Used Multi spindle machines for sale (212)

Condition: excellent (used), Year of construction: 2012, Fanuc 18iTB control Main spindle clearance 42 mm Cgolq Hatjuldflj Hot 6 axes Front horizontal slide designed as cross slide (X1/Z1) Z2 turret slide including: 6-position turret, IKZ, turret disk can be swiveled on both sides Rear horizontal slide X2 Two vertical slides X3 and X4 10 tool positions available Chip conveyor Bar feeder SAMECA

Condition: excellent (used), Year of construction: 1973, 3 Gildemeisters AS32-6 in good state for sale Including different separate spare parts, among which a new tapping device, a new bronze crown wheel for the main drive, a cross drill device, several gripping spindles for processing the rear of product and several other spare parts Cslod S E Itsq Hat Hsgt Total price is €45.000 for the whole package (3 Gildemeisters and spare parts)

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Cslqotqfq Uo Hat Hsgt

Condition: used, Functionality: fully functional, Number of spindles: 8 Spindle passage: 32 mm Item: Multi-spindle cam-operated lathe in a reworking version with spindle stop Integrated workpiece loading and unloading system Brand: Schütte Type: AF32 Dnt Year of construction: 1999 Siemens Simodrive 611 control electronics Dnt version motors Chip conveyor with scraper blades Drilling devices no. 2 Air conditioning for electrical cabinet Quick-change tool holder series Cam series Cgjlev E Hcdoq Hat Hjt

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, - Machine rebuilt in 2006 with AC motors for revolutions and advances - Pietro Cucchi integral automatic loader - Pick-up with AC movement with motor - Threading device - Chip conveyor Cgelq Hjv Ebltoat Het - Tool holder - Cams - Set of new bearings for spindles (to be mounted)

Condition: new, Year of construction: 2005, Grinding spindle type: SFAA-K-200 x 450 - 140x700 Manufacturer: Spindellagerungstechnik Fraureuth GmbH Cjlq Hatevd Dkpe Hogt Length: 700 mm In use, order as stock.

Condition: excellent (used), Year of construction: 2014, operating hours: 8,500 h, Functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 150 mm, turning diameter: 250 mm, TECHNICAL DETAILS Machine type Vertical turning machine with 2 moving turning spindles and 2 tool turrets Operating hours Operating hours: approx. 8,500 h Machine cycles: 497,000 Control system Siemens 840D Spindle Spindle nose size: A6 DIN55026 with Schunk D260 mm Max. Speed: 4,500 rpm Drive power: 12.5 kW Working range Max. Turning length: 150 mm Max. turning diameter: 250 mm Cross slide Axes: X and Z-axis Tool holder: VDI40 according to DIN69880 Number of stations per turret: 8 Workpiece feed Conveyor belt type: Rectangular table for approx. 30 flanges, diameter 200 mm, approx. 150 kg Workpiece handling: Servo-pneumatic lifting axis for feeding and returning the workpieces to the clamping device Special functions Production of identical workpieces on both spindles or of two different workpieces possible Turning device with gripper diameter 250 mm, installed between 1st and 2nd spindle Finished part storage Cgjlq Haeu Nhc Rot Hst Type: Rotary table with diameter 1,500 mm for approx. 30 flanges, diameter 200 mm, approx. 150 kg EQUIPMENT Chip conveyor with coolant tank

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, TECHNICAL DETAILS Celevvt Hweq Hat Hsgt Work spindles: 6

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. Cslqotqfq Rs Hat Hegt

Condition: used, Year of construction: 1970, Packing ? mm Colouynltjq Hat Hjgt Shipping weight 220 kg

Year of construction: 2024, Condition: new, Gildemeister 20 completely rebuilt to new condition -AC motor for production time control -AC motor for threading -GM-type soundproof casters -frequency converter for spindle speed programming Cgjlofzk S Djq Hat Hst -bar passage 20mm ,25mm , 28mm with integral loader -Optional : X and Z axis NC cross slides, NC pickup with NC pickup slide -EC brand

