Used Insulation for sale (3,613)

Condition: used, Year of construction: 1983, tank capacity: 480 l, overall weight: 800 kg, manhole diameter: 260 mm, temperature: 200 °C, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Reactor Capacity: 480 l Vessel dimensions: Ø 800 x 900 mm Design: Klöpper bottom, Klöpper lid Manhole: Ø 260 mm Top connections: Ø 250 mm + Ø 40 mm + Ø 25 mm Double jacket capacity: 50 l Material: Stainless steel 1.4435 (316L) Surface: highly polished MACHINE DETAILS Operating pressure vessel: 2 bar Operating pressure double jacket: 6 bar Temperature: max. 200 °C Drive Motor power: 1.0 kW Voltage: 220/380 V Shaft speed: approx. 113–1,130 rpm Dimensions and weight Footprint: 1.1 x 1.0 m Overall height: 2.3 m Weight: 800 kg Gedpfx Aco Ai Rbrsmokd EQUIPMENT Insulated tank Double jacket Vacuum operation of the vessel possible Vacuum operation of the double jacket possible Viscojet propeller agitator Infinitely variable drive Switch Mounted on feet Note: Without bottom outlet (emptying via suction pipe)

Year of construction: 1993, condition: used, empty load weight: 1,800 kg, manhole diameter: 200 mm, tank capacity: 1,600 l, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Capacity: 1,600 l Tank dimensions: Ø 1,200 x 1,296 mm Design: Conical bottom, conical top Manhole/handhole: Ø 200 mm Top connections: 2x Ø 40 mm + Ø 50 mm Outlet: Ø 40 mm Material: Stainless steel 1.4435 (316L) Surface: internally polished MACHINE DETAILS Operating pressure tank: 3.2 bar Operating pressure double jacket: 6 bar Temperature range: -10 to +160 °C Gedpfx Acj Ai Nv Aemjkd Drive Motor power: 2.5 kW Voltage: 400 V Motor speed: 1,450 rpm Shaft speed: variable, approx. 19–150 rpm Dimensions and weight Footprint: 1.9 x 1.4 m Overall height: 3.8 m Weight: 1,800 kg EQUIPMENT Insulated tank Double jacket Vacuum operation of the tank possible Vacuum operation of the double jacket possible Paddle stirrer Control cabinet (as is) Mounted on legs

Year of construction: 1989, condition: used, overall weight: 500 kg, rotational speed (max.): 1,400 rpm, machine/vehicle number: 316484, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Material: Structural steel Gedpfxe Ai Erbs Acmekd Performance data Flow rate: 60 m³/h Pressure build-up: 0.3 bar Inlet: ø 150 mm Outlet: ø 200 mm MACHINE DETAILS Drive Motor power: 3 kW Voltage: 380 V Motor speed: 1,400 rpm Dimensions and weight Space requirement: 0.8 x 1.2 m Overall height: 0.8 m Weight: 500 kg EQUIPMENT Sound-insulating cabinet Air filter Silencer

Condition: excellent (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, total length: 40,000 mm, total width: 4,000 mm, total height: 4,500 mm, working height: 2,500 mm, input voltage: 400 V, overall weight: 48,000 kg, type of input current: three-phase, Equipment: documentation/manual, Complete line for the production of single and double-pane insulated glass units, including: Automatic bending machine for frames FB-H PC system Automatic spacer filling machine DF-R-V Automatic insulated glass production line IGL-G-H2 (with automatic argon filling at a minimum level of 90%) Automatic sealing robot (two components) ASR-H2.5 Butyl applicator BE-A Rotating table RT-A Frame transporter Technical data: 1) Power supply: AC380V, 50Hz, approximately 45KW 2) Air pressure: 0.6~0.7MPa 3) Dimensions: 33250(L)×3000(W)×3000(H)mm 4) Max. load: insulated glass unit approximately 850kg, suction side approximately 400kg 5) Min. glass size: 450×350mm 6) Max. glass size: 5000×2500mm 7) Insulated glass unit thickness: 14~70mm 8) Working height: 530±30mm 9) Transporter speed: 35m/min 10) Inclination angle: 6°~8° 11) Glass thickness: 4-15mm 12) Bristle diameter: 0.12mm 13) Max. washing speed: 0-10m/min adjustable 14) Average expected output: 1 m2 (1000x1000mm) of rectangular insulated glass units with the configuration (6mm+9A+6mm), for example, approximately 550 units per 8 hours with automatic gas filling, approximately 650 units per 8 hours without gas, for single-pane units (depending on the current factory situation and employee efficiency). Gsdpfxjz Ihhto Acmokd

