Manual automatic spindle feed - Thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - Height-adjustable work table * Adjustment with hand crank - Right/left rotation of the drill spindle - Machined machine base incl. coolant device - Machine/work light - Folding drill spindle guard - Emergency stop button at the front - CE marking + instruction manual

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm Hfsdpfx Aoyvvq Dohnsi throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Hfodszcnnaepfx Ahnsi Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Column drilling machine / ALZMETALL AB 3 ES - Well-maintained, original condition - Drilling capacity / steel max. 35mm - Arm reach approx. 280mm - Table size approx. 600x470mm Hfsdpfx Ahozkv N Tenei - Drilling stroke approx. 180mm - Taper shank MK 3 - Stepless speed control - Speed range 65 - 1750 rpm - Drilling depth stop - Spindle guard - Emergency stop - Foot switch - Analog speed display - Drill chuck - Documentation Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight approx. 500 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, Data : Hfodpfszl Exmox Ahnsi Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm .

Condition: good (used), functionality: fully functional, total width: 940 mm, total height: 1,850 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, This Bimak Mod. 35 MT/C is a well-maintained column drilling machine equipped with a cross table and features a Mitutoyo digital readout on two axes. Hfsdext Ivkopfx Ahnoi The machine supports both clockwise and counterclockwise rotation, which can be easily switched using a foot pedal for efficient operation. The Laip quick-change system includes ten tool holders, consisting of two drill chucks and seven collet holders, providing flexibility for various drilling and tapping tasks. An additional collet holder is required for milling operations with this machine. This holder is not included but can still be ordered as new. Manufacturer: Bimak Model: Mod. 35 mt/c Condition: Used Mains voltage: 400V Drive: V-belt Spindle taper: MC4 Spindle stroke: 150 mm Automatic spindle feed: No Speed ranges: 14 (45 - 1650 rpm) Digital readout: Mitutoyo Coolant pump: Yes Reversible (CW/CCW): Yes Cross table dimensions: 600 x 240 mm Machine dimensions: 940 x 1100 x 1850 mm (Width x Depth x Height) Motor: 0.8 / 1.5 kW See website for a video of the machine in operation.

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting capacity: M 20 Hfsdpeb Eli Hefx Ahnoi Drilling depth: 125 mm Overhang: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Overall height: 1,855 mm Weight: 250 kg Motor with pole switching: 0.8/1.5 kW Spindle speeds, stepless Range A: 80 - 1,440 min-1 Range B: 180 - 3,200 min-1 Digital display for speed, standard.

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Hfsdpfx Ahoqfdywonji Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: new, Technical Specifications: Tool Holder: MT 3 Drilling Capacity: 25 mm Drilling Depth: 120 mm Throat: 250 mm Hfsdpfx Aevnrgaohnji Speed Range, Continuous: 0 - 2000 rpm Table Size: 470 x 420 mm Column Diameter: 100 mm Motor Power: 0.75 kW Weight, Approx.: 200 kg Dimensions (W x D x H), Approx.: 630 x 850 x 1760 mm Features: - Continuous speed adjustment with digital display - Height-adjustable spindle guard with micro limit switch - Base plate with T-slots - Emergency Stop Push Button - Star Grip - CE

Condition: new, Modern, precision pillar drilling machine based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and series-standard chip breakage control. The digital display shows feed rate, speed, and drilling depth. Reversible switch for right/left rotation. Emergency stop button. Full motor protection. Pre-configured machine with special equipment including a threading unit, single-cut function, and LED lamp. Hjdpsf Ey Auefx Ahnsfi Normal drilling capacity in E 335: 30 mm Threading capacity: M 20 Spindle: MK 3 Feed rate steplessly adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Overhang: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Motor with pole change: 0.8/1.5 kW Spindle speeds steplessly adjustable: Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Threading unit - Single-cut function - LED lamp

Condition: new, Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting capacity: M 12 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds, continuously variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Power supply: 400 Volt, 50 Hz Features: - Thread cutting device - Digital display for speed, standard - Coolant system - LED machine light - Continuously variable speed control - 24 V electrical system - Base plate with T-slots Hsdpfx Ajd R Acbshnefi - Drilling table adjustable via rack and pinion and pivotable around the column - Emergency stop button - Full motor protection - Star handle - CE compliant