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Chuck lathe (automatic gripper chuck lathe) alternatively conversion to bar lathe possible With tapping drive and tapping spindle. TECHNICAL DETAILS Cgelq Haeu Nh Dzot Hst largest clamping diameter normal, round 18.00 mm largest clamping diameter square 13.00 mm largest clamping diameter hexagonal 16.00 mm Spindle circle diameter:180 mm Bar feed (normal): 80 mm Longitudinal slide travel: 63/50 mm total / working travel Cross slide travel: 32/20 mm Infinitely variable spindle speed: 800-10,000 rpm Infinitely variable main time: 0.24-45 sec. Secondary time: 0.3 sec. Working spindles: 6 MACHINE DETAILS Weight approx. 4.5 to. EQUIPMENT incl. spindle stop device position 3+4 with extended stroke CNC cross slide on position 5 Coolant device Chip conveyor Loading device (gantry system) currently not connected but available, not included in the scope of delivery scope of delivery

Year of construction: 1987, Condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 Colq Hatein Ub Tj Hsgt - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 75,134 h, Functionality: fully functional, TECHNICAL DETAILS Work spindles: 6 Cgslqevvt Eye Hat Hst MACHINE DETAILS Series / number: 3 / 1 Weight: 6.6 t Electrical connection: 3 NPE, 50 Hz, 400 V Power consumption: 35 kW

Condition: excellent (used), Year of construction: 2017, operating hours: 40,492 h, Functionality: fully functional, controller model: Siemens 840D-SL, VERTICAL TWO-SPINDLE MILLING CENTER VSC 315 DUO KBU Systems (operating hours and wear similar): 1x VSC 315 DUO KBU available Systems were in production until 08/2024 (linked to several systems) Available immediately Systems are dismantled ready for transport Pick up yourself at the Haldensleben location Loading/transport can be offered optionally Cgjlq Hasuix S Hjt Hot

Condition: excellent (used), - Chip conveyor with extractable tray - 4 cross slides pos 1,2,5,6 - AC motors for spindle speeds and feeds - New Siemens electrical cabinet - Siemens PLC 7.300 control panel - Machine with hydraulic pick-up and hydraulic cross slide Cjlq Hasq Tq Imot Hjgt - Tool holders and equipment on request Jfghuc9 Cycle time studies and part set-up on request.

Condition: excellent (used), Year of construction: 1996, Shooting spindle , full automatic loader Pietro Cucchi Cgjlq Hajraz Utet Hot

Year of construction: 2002, Condition: good (used), Functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS Celqon Uum He Hat Hjgt The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: used, Year of construction: 1996, Functionality: fully functional, TECHNICAL DETAILS Control type: CNC Number of spindles: 6 Spindle passage: 18 mm Turning length: 63/50 mm MACHINE DETAILS Machine weight: approx. 4.5 t Spindle drive motor: 11 kW Cslq Hatotqm Ine Hjgt

Condition: used, Year of construction: 1996, Functionality: fully functional, TECHNICAL DETAILS Control type: CNC Number of spindles: 6 Spindle passage: 18 mm Turning length: 63/50 mm MACHINE DETAILS Cgjlq Hatotmppns Hst Machine weight: approx. 4.5 t Spindle drive motor: 11 kW

Year of construction: 2005, Condition: excellent (used), Multispindle lathe Schütte SF26S DNT Celq Hatsg Ezv Hj Hegt

Condition: excellent (used), MORI-SAY 6/32 rebuilt in standard configuration with : - 4 composite slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for feed speed conditions Chip conveyor : Removable tank with chip conveyor Celq Hajmhfxmst Hegt Pick-up : Synchro pick-up Pick-up brake Hydraulic slide for rear machining Other accessories and special accessories on request

Year of construction: 1996, Condition: good (used), Mehrspindel Schütte SG18 Celq Haeg S Tx Iet Hsgt

Condition: new, Year of construction: 2023, Number of spindle: 6 Max bar diameter: 32/42 mm Max. feeding length: 150 mm Spindle speed: max 5.000 rpm This machine combines the high productivity and robustness of the cam-operated multi-spindle with the advantages of numerical control, which has been made easy for the operators to use. The machine is equipped with a Siemens 840D Solution line dual NC for the control of 24 basic axes and 20 additional axes as an option. Cslq Hokvnvveat Hogt The 6 independent spindles with AC motors have a power of 7 kW allowing the machining of difficult materials.

Year of construction: 2001, Condition: excellent (used), Multispindle lathe Schütte AG20 Colqshrihyj Hat Hjgt