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, overall weight: 2,200 kg, type of input current: AC, Equipment: documentation/manual, We are offering this used LISEC LBH-25AR insulating glass manufacturing machine, manufactured in 2014, for sale. Serial/drawing number: 572-074946 Weight: 2,200 kg Rated current (full load): 10.0 A Apparent power: 7.00 kVA Voltage: 400 V Frequency: 50 Hz Short-circuit strength: 10 kA Pressure: 6.00 bar Degree of protection: IP32 Maximum current: 1.4 A AC/DC voltage: 400 / 24 V If you have any questions or require further information, please feel free to send us a message or call us. Gksdpfozmn Iyox Acmjd

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, - washing machine - assembly station - panel press without gas filling, in good condition (size 2100 x 2500 mm) - knockdown table - year: 2006 - line length: 16.5 m Gjdo Ah Rc Njpfx Acmskd - direction: right-left The ISO line is in good condition and is fully operational.

Year of construction: 1993, condition: used, functionality: fully functional, We offer this used ALMORE Mini calo cutting line for thermal insulation, built in 1993, with a double unwinding unit from Jouanel, in very good working condition. Gsdpfxjz Dtmaj Acmskd These machines are specialized in sheet metal processing and are particularly suitable for thermal insulation, industrial thermal insulation, and ventilation workshops. Functions include: length cutting, deburring, punching, and profiling. Machine weight: 2 tons. If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical insulating glass production line for max. glass sizes : 3500 x 2500 mm working size : from right to left min. glas size : 380 x 150 mm glass thikness : 2,3 - 17 mm IG element thikness : 12-60 mm Gksdpj Ahyaaofx Acmed - vertical glasswashing machine with 6 brushes - frame setting station - gasfilling press - tilting station - vertical sealing robot - butylextruder LBH 25 V - desiccant filling machine A1RL max. frame : 2500 x 1200 mm , min. 150 x 150 mm , for alu spacer 6-24 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total width: 2,500 mm, total height: 3,500 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, feed length Y-axis: 3,500 mm, overall weight: 3,550 kg, type of input current: three-phase, power: 17.06 kW (23.20 HP), Equipment: documentation/manual, Used Lisec VL-1N/25 insulating glass manufacturing machine for sale, year of manufacture: 2009. Type: VL-1N/25 Gkjdpfxjz Nkh To Acmed Serial number: 361-053012 Weight: 3,550 kg Total load current: 24.60 A Apparent power: 17.06 kVA Voltage: 3/N/PE-50Hz 400 V Pressure: 6.00 bar Maximum material load: 250 kg/m Auxiliary current: 8.0 A AC/DC voltage: 400 / 24 V LISEC VL-1N/25 automatic thermal insulating glass sealing robot – 2500 x 3500 mm. Automatic edge sealing machine designed for applying secondary sealant to thermal insulating glass units. The machine consists of an infeed and an outfeed section, as well as a discharge station. A separate measuring unit located in front of the machine measures the thickness of the glass panes, the air gap between them, and the total thickness of the thermal insulating glass unit. The top edge of the thermal insulating glass unit is guided by a horizontal roller beam. This allows the glass units to pass at a defined distance in front of the back panel in the sealing sections. They are transported using a patented, wear-resistant conveyor chain, which supports the lower edge of the unit only minimally, leaving the sealing groove free for the application of the sealant. A linear-guided vacuum suction system integrated into the back panel ensures that the thermal insulating glass units are transported without slipping. The machine can also process polyurethane in 200-liter containers of component "A" + 20-liter containers of component "B", as well as silicone in 200-liter containers of component "A" + 20-liter containers of component "B". The machine can be viewed in operation and will be dismantled in mid-January. If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, total length: 35,000 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bystronic IG production line for glass units Maximum size: L4200 x H2700 Minimum size: 180 x 350 mm (double, triple, and shaped glass) An automatic butyl extruder can be offered as an option. Gedpfezxx Etex Acmokd Contact us at 0032479588591 to arrange a visit.

