Used other food technology for sale (225)

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Lrodpew Dy Hlofx Al Ijn Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: new, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: Approx. 1150L Design: Vertical construction with forklift pockets Execution: Single-walled, min. 1.5mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Central traverse with two hinged lid halves Bottom: Torispherical head with discharge groove Tank dimensions: Tank diameter: 1190mm Cylinder height: 1000mm Total height: 1300mm (plus agitator motor) Features: - Central traverse with two hinged lid halves, stainless steel perforated plates underneath the hinged lid as reach-in protection, bolted, removable - Tank mounted on a stainless steel transport base with forklift openings Lrjdpfx Aew Dy Ngel Isn - DN50 disc valve outlet fitting DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 RPM Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Solid agitator shaft connected to the agitator motor with a sleeve coupling, removable - Agitator shaft balanced for smooth rotation within the speed range - Large-surface stainless steel anchor-style agitator, welded design, weld seams pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, no-voltage release, emergency stop Fully prewired

Year of construction: 2010, condition: excellent (used), Autoclave Brand Spomasz Model WSA 18 Lrsdpswfz Rnefx Al Ijn Serial number: 106 Year of construction: 2010 Voltage 3 x 400 V, 50 Hz, 16 A Dimensions: 5400 mm x 2600 mm x 2300 mm It has a current UDT inspection

Condition: ready for operation (used), LUBECA can closer for square cans. Type - 956. Max dimension of can - 24x24cm. Max height - 33cm. 50Hz. Lrodpfxef U Tk Se Al Isn 3.6amp-

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Ledjyln D Tjpfx Al Iorn

Condition: like new (used), functionality: fully functional, - TIME AND TEMPERATURE CONTROLLER - Drum diameter: 1.80 m Lrjdpfx Aeynknmol Ijn Designed for pulses and vegetables, also suitable for blanching many other fruits. Automatic regulation of the blanching temperature. Internal screw conveyor for blanching fruit. Water recirculation to homogenize the internal temperature.

Condition: used, functionality: fully functional, Precise Defect Identification The Optyx sorting platforms are characterized by exceptional color, shape, size and texture recognition. High resolution Vis/IR, Tri-chromatic, or UV cameras ensure even the subtlest defects are identified and targeted for removal increasing quality. Precise Removal of Defects and Foreign Material The intelligent ejection system features precision pneumatic-based valves with exceptional response time for pinpoint accuracy. Unparalleled yield improvement can be achieved with the optional three-way sorting. Intelligent Sorting Advanced object-based image processing allows FMAlert™ to track foreign material providing you with a digital record. Custom algorithms determine shape, length, width, curvature, symmetry, circularity and other special characteristics improving quality. Using cameras, Optyx recognizes the size and shape of each object, as well as millions of subtle color differences. As the product passes through the sorter, it inspects it from above while on the conveyor belt. The product is then moved to the end of the Optyx conveyor for an overhead view from below. Using proprietary image processing technology designed specifically for dates, the sorter quickly analyzes the images, comparing each item to previously defined standards as accepted or rejected. When the sorter identifies objects to separate from the main product section, it activates the ejector system, comprised of a series of air valves that reach the full width of the system. As the air is expelled, the valves identify each object to be separated and removed from the main product section. Features & Benefits • Multiple camera configurations to match product requirements • High Resolution Vis/IR, UV or Tri-chromatic camera options • HID, UV, & LED lighting options • Simple, user-friendly operation, cleaning and maintenance • Easy adjustment for product change over • Wet or dry products. Typical Applications Potatoes (chips, whole, strips, sliced, diced, wedges), fruits, nuts, vegetables, cereal, confectionery, dry beans, fresh-cut (including core removal), raisins, snack foods, wet or dry products. Sorting Excellence Green bean processors use an Optyx 3000 to re-sort the defect streams of other sorters to increase yields. Output. 6 TN metric/H = 13,000 lbs/h = 5,896 kg/h. Production may vary depending on the product. Work measures: Long tape: 2.20 m. Tape width: 0.66 m Lrsdjwnxupjpfx Al Isn Download: 1.22 m.

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Lrsdox S Ipwspfx Al Ien Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: like new (used), functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Rotary autoclaves: These are used to sterilize products that present greater difficulties in heat transmission. Examples include vegetables in grains, grated or diced, and beverages such as milkshakes, teas, coffees, or evaporated milk. In this type, the basket rotates inside the autoclave, stirring the contents and preventing the pieces closest to the sides of the vessel from roasting. Lodpfox Tilijx Al Isrn Distance between rollers:

Condition: like new (used), Rotary autoclave SURDRY 1 B Lrjdpfsxp Rqvex Al Ijn

Condition: like new (used), functionality: fully functional, Features: - Automatic can feeding with synchronised auger. - Lid feeding from both sides (right and left). Lrjdpfx Ajyrfbvsl Ien - Rotary clinching system using guides and inverted ramp with smooth approach, allowing for 10-20 mm overfills. - Upper transmission unit in oil bath supported by production and consistency in closure quality. - Closure technology with progressive closure system and stainless steel head. - Stainless steel protection and safety guards. - Maximum production: 100 cans/min. - Production with the current format (127 mm) carried by the machine is approximately 80 cans/minute. Technical data: Max. diameter 160 mm Min-max height 20-175 mm Rotary clincher with guides * Production may vary depending on the format and product to be sealed.

