Used Tornos for sale (121)

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 10,500 W, spindle speed (max.): 10,000 rpm, overall weight: 2,400 kg, total width: 1,300 mm, total height: 1,720 mm, bar diameter (max.): 25 mm, controller manufacturer: FANUC, controller model: Series 0i-TF Plus, product length (max.): 2,166 mm, number of axes: 5, This 5-axis TORNOS Swiss DT 26 S was manufactured in 2022. It features a maximum bar capacity of 25.4 mm and a main spindle speed of 10,000 rpm. The machine includes a total tool capacity of up to 22 tools and live tool positions of up to 8. If you are looking to get high-quality turning capabilities, consider the TORNOS Swiss DT 26 S swiss type turning machine we have for sale. Contact us for further details. • Max bar capacity: 25.4 mm (up to 26 mm depending on collets) • Main spindle (Z1): 10,000 rpm; 8.2 kW nominal / 10.5 kW peak; 26 Nm; liquid-cooled • Counter-spindle (X4/Z4): 10,000 rpm; 1.5 kW nominal / 2.2 kW peak • Linear axes: 5 (X1, Y1, Z1, X4, Z4) • C-axes: 2 (C1 on main spindle, C4 on counter-spindle) • Operation mode: With or without guide bush (direct drive guide bush) • Total tool capacity: up to 22 tools • Live (driven) tool positions: up to 8 • Electrical connection: 400 V, 3-phase, 50/60 Hz • Installed power: 24 kVA • Nominal current: 35 A • Fuse rating: 50 A • Auxiliary voltage: 24 V DC • Control voltage: 220 V Additional equipment • Bar feeder: Tornos Robobar SBF 326 • Bar diameter range: 3–26 mm • Guidance: Hydrodynamic oil-filled guide channels • Interface: Delta HMI touch screen independent control panel • Quick change: Tool-less replacement of pusher and guide bushings • Chip conveyor: Ring Sun RSCW50 • Model: RSCW50; Serial: TA39614110 • Motor power: 0.2 kW • Operating voltage: 400 V, 50/60 Hz • Weight: 313 kg Ncedozl A Sdspfx Aitew • YOM: 2022-06 • Mist extraction/filtration: Micronfilter Kube Series oil mist collector (mounted on top-left bracket system) Technical Specification Counter Spindle Yes

Condition: good (used), machine/vehicle number: T61599, TORNOS DECO 10, serial number T61599, 9-axis, equipped with a TORNOS ROBOBAR automatic bar feeder, additional tray, lathe cleaned and in working order. Nodpfx Aiozk Ug Djtscw

Condition: used, Year of construction: 1995, turning diameter over bed 50 mm spindle passage 26 mm turning length 275 mm total power requirement 12 kW weight of the machine ca. 4500 kg Ncjdst Hwp Topfx Aitew CNC-Sliding Headstock Lathe, Opposite Headstock

Condition: good (used), Year of construction: 2018, functionality: fully functional, The equipment is as shown in the pictures. All tools visible in the pictures are included. Ncjdpjx Na Slsfx Aitsw

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION Ncedpfsyacvtox Aitew - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 46739 [h] - Number of spindle hours : 16560 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 51458 [h] - Number of spindle hours : 16839 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit Ncjdpfx Ajyacvmjitow - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS Ncjdpfx Aioyacvgstow - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 48352 [h] - Number of spindle hours : 12855 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 Nedeyacvaopfx Aitecw - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 59001 [h] - Number of spindle hours : 19963 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : FMB Minimag20/3200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 61198 [h] - Number of spindle hours : 18592 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : FMB Minimag20/3200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. Nodpfx Aisyacu Notscw - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 69312 [h] - Number of working hours : 26781 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : FMB Minimag20/3200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. Nodpfx Aisyacu Aetjcw - Electric transformer