Year of construction: 2022, operating hours: 39 h, condition: like new (used), functionality: fully functional, machine/vehicle number: IPRTTJ22Z144, ISOblow Prof Twin Turbo – Mobile unit including complete hose set, lance set, and woven sack for blowing in - 2 turbines generate a very high air flow rate - Also ideal for wood fiber insulation materials - Electronically controlled material slide - Easy filling via large filling flap - High capacity of the hopper - Material hopper with 4 loosening shafts Gksdpfsz R Ut Rex Acmed - Very good loosening, even with tightly compressed bales - Ideal for large construction sites and use in prefabrication - 1 x 400 V 16 A connection is sufficient

Condition: new, Year of construction: 2023, functionality: fully functional, input voltage: 24 V, type of input current: DC, Equipment: documentation/manual, Sigmatek Central Processing Unit DCP646, new part originally packed Gjdpfx Ajzhg Ibecmokd 100MHz, 2MB memory HW: 5.6 X1.1 SW: 97030C-72

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 116/2024, working height: 2,500 mm, input voltage: 400 V, load capacity: 300 kg, type of input current: three-phase, power: 150 kW (203.94 HP), Equipment: CE marking, documentation/manual, Automatic robot for coating regular and irregular shapes of double- and triple-pane insulated glass. This model of automatic coating robot is economical, practical, and suitable for medium-sized and large glass factories. Gkodpfx Acsz R Skaemod It is designed for all glass manufacturers who want to automate the coating process of insulated glass, thereby reducing workload, saving on labor costs, and improving production efficiency. It ensures a significant reduction in production time due to greater coating precision, thereby eliminating wasted time and materials. The robot is entirely manufactured by BATTELLINO in Italy.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-232.0495, total length: 12,000 mm, input voltage: 400 V, feed length X-axis: 2,300 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, Automatic butyl extruder in excellent condition, technically refurbished by Glaston in 2025. Upgrades to the operating panel and replaced parts are listed; please contact us for more information. Maximum size: 2300x2500mm Gkjdpfx Ajzw Erwecmod Minimum size: 250x250mm, but not suitable for Georgian bars.

Condition: used, Used stainless steel tank with insulation Item number: 10904 Godpfjzxd U Tex Acmekd Last use: CIP Volume: 3800 liters Type: Standing on 4 legs Material (in contact with medium): 1.4571 / AISI316 Manhole cover: Ø 500 mm Max. operating pressure: ATM Design: with insulation Tank dimensions: Inner diameter: 1600 mm Outer diameter: 1800 mm Cylindrical height: 1870 mm Overall width: 1950 mm Overall height: 3060 mm Materials: Inside: 1.4571 / AISI316 Outer parts: 1.4301 / AISI 304 Features: Outlet diameter: 65 mm Outlet valve: butterfly valve Height of legs: 375 mm Nameplate: no

