Used other lathes for sale (224)

Condition: excellent (used), Available: Immediately Nwjdpfxepr Uu Us Abkoh

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge Nwsdpozdpvgsfx Abksh The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Nsdpfjzdknwox Abkswh

Year of construction: 2011, condition: ready for operation (used), Swing diameter over bed/facing slide: 330mm/260mm, max. turning diameter: 200mm, max. turning length: 450mm, travel X/Z: 160mm/450mm, rapid traverse: 30m/min, speed: 5000rpm, tool stations: 12, tool holder: VDI30, max. workpiece weight: 100kg. Machine dimensions X/Y/Z: approx. 3300mm/1750mm/2400mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible. Nwsdpfx Abozdkpheksh

Year of construction: 2011, condition: ready for operation (used), A CNC universal lathe is available. Swing diameter over bed/facing slide: 680mm/465mm, max. turning diameter: 465mm, max. turning length: 1050mm, travel X/Z: 300mm/1050mm, rapid traverse: 20m/min, speed: 3250rpm, tool positions: 12, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3300mm/1950mm/2500mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Nwodpfx Aezdkpbjbkjh

Condition: good (used), Year of construction: 1998, ZMM Sliven - CU 1000 steady rest Nedpfx Aex Ttfajbkewh

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Nwedpfx Asx Tp Dxsbksh Height:1200mm Weight:290kg

Condition: good (used), Year of construction: 1996, incl. Chip conveyor incl. Chip crusher Under power incl. spare rollers Power on hours  23.000 H Working hours ca 8.000 H Rail track gauge: 1435mm Max. wheel tread Ø: 1400mm Min. wheel tread Ø: 520mm Max. axle length wheel set:2450mm Min. axle length wheel set:1620mm Speeds / ranges: 154Rpm Number of slides: 2 Nwedpfow Rc Drox Abkeh Power: 44kW Length: 6000mm Width: 2200mm Height: 2600mm Weight: 33000kg

Year of construction: 1989, condition: used, functionality: fully functional, Model Gemini ESCO D6-SR with decoiler Year of manufacture: 1989 Nedsyip E Tspfx Abkjwh Max. material diameter: approx. 9 mm Max. processing length per stroke: approx. 62 mm Number of rotating tools: 3 (or turret version with 4 positions) Max. tool head speed: up to approx. 7,100 rpm Machine dimensions (machine bed only): approx. 1,000 × 3,400 mm Operating voltage: 380V 50 Hz Control voltage: 110 V 50Hz Rated power: 3.4 kW Rated current: 6 A

Condition: ready for operation (used), A CNC vertical lathe Jungenthal is available. Gear stages: 2, max. speed: 160rpm, max. workpiece height: 800mm, chuck jaws: 6, faceplate diameter: 2000mm, motor power: 50kW, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible. Nodjzcyqgepfx Abkewh

Year of construction: 1992, condition: ready for operation (used), A universal CNC cycle lathe Boehringer is available. Center height: 280mm, swing diameter over bed/cross slide: 570mm/365mm, turning length: 1000mm, distance between centers: 1500mm, quill diameter: 80mm, quill travel: 190mm, spindle speed: 2500rpm, bed width: 360mm, rapid traverse X/Z: 5m/min/10m/min. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2400mm, weight: approx. 4000kg, control system: Siemens. Documentation available. An on-site inspection is possible. Nwedpfxozcyqyo Abkjh

Year of construction: 1963, condition: ready for operation (used), functionality: fully functional, Swing diameter: 600 mm Turning length: 1000 mm Equipment: Njdpoyx Dtlofx Abkswh - Three-jaw chuck Ø 250 mm - Four-jaw chuck Ø 250 mm - Live centre - Quick-change drill chuck MK5 - Documentation

Year of construction: 2007, condition: ready for operation (used), Max. turning diameter: 12mm, max. turning length: 200mm, rated current: 40A, mains voltage: 200V, connected load: 8kVA, weight: 2.1t, with sub spindle, driven tools. An on site inspection is possible. Nwodpfxezcfhks Abksh

Year of construction: 2000, condition: ready for operation (used), Controls: Mitsubishi, weight: 2.2t. Equipment: main spindle with guide bush system, counter spindle, two C axes, several driven tools, front machining and rear side machining, tool block for cross machining, automatic parts catcher, bar feeder connection, tool cabinet with original setting tools, spindle monitoring EWL 4444, high pressure coolant supply, extraction connection. An on site inspection is possible. Njdpfxezcfh Rs Abkewh

