Used Multi spindle machines for sale (214)

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Gedpjin Ub Tsfx Aacsuh Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, total width: 2,500 mm, total length: 4,500 mm, total height: 3,200 mm, Offered is a double spindle pick up turning machine VSC 250 DUO. There are 2 nearly identical machines available. Each machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The VSC 250 DUO will receive a general overhaul before delivery and gets a control upgrade to Siemens Sinumerik ONE. The machine can be equipped with other periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens Sinumerik One TECHNICAL DATA workpiece diameter: max. 250 mm workpiece height: max. 150 mm chuck diameter: 250/315 mm swing diameter: 350 mm Gusdper Nc Ufsfx Aacsh X-stroke: 745 mm Z-stroke: 300 mm TOOL CARRIER working area 1 1x EMAG disc turrets, 12x VDI 50 without driven tools working area 2 1x EMAG disc turret, 12x VDI 50 with driven tools Price, delivery time and equipment of the machine on request.

Year of construction: 2002, condition: good (used), functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Godpfx Aon Uum Hjacjuh Bar feeder for 1500mm long bars

Condition: good (used), Year of construction: 2007, Pictures and description coming soon Gusdpfov S Hmpox Aaceh

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, number of spindles: 2, controller manufacturer: Siemens, controller model: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindles! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool Carrier 1: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC1 XYB Tool Carrier 2: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and electrical cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available Coolant pump 8 bar: on cleaning system Medium-high pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min High-pressure pump oil: 33 l/min, max. 80 bar Fine filtration of coolant: Compact belt filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-axis machine configuration: available Control: Siemens 840D Solution-Line Gujdpswylz Tjfx Aacsh EQUIPMENT Tool changer Electronic shaft for spindles and drive systems Main spindle expansion stages Stop device including coolant supply through main spindle with solenoid valve Counter spindle expansion stages Stop device including coolant supply through counter spindle with solenoid valve Accuracy package Portal loading system Finished part conveyor Hinged belt conveyor, 1,250 mm with lift pump Chip discharge on the right Coolant supply and fine filtration Bar feeder INDEX LMS 3,200 SBL Expansion direction for SBL Various tool holders (fixed and driven) Various sleeves for the bar feeding magazine

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Godpfxjv Raato Aaceuh Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Year of construction: 2018, operating hours: 7,879 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 8110000014B, A rebuild of the machine took place in 2021: - Change of bar feeder from Chucci to Iemca Next 25-33 - Change of control from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) - Addition of valve block for hydraulic control of cooling lubricant supply (equipped with 28 controllable valves for high pressure) - an electronic parts shuttle for unloading the workpieces was installed - converted to a tool breakage monitoring system Artis / CTM program TECHNICAL DETAILS bar capacity: 36 mm number of main spindles: 6 number of cross slides X-Y axes: 6 C axes: 6 angular resolution: 0,002 ° Rotational speed: 7500 rpm rapid traverse: 40 m/min spindle positioning: 0,1° Drive unit tool speed: max. 13800 rpm MACHINE DETAILS working area: 21,9 sqm (with loader) net weight machine: 15 t chip conveyor: included LUBRICANT DETAILS oil tank volume: 1.800 l total oil volume: 2.000 l 6,3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 bar length: max. 3300 mm bar length: min. 2400 mm Loading capacity as area loader: 450 mm bar diameter: 4 - 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings) Guedpfxjmduh Ej Aaceh

Condition: like new (used), Year of construction: 2021, Offered is a double spindle pick up turning machine VSC 500 DUO. The machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. Gusdpjt Du Tdjfx Aacjh The machine can be equipped with various periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens 840 Dsl TECHNICAL DATA workpiece diameter: max. 440 mm workpiece height: max. 250 mm chuck diameter: 450 mm swing diameter: 550 mm X-stroke: 925 mm Z-stroke: 400 mm TOOL CARRIER 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time and equipment of the machine on request.

Condition: used, High Precision Gsdpfxeq Ec Hgs Aacouh max outer clamping diameter : 80 [mm] - max inner clamping diameter : 90 [mm] - max collet W20 diameter : 20 [mm] - number of spindles : 2 - cross slide stroke (2) X x Z : 40 x 34 [mm] - tool type : square 10 [mm] - rotation speed : 25 - 4 000 [rpm] - spindle height : 1120 [mm] - dimensions : 1830 x 1320 x 1400 [mm] - weight : 1 750 [kg]

Condition: good (used), Tornos SAS 16 6.6 Multi-Spindle Automatic Lathe Condition: Very Good Machine Name: Automatic Lathe with Sliding Headstock Manufacturer: Tornos Model: SAS 16 6.6 Condition: Good (Used) 2 Tornos SAS 16 6.6 Automatic Lathes Gedpfx Ajwh Snveacouh 1 of which has an NC slide

Condition: good (used), Year of construction: 1987, operating hours: 800 h, functionality: unexamined, 1pc. Cam-controlled multi-spindle automatic lathe Schütte AF51 Series 09-06 Year 1987 8-spindles ø max. 51mm. 1pc. IEMCA PRA bundle loader (interface available) 33 different cam sets included (see accessories list for details) 1 pc. Balluff Mini Controller BMC 1 pc. Chip conveyor 10 different change gear sets (see accessories list for details) 8 ø28mm round collets (see accessories list for details) Gusdeu Edp Sspfx Aacjh Paint finish light blue & light gray

Condition: excellent (used), Year of construction: 1990, 1 x multi-spindle automatic lathe Index MS 25 Year of manufacture: 1990 with loading magazine Iemca PRA 40/33 P Guedou Hgduepfx Aacjh Lots of accessories. The machine can be viewed under power.