Condition: used, GBS Prüfpuls rev3 Pulse generator for long-term insulation tests The Prüfpuls unit is designed for long-term insulation tests on test specimens with a capacity of up to 6 nF. Converter for high-voltage test transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation 16-24 kHz of the sine wave via a full bridge. · Converter voltage adjustable from 0-600 V, Imax = 2.6 A, maximum power 1.3 kW · Pulse current limitation 110 A (shutdown threshold) Pulse transformer – drive · Drive via a full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limitation 100 A (shutdown threshold). · Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductances 150 μH, 300 μH, to adjust the pulse width or rise times to the load capacity and voltage. · Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-stage cascaded circuit. · Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. · Maximum output voltage 15 kV with possible load capacities of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · Voltage divider 1:1000 in parallel. · Overvoltage protection at approx. 20-23 kV by parallel spark gaps · Thermistor for over-temperature detection in the 1st transformer stage. · Earth-side current measurement socket 100 mV/A. Breakdown detection, testing · If the maximum bridge currents for the transformer drive or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hour counter to determine the test time. Gedpfx Asu Egz Recmokd Manufacturer's price approx. €59,500 More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, We are offering these used DME 40HL 40HL insulated fermentation tanks, manufactured in 2021. Manufacturer: DME Model: 40HL Date of manufacture: 06/23/2021 Gjdpoza Twnjfx Acmskd Serial number: B5715-30-03 Year of manufacture: 2021 Condition: used Type: 40HL insulated fermentation tanks If you have any questions or would like more information, please feel free to send us a message or call us. Price per unit.

Condition: used, Used stainless steel tank with insulation Article number: 10906 Last use: CIP Gedpfjzxfbbjx Acmekd Volume: 3500 liters Type: Standing on 3 legs Material (in contact with media): 1.4301 / AISI 304 Manhole cover: Ø 500mm Max. operating pressure: ATM Design: with insulation Tank dimensions: Inner diameter: 1720mm Outer diameter: 1900mm Cylindrical height: 1440mm Overall width: 2000mm Overall height: 2770mm Materials: Inside: 1.4301 / AISI 304 Outer parts: 1.4301 / AISI 304 Features: Outlet diameter: 50mm Height of legs: 600mm Nameplate: yes

Condition: used, functionality: unexamined, total width: 120 mm, total length: 120 mm, total height: 120 mm, overall weight: 1 kg, Bender ISOMETER iso685-D-B Insulation Monitoring Device – B91067020 Insulation monitoring device for continuous monitoring of the insulation resistance in unearthed AC, DC, and AC/DC power supply systems. Manufacturer: Bender Product Series: ISOMETER Type: iso685-D-B Article Number: B91067020 Device Type: Insulation Monitoring Device Monitored Network System: IT systems (unearthed networks) Network Rated Voltage AC: 0–690 V Network Rated Voltage DC: 0–1000 V Network Rated Frequency: 1–460 Hz Supply Voltage AC: 24–240 V Supply Frequency: 50–400 Hz Supply Voltage DC: 24–240 V Measured Values: Insulation resistance, network voltage, network leakage capacitance, and frequency Measurement Method: Active AMPPlus measurement method Measurement Profiles: Predefined measurement profiles for different network conditions Display: Integrated high-resolution graphical LC display Operation: Integrated control elements Communication Interfaces: Ethernet and RS-485 Communication Protocols: Modbus TCP, Modbus RTU, BCOM, Bender Sensor Bus Web Server: Integrated History Memory: Available ISOnet Function: Available, for monitoring coupled IT systems Alarm: When set insulation limit values are undercut Remote Monitoring: Possible via network interface Extension of Voltage Range: Possible via external coupling devices Standard for Insulation Monitoring: IEC 61557-8 Gedpo Aia Dnefx Acmekd Application Areas: Industrial power supplies, converter systems, UPS systems, battery networks, and coupled IT systems.