Year of construction: 2000, condition: ready for operation (used), Controls: Mitsubishi, weight: 2.53t. Equipment: counter spindle, tool turret with driven tool stations, linear slide with driven tools, bar feeder interface, tool set and setting tools, spindle monitoring EWL 4444. An on site inspection is possible. Nodpfxezcfhqs Abkjwh

Year of construction: 1977, condition: ready for operation (used), Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible. Njdszbuuwspfx Abkswh

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 250 mm, quill diameter: 60 mm, quill travel distance: 140 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, machine/vehicle number: 2818.02, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 230 mm Travel range X-axis: 250 mm Spindle head according to DIN 55027: A6 Spindle bore diameter: 64 mm Spindle diameter in the front bearing: 100 mm Speed range: 1–4,000 rpm Feed range, facing: 0.001–1,000 mm/rev Feed range, longitudinal and thread pitches: 0.001–2,000 mm/rev Rapid traverse, facing: 5 m/min Rapid traverse, longitudinal: 10 m/min Feed force, facing: 5,000 N Feed force, longitudinal: 7,000 N Tailstock Arbor diameter: 60 mm Arbor travel: 140 mm Taper: MK 4 MACHINE DETAILS Njdszb Hf Ujpfx Abkjwh Main spindle drive Power, digital AC motor at 40% duty cycle: 16 kW Power, digital AC motor at 60% duty cycle: 15 kW Power, digital AC motor at 100% duty cycle: 12 kW Gear stages: 2 Standard chuck size 1: 200 mm Standard chuck size 2: 250 mm Three-phase voltage: 400 V Frequency: 50 Hz Operating hours (according to meter): 4,521 h

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Njdpfx Ajza E Sqjbkewh

Condition: used, Year of construction: 1996, operating hours: 22,400 h, functionality: fully functional, machine/vehicle number: 474, -Weiler -E50/1 -No.: 474 -Year of manufacture: 1996 -Operating hours: approx. 22,400 -Voest-Alpine Steinel control system (the control system likely operated via a separate desktop PC) -Includes chip conveyor, various tool holders, and tools Shipping possible upon request. Sale only to commercial businesses. Nodpfx Abjy U Iqgokswh Stated purchase price = net price plus 19% VAT = €9,282.00 gross.

Year of construction: 2012, condition: reconditioned (used), Conventional Precision Lathe WEILER “CONDOR VC” With Siemens 3-axis digital readout Year of manufacture: 2012 Spindle bore: 56 mm Centre distance: 800 mm Swing over bed: 205 mm Speed range: 30 – 3500 rpm Nwsdpfx Abexykz Ajksh Supplied with the following accessories: Multifix tool holder Chip guard with internal lighting Coolant system 3-jaw chuck Ø 200 mm Chuck guard Follow rest Ø approx. 150 mm Tailstock with retractable quill Operating manual

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Nwsdoy U Nqnepfx Abksh

Year of construction: 2003, condition: ready for operation (used), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass and steel), flushing gun, connected load: 33kW, control system: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in the control cabinet, operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder magazine, chip conveyor, coolant unit and basic equipment of static and driven tool holders. An on-site inspection is possible. Nwjdpfxoy U Nq Ij Abkeh

Year of construction: 1988, condition: ready for operation (used), Interface: RS232C, connected load: 21kVA, control system: Okuma OSP 5000 L-G, length: 2900mm, width: 1800mm, height: 1720mm, weight: 4.5t, ball screw of the X-axis has 0.2mm backlash, regularly maintained, with chip conveyor. An on-site inspection is possible. Nodpfx Aey U Nq Uobkewh

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Nodpfx Absy Uyf Nskewh

Condition: ready for operation (used), Offered is a conventional lathe. Center height: 190mm, swing diameter over bed: 380mm, speed range: 27-1000rpm, speed stages: 12, thread types: metric, Whitworth, module, feeds: Norton gearbox, spindle mount: bayonet, operation: manual, control system: manual. Equipped with 3-jaw chuck, chuck guard with safety screen, four-position tool holder, lead and feed screw cover. Weight: approx. 1200kg, overall dimensions X/Y/Z: approx. 2000mm/1000mm/1300mm. Inspection possible by arrangement. Nwsdpfx Aboy Ulncjkjh