Condition: ready for operation (used), Year of construction: 1994, We offer a Kummer K90D, which is ideal for production operations. The machine is equipped with a loading and unloading gantry and a corresponding sorting tray. Guedjv Rpw Iepfx Aaceh

Condition: new, Backworking applied for MS52 pos. 6.4 / 6.5 Godep S Sabspfx Aacjuh

Condition: new, Index Traub MS32 hydraulic pump PLP20.14D0-82E2-LEB/EA-N-EL-FS Casappa Gsdewcq Tyjpfx Aacouh Storage traces

Condition: ready for operation (used), Year of construction: 2000, operating hours: 61,000 h, machine/vehicle number: 04800000401, Sales only within EU Guodpfshv H Hyox Aacoh Please give us your quote for the machine ----- Without packaging; Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 12-9, number of spindles: 6, spindle bore: 67 mm, year of last overhaul: 2024, Fully overhauled on 2024, DNT, perfect quality, perfect accuracy Godpfjtw R Huex Aaceuh

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Pietro Cucchi automatic loader Recovery spindle Gsdowrz Hcspfx Aacjuh Threading device Spindle lock Transverse machining unit

Condition: used, GILDEMEISTER GM35 AC MULTISPINDLE LATHE WITH PIETRO CUCCHI LOADER Guodpfx Aaewrpb Iecjh We can offer a lathe and loader overhauled as new with CE certificate

Condition: like new (used), Year of construction: 1999, MULTISPINDLE LATHE SCHÜTTE SF 32S DNT with KUKA ROBOT Used, in excellent condition and fully functional Available for any test at H.B.R. srl Condition: excellent (used) Year of production: 1996 Functionality: fully functional Number of spindles: 6 Spindle speed (max.): 3,150 rpm Bar passage: 32 mm TECHNICAL DETAILS Dqqqnl Number of spindles: 6 Spindle speed: 450 - 3150 rpm Capacity round bar: 32 mm Capacity square bar: 22 mm Capacity hexagon bar: 27 mm Max. advance of bar: 125 mm Max. stroke of long slide: 100 mm Number of possible pieces: 35 Machining rate: from 1.12 sec up to 125 sec Spindle speeds: Number (steps): 49 from 200 rpm up to 3150 rpm Gedpfx Ajvri Atjaceuh Machining time: from 0.63 sec up to 200 sec Voltage: 50 Hz 3x 380 Volt Power: 18.5 kW MACHINE WEIGHT AND DIMENSIONS: Weight: about 8,000 kg Length: 3850 mm Width: 1390 mm Height: 2200 mm High pressure system Knoll AE 1114: Year of construction: 2004 Filter system 5 bar and 40 bar pumps individually adjustable for the processing phases Plate heat exchanger Lifting pump from the chip conveyor Visible for any type of test c/o H.B.R. srl - Calolziocorte (LC)

Condition: new, Year of construction: 2025, Gildemeister 20 completely rebuilt to new condition -AC motor for production time control -AC motor for threading -GM-type soundproof casters -frequency converter for spindle speed programming -bar passage 20mm ,25mm , 28mm with integral loader Gusdpfxefzk S De Aacjh -Optional : X and Z axis NC cross slides, NC pickup with NC pickup slide -EC brand

Condition: ready for operation (used), Year of construction: 1993, Pick-up Polygonal device Threading box Chip conveyor Tube bundle and stand Gujdpjwd R Rbefx Aacoh Miscellaneous accessories

Condition: excellent (used), Year of construction: 1997, - Iemca SIR automatic loader model 25 P year 1998 - Chip conveyor - Threading device - Pick-up - Tool holder - Cams Gujdev Ea Nqjpfx Aacsh

Condition: ready for operation (used), Lathe rebuilt in 2008 - Pietro Cucchi automatic loader serial number 156B08 Gsdpev Rblwjfx Aacjuh - chip conveyor - pick-up, threading device, recesser, tool holder, cams and collets in the machine

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, - Machine rebuilt in 2006 with AC motors for revolutions and advances - Pietro Cucchi integral automatic loader - Pick-up with AC movement with motor - Threading device Gjdpfxov Eblts Aacouh - Chip conveyor - Tool holder - Cams - Set of new bearings for spindles (to be mounted)