Condition: excellent (used), A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Ledswny Nzspfx Al Ijrn Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom. Therefore, we are not only talking about mixing particles, but about a more complex process that can integrate emulsification, homogenization, solubilization, suspension, dispersion and disintegration of solid particles. To carry out this particle size reduction, the product is pumped under pressure by means of valves and pistons in monobloc compression blocks. These valves allow us to define the desired flow rate and pressure.

Condition: like new (used), It is suitable for direct filling of whole solid products of medium and large dimensions in cans, jars, plastic containers, etc. Products: peach halves, pear halves, whole peeled tomatoes, olives, cucumbers, carrots, apricots, artichoke hearts. - Production capacity will depend on the format and the product to be filled. Lsdpjxp Rqpefx Al Ijrn

Condition: like new (used), functionality: fully functional, Jar closing machine for glass, PET, etc. formats, for TWIST-OFF type closing system. The EMERITO 1.8 closing machine is designed to close TWIST caps on glass jars with cap diameters from Ø30 mm to Ø82 mm. Featuring an exclusive design, it stands out for its user-friendliness and simple format changeover without the need for additional tools. Ljdpfxeycgn Sj Al Iorn In addition to the closing mechanism, it is equipped with an automatic cap feeder. Optionally, it can be complemented with a steam injection system to achieve vacuum sealing.

Condition: like new (used), Triblock rinser/filler for sparkling wine with gas and corker for cork stoppers. Lrsdpfx Alex S Ix So Ien Output varies according to product, format, and filling capacity. Production up to: 8,000 bottles/h (130 bottles/min).

Condition: excellent (used), Program-controlled pasteurizer for fruit juices and cremogenates with indirect heating and a regenerative heat exchanger circuit, including a CIP connection. Features: Ljdpfswnzcpjx Al Iorn *Production: 30,000 l/h depending on the product. *Number of tubes: 94. *Includes Simens Simatic control panel. *Max. viscosity: 25 cp/10°C *Max. pulp percentage: 89% *Max. fiber length: 6-8 mm.

Condition: like new (used), The production will vary depending on the product. Lredpfxoyn Hcao Al Ien

Condition: like new (used), functionality: fully functional, Stainless Steel Roller Washer + Roller Sorting Lrodpfx Aleynkknj Ien

Condition: used, functionality: fully functional, Zilli & Bellini telescopic fillers are suitable for handling a wide range of products, from free-flowing granular products to whole peeled tomatoes. Suitable for round and non-round containers made of metal, glass, plastic. Specially designed to compact dense and difficult to fill products inside the container after piston filling. PRODUCTS: peeled tomatoes (whole, sliced and diced) olives (whole and sliced) mushrooms (whole and sliced) PET FOOD pulses: peas, chickpeas, lentils, beans and broad beans vegetables (whole, sliced and diced): carrots, potatoes, onions, corn kernels, green beans, etc. fruits (whole, sliced and diced): cherries, strawberries, plums, currants, apricots, pears, peaches, etc. ravioli, pasta, cereals and rice. cockles and mussels. Lrjdswnd Emjpfx Al Ien * Production may vary depending on the format and product to be filled.

Condition: like new (used), The system consists of, after feeding the multihead weigher, the product passes through the feeder, which transfers it to the center of the rotating cone. The cone then conditions the product by rotating it evenly across the dosing paths. An adjustable vibration transfers a random quantity, preferably between 20% and 30% of the desired nominal weight, to the pre-dosing containers, from where it is transferred as needed to the weighing containers. Min weight: 50 gr. Max weight: 5000 gr. INCLUDES: 4 types of funnels according to the required format and the electric panel. PRODUCTS: products with very different characteristics (granular, powder, or chunks) Lrsdpfxjyn Htxj Al Isn 14 WEIGHING HEADS.

Year of construction: 2009, condition: ready for operation (used), An X-ray sorting machine for jars in the food industry is available. Sorting width: 500mm, machine dimensions X/Y/Z: approx. 2300mm/1900mm/2200mm, weight: approx. 600kg. Documentation available. On-site inspection is possible. Lredpov I U Igofx Al Ien

Condition: ready for operation (used), A VSB Verbufa for the positioning of minced meat, hamburgers, cookies, balls and sticks with high cycle output in packaging and packaging machines is available. Output: 110 portions/min, machine dimensions X/Y/Z: approx. 1700mm/950mm/1650mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Ledpfev Ifwlsx Al Isrn

Year of construction: 2017, condition: ready for operation (used), A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible. Lodpfxex S Rb No Al Isrn

Condition: used, functionality: fully functional, Used in good condition Lrodpfswa Stijx Al Ion Capacity 20,000 kg per hour

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Novapac cup filling and sealing machine, type: RM 150, machine number: 25 178, year of construction: 2005, 400 V, 50 Hz, denester: 85 mm x 85 mm, dyes: (2x) 72 mm x 72 mm, plastic belt, belt width: (2x) 100 mm, total dimensions: 2400 mm x 2350 mm x 2370 mm. S/s switch cabinet, dimensions: 1000 mm x 400 mm x 2150 mm, s/s control panel, dimensions: 800 mm x 350 mm x 800 mm. Lrsdexl Tx Uopfx Al Ion