Condition: used, Used stainless steel tank with insulation Article number Last application: CIP Volume: 5250 liters Type: Standing on 3 legs Material (in contact with media): 1.4301 / AISI 304 Dome lid: Ø 460mm Max. operating pressure: ATM Design: with insulation Tank dimensions: Gedpfxozxd Ime Acmskd Inner diameter: 1800mm Outer diameter: 1840mm Cylindrical height: 2400mm Overall width: 1950mm Overall height: 2990mm Materials: Inside: 1.4301 / AISI 304 External parts: 1.4301 / AISI 304 Equipment: Outlet diameter: 65mm Outlet valve: Butterfly valve Height of legs: 640mm Nameplate: no Spray head

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Water management Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Gedpo Ah Hgzjfx Acmokd Drying and energy saving The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. This equipment is being sold Ex-Works, with the buyer responsible for packing & shipping. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2014, total length: 9,100 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 385/65R22.5, color: grey, Equipment: ABS, = Additional Options and Accessories = - Alloy wheels Gkodpfx Acjzv D N Somjd - Air suspension - Disc brakes - Toolbox = Notes = KEMPF SKM 35/3 Tipper truck Insulated 2014 BPW axles (1) Lift axle Alcoas Toolbox German trailer Chassis number: WKY3S0035EM0250 EXPORT SERVICES ————— • Austrian transit registration/license plate with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with trailer The prices for export services are exclusive of the offer price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. = Further Information = General information Year of construction: 2014 Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 00 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 2: Alloy wheels; Max. axle load: 00 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 3: Alloy wheels; Max. axle load: 00 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Weights Unladen weight: 5,260 kg Payload: 29,740 kg GVW: 35,000 kg Functional Tipper: Rear Condition Technical condition: very good Optical condition: very good Further information Please contact Olivier Geerts or Edwin Geerts for further information. = Company Information = EXPORT SERVICES ————— • Transit registration and license plate with insurance • EX-A customs documents for export outside the European Union • Transport to all ports in the Netherlands and Belgium • Organization of truck transport with low-loader trailers The prices for export services are exclusive of the offer price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. GEERTS Trucks & Trailers / GEERTS Nederland B.V. Spoorlaan Noord 17 5121 WV Rijen The Netherlands

Condition: used, Year of construction: 2015, Forel High Speed Hot -Melt IGU Line, comprising: Forel VW 2000 6 brush glass washer. Serial no: P15080 (2015) 2000 x 3500 (max) Forel / Soft Solution scanner. Serial no: LSC20150291 (from cabinet) Forel SQD 202. Serial no: P15081 (2015) 2 - Forel TSS 20D automatic spacer applicators. Serial no: P15082 (2015) Serial no: P15083 (2015) with guarding Forel Georgian assembly rack with Sick guard 2 - Forel CT 2000 corner tape applicators. Serial no: P15084 (2015). Serial no: P15085 (2015) Forel AFG 20D gas press / coupling press. Serial no: P15086 (2015) Forel SAHM 20D automatic heat sealing hot melt robot. Serial no: P15087 (2015) Gsdps Afwtgefx Acmokd Location: This lot is located in Wellingborough, Northamptonshire, UK

Year of construction: 2025, condition: excellent (used), functionality: fully functional, Insulation Tester Fluke 1555, 10KV Godpfjxr A Rtox Acmskd Digital insulation measurement up to 10 kV, ideal for testing a wide range of high-voltage installations.

Year of construction: 2018, condition: used, High-quality insulated box body, removed from a truck (Mercedes Antos 2640). Suitable for reuse as a refrigerated body, mobile storage unit, workshop, or for conversion projects. Thanks to the high-quality insulation, the body is suitable for numerous professional applications. Technical data: Manufacturer: Wüllhorst Year of manufacture: 2018 Cargo space: Length: 7.6 meters Width: 2.48 meters Height: 2.20 meters About Cevoman: ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected in our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experience in worldwide export ✔ Personal service and professional advice Weight: 3500 kg = Further information = General information Year of manufacture: 2018 New: No Gedpfezp Hrvox Acmokd Year of construction: 2018 Model year: 2018 Color: Silver Type number: / Thermobox – Ideal for conversion Technical information Part suitable for: - Mercedes Antos - MAN TGS Unladen weight: 3,500 kg Condition Overall condition: very good Technical condition: very good Optical condition: very good Damage: none Further information Please contact Joeri Celen or August Celen for more information.