Condition: new, Drilling capacity max.: 35 mm Threading: M 24 Tool holder: MK 4 Spindle speeds, stepless: 65 - 2000 rpm Overhang: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Hsdpfx Aed Sd Tvshnsfi Column diameter: 115 mm Table size / T-slot size: 685 x 485 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Features: - Vario drive for stepless adjustment of the desired speed - Quill feed manually or via mechanical feed - Set speed can be quickly and easily read on the digital display - Stable cast iron table with T-slots and coolant channel - Adjustable drilling depth stop, drilling depth can be read on a scale - Threading device - Gearbox pre-selection - CE / IEC, German documentation and German service Scope of supply: - Table clamp and height adjustment from the front - Quick-change drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool holder: MK 3 Spindle speeds, stepless: 150 - 2500 rpm Overhang: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Features: - Vario drive for stepless adjustment of the desired speed - Quill feed can be operated manually or via mechanical feed - Set speed can be quickly and easily read on a digital display - Sturdy cast iron table with T-slots and coolant trough - Adjustable drilling depth stop, drilling depth can be read on a scale - Thread cutting device Hjdpfx Ahsd R Nv Ijnefi - CE / IEC, German documentation and German service Scope of supply: - Quick-change drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Hfjdpfx Ahop Duagonsi Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

Condition: used, machine/vehicle number: 5961, power: 1.3 kW (1.77 HP), input voltage: 400 V, height adjustment type: mechanical, rotational speed (max.): 2,250 rpm, rotational speed (min.): 80 rpm, total width: 600 mm, total length: 1,000 mm, total height: 1,800 mm, throat depth: 293 mm, table width: 420 mm, table length: 300 mm, overall weight: 280 kg, Equipment: rotational speed infinitely variable, ALZMETALL AX 3 SV Pillar Drill Technical data / Features: Manufacturer: ALZMETALL Type: AX 3 SV Serial number: 5961 Spindle taper: MK 3 Spindle travel: 120 mm Overhang: 293 mm Hsdpfx Ahjzi A Nkjnsfi Table size: 420 x 300 mm Column diameter: 110 mm Continuously variable speed control 80 - 2250 rpm (in 2 gear stages + 2 motor stages) Automatic quill feed: 0.1 / 0.2 mm/rev Electrically monitored spindle guard Emergency stop button Quick-change drill chuck Weight: approx. 280 kg Space requirement: 1000 x 600 x 1800 mm (L x W x H) Technical data subject to change without notice.

Condition: new, Year of construction: 2022, bore capacity in steel (diameter) 35 mm throat 350 mm bore stroke 180 mm thread dia. M 24 mm feeds 0,1 - 0,2 mm/U spindle turning speed range 100 - 1450 U/min spindle taper MT 4 Hfsdoy H Nvbjpfx Ahnei table surface area 560 x 385 mm Distance spindle/table max. 780 mm distance spindle/base plate 1320 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, • left-/right rotation of spindle, • adjustable chip protection

Condition: used, Year of construction: 1997, Technical details: bore capacity in steel (diameter): 32 mm x-travel: 750 mm y-travel: 520 mm drill capacity in cast iron: 45 mm revolution per minute: 90 - 4500 U/min feed steps: 6 bore spindle stroke: 250 mm boring spindle diameter: 30 mm drill spindle - Morse Taper: MK4 vertical adjustment of the arm: 520 mm Hodpszgwgfjfx Ahnefi throat max.: 1000 mm throat min.: 250 mm column diameter: 400 mm swivel range of the arm: 180 ° table clamping surface LxW: 1150 x 800 mm total power requirement: 3,5 KW weight of the machine ca.: 2000 kg dimension machine xH: 1,7 x 1,07 x 2,61 m The KOVOSVIT VO 32 is a robust and versatile radial drilling machine designed for industrial applications. The machine is suitable for drilling, boring, countersinking, reaming, and tapping operations in steel, cast iron, and other materials. Thanks to its swiveling radial arm and large reach, even large and heavy workpieces can be machined conveniently without the need for complex repositioning. The machine features a massive cast-iron construction, a powerful main drive, and an automatic feed system. The drilling head can be moved along the radial arm, providing a large working area. Its solid design ensures high precision, reliability, and a long service life, even under continuous operation. *