Condition: good (used), Year of construction: 1998, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1700 x 1010 mm CNC turning machine Completely overhauled, both electrically and mechanically: Loading magazine: LNS Tryton 112 MAIN SPINDLE Ncodpfjzhxk Iex Aitew - Max. bar diameter: 10 [mm] - Travel: 66 [mm] - Spindle speed: 16,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] COUNTER SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2003, control FANUC Ncedpfezhxkzox Aitsw weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1 x 2 m CNC turning machine Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2000, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1,0 x 2 m CNC turning machine Completely overhauled, both electrically and mechanically: 10/2018 Loading magazine: LNS Tryton 112 Ncodpfxszhxkue Aitjw --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: used, Year of construction: 2006, operating hours: 59,800 h, machine/vehicle number: IntNr231615, A compact, high-precision horizontal CNC bar feed milling machine is for sale: ALMAC FB 1005 CNC, manufactured in 2006, equipped with a FANUC 16i-MB / 161MB control system. Technical data: Manufacturer: ALMAC / Tornos Type: FB 1005 CNC Year of manufacture: 2006 Control system: FANUC 16i-MB / 161MB Axes: 6 axes Travel ranges X / Y / Z: 280 / 230 / 120 mm Working feed rate X / Y / Z: Rapid traverse: 12 m/min Resolution: 0.001 mm Front spindle block: with spindles Side spindle block: 4 spindles Vertical spindle block: 4 spindles Ncsdpfezgggbjx Aitsw Parting spindle: 1 spindle Rear machining: 2 or 3 spindles Standard spindle: Speed: 1,000–12,000 rpm Power: 1.4 / 3.4 kW Parting spindle: Speed: 100–3,000 rpm Power: 1.4 / 3.4 kW Tool holder: ESX 20 / HSK 32-A Indexing table / C-axis: Bar feed: Pneumatic: 25 mm or CNC W-axis: 50 mm Swiveling / B-axis: Manual: 0–20° or CNC B-axis: 0–20° or -5° to +45° for short bars Coolant system: Coolant tank: 205 l Flow rate: 40 l/min Standard filtration: 35 µm / 28 µm Temperature control: 3,000 W for ΔT 3 °C Connection data: Installed power: 10 kVA Voltage: 3 × 400 V / 50 Hz Compressed air: 6 bar Dimensions with bar support: L × W × H: 1,800 × 4,250 × 2,060 mm Weight: approx. 1,800 kg The machine can be inspected in operation by prior arrangement. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2012, operating hours: 37,500 h, machine/vehicle number: IntNr231616, Ncedpfx Aozggfqjitjw

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018), all overhauled by B&LOverhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton Njdpfxox D D Ikj Aitjcw • Directional spindle stop S1 Additional Equipment available (Pictures 17-21): • Equipment to be equipped with Robobar SSF 3 m loading magazine • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 2 different hybrid drums Technical Specification Counter Spindle Yes

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] - Number of hours under power : 88873 [h] - Number of working hours : 47253 [h] Nedozi E U Aspfx Aitscw EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 vertical et horizontal - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : IEMCA BOSS 542 R 32L

Condition: used, Tornos CNC-controlled multi-spindle turning center Type/Model: Torno Multi Deco 20.8 Condition: Used, very well maintained Machine hours: approx. 65,724 h Technical data: Bar diameter: 5-20 mm Max. part length (without secondary operation): 100 mm Max. part length (with secondary operation): 80 mm Spindle rotational speed: up to 5,000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Number of numerical axes: 22 Facing slide (axial): 2 Cross slide (radial + axial): 5 Nsdozgw Aaepfx Aitscw Longitudinal slide: 7 Parting slide: 1 Counter spindle motor power: 1.1 kW Dimensions (L x W x H): approx. 5,880 x 1,400 x 1,950 mm Weight: approx. 7,200 kg

Condition: used, Year of construction: 1981, Tornos 8-spindle automatic lathe, mechanically controlled Type/Model: Tornos BS 20 Condition: Used Year of manufacture: 1981 Nedpjzgwv Tsfx Aitjcw Technical data Max. bar diameter: round 20 mm Max. bar diameter: square 15 mm Max. bar diameter: hexagonal 19 mm Max. machining length (bar feed): 60 mm Number of spindles: 8 multi-spindle Spindle speed: 20 stages from 620 to max. 6,035 rpm Number of cross slides: 8 (one per spindle) Production output: Max. up to 50 parts per minute Dimensions (L x W x H): approx. 2465 mm x 1200 mm x 1700 mm Weight: approx. 5,900 kg Equipment / Accessories: Retrofitted with 2 CNC slides in positions 3 and 6 Complete control cabinet overhaul Modification of the cam shaft with continuously adjustable servo drive Main spindle with spindle brake