Condition: excellent (used), Year of construction: 1979, machine/vehicle number: Masch. Nr.3650, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 380 V, type of input current: three-phase, tool diameter: 32 mm, spindle mount: MK 4, actuation type: electric, total height: 187 mm, throat depth: 300 mm, overall weight: 430 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Well-maintained ALZMETALL pillar drilling machine AB 35 S, machine no. 3650 Flange spindle, MK4 Overhang 300 mm Spindle stroke 160 mm Spindle speed 55-1500 rpm, stepless Spindle speed via 2 gear stages Drilling capacity 32 mm in steel, 45 mm in cast iron Space requirement 1.3 m x 0.9 m Height 1.87 m Weight 430 kg Collection only, cash payment only. Hfedpfxszicxro Ahnji

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Here are the most important technical data and features at a glance: Technical Data Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Hedezdqdlopfx Ahnsfi Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Distance spindle - table min. 132 mm / max. 724 mm Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: excellent (used), Column drill press, bench drill press, drilling machine (used) Manufacturer: MAXION Type: BS 25 Drilling capacity in ST 37 steel: 30 mm Spindle taper: MK 3 Spindle speeds: 80 – 1400 rpm Spindle stroke: 120 mm Overhang: 260 mm Table size: 495 x 365 mm Column diameter: 120 mm Motor: 400 V, 0.7 / 1.3 kW Space requirement: approx. width 510 mm, depth 900 mm, height 1850 mm Weight: approx. 350 kg The machine is in very good condition, runs smoothly, and is ready for immediate use. Forklift available for loading onto a truck. Hfedpjzfpk Tsfx Ahnoi Affordable shipping possible. Location of the machine: 48477 Hörstel

Condition: used, Spindle Speed 80-3200 U/min. 30 mm 25 mm table surface area 500x365 mm bore depth 125 mm throat 260 mm MK 3 distance spindle /table 90-840 mm Hodpfxezdu Uuj Ahnsfi T-slot - width 14 mm column diameter 110 mm weight of the machine ca. 270 kg

Condition: excellent (used), Year of construction: 1989, Column drilling machine, make GILLARDON, type: GB 45 VE, year 1989, in good condition. Equipped with thread cutting device, coolant system, machine lamp, machine documentation. Spindle taper: MT 4 Spindle speeds: 40–1100 rpm, motor power: 2.2 kW Maximum drilling capacity in steel: 45 mm – 55 mm Maximum drilling stroke: 200 mm 3 feeds: 0.1–0.16–0.25 mm/rev Hfedpfxex Hr Ake Ahnei Maximum thread cutting in steel: M42 / M60 Table size: 560 mm x 450 mm Required space: 1.3 m x 0.8 m x 2.1 m, weight approx. 740 kg.

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption Hedpfx Aeza Hzgjhnofi - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: new, Year of construction: 2026, Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) Hedpolfdufjfx Ahnjfi R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1 = M30x3.5 / R2 = M24x3 / R3 = M36x4 Spindle MK IV Drilling depth: 160 mm Overhang: 300 mm Column diameter: 140 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without additional charge Additional charge for R3: € 2,250 Accessories drilling package 6 (€ 910.00) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: Free to your site including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Delivery time: immediately from stock Continuous/normal drilling capacity 35/40 mm Threading capacity max. M30 (dependent on pitch) Manual reversing switch for right/left rotation Undervoltage release, thermal overload protection Spindle MK 4 Drilling depth 160 mm Overhang 300 mm Column diameter 110 mm Usable table surface [W x L] 420 x 340 mm Speed indicator, scale Drilling depth indicator, scale Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Motor, three-phase, 400 V, pole-switching, 1.5/3 kW Spindle speeds with gearbox, continuously variable, 100-2000 rpm Machine dimensions (W x D x H) 610 x 850 x 1920 mm Weight 420 kg Delivery: free to your door including packaging. FACTORY WARRANTY: 3 years NOT THE RIGHT MACHINE? Hfodpfx Ajd H Rg Hjhnoi WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!