Condition: used, Tornos CNC-controlled multi-spindle automatic lathe Type/Model: Tornos MultiDeco 20.6 Condition: used Operating hours: 45,300 h Bar stock: Ø 5-22 mm Max. part length without secondary operation: 100 mm Max. part length with secondary operation: 80 mm Spindle rotation speed up to: 4000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Counter-spindle motor power: 1.1 kW Number of numerical axes: 17 Axial slide: 5 Cross slide: (radial and axial) 5 (Pos. 1 to 5) Facing slide: 1 CNC-controlled secondary operation slide with up to two secondary operation tools (Pos. 7) Connection value: 35 kW Dimensions (L x W x H): approx. 8053 mm x 1508 mm x 2210 mm Weight: approx. 8500 kg Equipment/Accessories: - Control system: Tornos PNC Deko - HIRTH - Gear cutting drum locking system - Spindle stop at Pos. 4 (activated via installation curves) - 2 quick-change drilling spindles XC06020.01; GWS Modular 40004; up to 80 bar - 3 fixed drilling units GWS Modular 40004; up to 80 bar - 7 base plates for tool holders GWS 60 AD60032 (Göltenbodt) - 7 base holders for turning tools GWS 60/41 (Göltenbodt) Njdpfszgwtxex Aitscw - Bar feeder integrated: TORNOS MSF 522/6 - Material guide channel for bar feeder - CO2 extinguishing system Kraft und Bauer - Oil treatment system Knoll: VRF 500/1550 - 2 high-pressure pumps, each 40 L/40 bar - 1 pump, 20 L/35 bar - Oil capacity approx. 2000 liters - Chip conveyor Knoll - No discharge chute

Condition: used, Year of construction: 2008, Motor spindle turning machine: Tornos Type/Model: MultiAlpha 8x20 Condition: used Year of manufacture: 2008 Machine hours: 45017 h Technical data Capacities & travels Bar diameter (round material): up to max. 22 mm (with turned bars up to max. 25 mm) Workpiece length: max. 100 mm Longitudinal travel (Z-axis): 80 mm Cross slide travel (X-axis): 50 mm End units (longitudinal slide): 200 mm Spindle & axes Ncedozgwp Hopfx Aitjw Main spindle: 8 independently driven motor spindles Counter spindles: one counter spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axes: 34 axes Tool slide: 7 cross slides X/Y (position 1 - 7); 1 facing slide X (position 8); 7 longitudinal slides (position 1-7) Drive power & speeds Speed of main spindles: 0 - 8,000 rpm Power of main spindle motor: 11.2 kW Torque of main spindle: 17 Nm (optional up to 25 Nm) Speed of counter spindle: max. 8,000 rpm Power of counter spindle motor: 3.7 kW Torque of counter spindle: 8.3 Nm Equipment / accessories: Fanuc 30i control system 4x Motoquill 8x Fixed drilling spindle with Modular 40 mount Base holder Göltenbodt (fixed to axes) Knoll system with turbo filter system Manipulator for part handling max. bar diameter Ø 20 mm max. part length 100 mm 1 x Y-axis installable

Condition: used, Year of construction: 1998, operating hours: 75,336 h, functionality: fully functional, machine/vehicle number: T62204, Equipment: documentation/manual, TECHNICAL DETAILS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm Nodpfx Aiew Stndjtjcw - Max. machining length: 200 mm - Spindle speeds: 10,000 rpm - C axis indexing precision: 0.1° COUNTER SPINDLE - Max. bar diameter: 20 mm - Spindle speeds: 10,000 rpm - Spindle power: 3.7 kW - C axis indexing precision: 0.1° - Number of guide bush holders: 2 GUIDE BUSH HOLDER 1 - Number of positions: 5 GUIDE BUSH HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Live tooling speed: 8,000 rpm END ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Live tooling speed: 6,000 rpm SECONDARY OPERATION - Number of positions: 7 - Number of driven positions: 3 - Live tooling speed: 8,000 rpm POWER SUPPLY - Supply voltage: 400 V - Total installed power: 14 kW WEIGHT & DIMENSIONS - Machine footprint: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC: Fanuc - Driven tool motor at: S2, S3, S5 vertical/horizontal - Rotating guide bush - Parts catcher - Workpiece ejection - Coolant tank - Bar loader: ROBOBAR SSF

Condition: excellent (used), Year of construction: 2013, operating hours: 53,000 h, Year 2013 Operating hours: 53,000 Nsdpfoznmr Hox Aitocw 10 controlled linear axes Bar diameter capacity: ø25.4 Complete with IEMCA MINIBOSS 325r bar feeder.

Condition: good (used), Year of construction: 1999, Multi-spindle automatic lathe TORNOS MultiDeco 26/6, No. T-61796, year of manufacture 1999, FANUC control, chip conveyor, bar loader IEMCA Sir 32F, No. 98072003, year of manufacture 1998 Ncsdpfjunvwlox Aitjw

Condition: new, Year of construction: 2025, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, 1 multispindle TORNOS SAS16-DC in rebuilding - new electrical cabinet SIEMENS or FANUC, to choose – pick-up with brake – adjustable stop with counter operation – 3 independent feeding system – several tool-holders and drillings – drum bar with support – Options :automatic bar loader IEMCA PRA, numerical tapping, CNC cross slides, etc... Ncsdjugl S Ispfx Aitow Contact us.