Used mounting technology for sale (159)

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Cedpfx Absudkz Njbsrk

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Cjdsn Htktspfx Abbjrk

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Ask for specification! Credow Ty Hcjpfx Abbok

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, MPM AccuFlex Stencil Printer Stencil Printer The MPM AccuFlex is an automatic stencil printer designed for medium-volume, high-product variety printing. Maximum PCB size: 584 mm x 508 mm (23" x 20") Minimum PCB size: 75 mm x 50 mm (3" x 2") PCB thickness: 0.8 mm to 5.0 mm Maximum PCB weight: 4.5 kg Maximum component height below the PCB: 15 mm Transport speed: Adjustable Transport height: 860 mm to 960 mm from floor Print speed: 5 mm/s to 200 mm/s Print area: 559 mm x 498 mm Codpfxov T T Dkj Abbjrk Stencil frame size: Standard 737 mm x 737 mm (29" x 29") 240 V AC, 50/60 Hz Compressed air supply: 0.63 MPa (6.3 bar) Dimensions (H x D x W): 1575 mm x 1448 mm x 1314 mm mm Weight: 700 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, The BF-Comet is equipped with Saki's unique line-scan camera image acquisition concept and vector analysis and can be used for all inspections (SMD, THT), both before and after soldering. Due to the very short cycle times, the operator practically never has to wait. This makes Saki technology ideal for benchtop use. The high-precision line-scan camera forms the central unit of the Saki image acquisition concept. During image acquisition, the circuit board is moved in one axis under the stationary optical system. The line-scan camera records line by line, with each line being recorded four times, alternating with the different light sources. After a few seconds, the image of the entire circuit board is available for inspection and programming. Variable and constant illumination methods are essential for reliable image analysis. The Saki system includes three central, variable units: coaxial (top), offset (side), and low (low) light sources. Thanks to the line scan concept, every component, regardless of its location on the circuit board, is always at the same distance and angle to the respective illumination. This results in evenly illuminated images for evaluation. The so-called top light unit is a 100% coaxial light source, which is introduced into the vertical camera view by a half-mirror. This creates a shadow-free image for 2D viewing. This is especially important for reliable solder joint inspection and inspections between tall components. The MLT illumination provides a clear, color-coded display between tinned/soldered and non-tinned surfaces. Surfaces without tin or with poor wetting are displayed in red tones and can thus be reliably detected using color recognition algorithms. Foreign objects such as "lost" components, solder balls, scratches, damage, etc. can be detected with Saki's ECD function with a little additional programming effort. Since the image of the entire circuit board is already available, this function only requires a few seconds of additional inspection time (computing time). Foreign Body Inspection - Automatic Library Creation. Crodewbgwrspfx Abbsk Saki's KPK function automatically creates a library for unrecognized/new components with a presence inspection tailored to the assembled components. - Automatic X/Y coordinate generation for THT solder joints. If the layout data (CAD) for the THT solder joints is missing, this function can be used to automatically generate a library using an unsoldered and a soldered circuit board. - Programming Wizard The software offers a wizard to guide the programmer through the entire programming process, from importing the CAD data, aligning the data, and assigning libraries.

Condition: used, 18EPE12Q, Cleco, pistol screwdriver with transducer Model: 18EPE12Q Csdpjt Ig Eaefx Abbork Condition: Used

Year of construction: 2019, condition: as good as new (ex-display), Magnetic palletizing system 820x820 Recording surface pneumatic steering More details on request, at best by telephone Crsdpfeff Hgdox Abbjk

Year of construction: 2007, condition: ready for operation (used), Max. circuit board dimensions: 330x420-400x495mm, conveyor speed: 0-2.5m/min, an on-site inspection is possible. Credpfx Aoqy I Ntjbbok

Year of construction: 2012, condition: used, Machine is in operational condition and recently taken from the operation. Machine is located in Estonia and is available to be shipped. Crodpsxm S Htofx Abbok Ask for additional information!

Condition: used, functionality: unexamined, Year of construction: 2015, MAGAZINE LOADER, magazine loading system, magazine loader, shuttle magazine unloader, magazine feeder, magazine unloader, connecting conveyor, magazine loading system for large circuit boards, destacker: YJ LINK ALD-CE SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) (2x) YJ LINK magazine loading system for large circuit boards Size: 1500 x 2850 x 1830 mm (WxDxH) YJ LINK ALD-CE magazine loader This device is located at the beginning of the SMT line. It transfers printed circuit boards (PCBs) stacked in a magazine rack to the downstream machine one at a time using a pneumatic pusher. Touch screen (control panel) Controlled by PLC (Programmable Logic Controller) SMEMA interface YJ LINK AUD-CE Shuttle Magazine Unloader Shuttle Magazine Unloader Located at the end of the SMT line, this device consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) one at a time into an empty magazine rack using a pneumatic pusher mounted on the single shuttle. LED tower lamp (with buzzer) Touch screen (control panel) Controlled by PLC SMEMA interface Integrated single shuttle conveyor YJ LINK ADL-CE Magazine Feeder The YJ LINK ADL-CE is an automatic magazine feeder used in SMT production lines to efficiently load printed circuit boards (PCBs) into magazines. YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ACC-CE Connecting Conveyor Size: 1500 x 610 x 950mm (WxDxH) YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ADL-R90 Destacker Destacker ￭ LED tower signal light (with buzzer) ￭ Touch screen (operator panel) ￭ Controlled by PLC ￭ SMEMA interface ￭ 40 pcs stacking capacity at 1kg ￭ Safety light barrier on the screw Crjdpfx Aov Hpblsbbok ￭ Automatic width adjustment ￭ Double plate structure Transport height: 950mm ± 20mm Color: EX8816(S)-SR-WH020 (KCC) Conveying direction: Left to right / Right to left Fixed rail: Front / Back PCB edge: 3mm PCB thickness: 1.0mm ~ 2.0mm Conveying speed: 200mm/s Conveyor belt: Antistatic 10¹⁰ ~ 10¹², temperature: 70˚C Air supply: 0.5Mpa (5 bar) Air consumption: 4 ℓ/min Power consumption: 430W Power supply: 230V / 50~60Hz, 1 phase

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Model NPS510E Fully automatic in-line stencil printer with 2D paste inspection - Max. PCB size: 510x450mm - Max. stencil size: 736x736mm - Cycle time (without printing): 8 seconds - Alignment repeatability: 12.5µm at 3 Sigma - Squeegee pressure: 4-30kgf - User interface: Windows - Dimensions: WxDxH 1.20 x 1.40 x 1.50m; 900kg Included: Crsdpfxjvuprmj Abbsk - Stencil cleaning system, wet/dry/vacuum - CCD camera for 2D inspection of paste print and stencil - Automatic conveyor belt width adjustment - Support block - Support pins - 2 metal squeegees

Condition: used, 18ESE06D2, Cleco, Corded Inline Screwdriver with Torque Control Credpfx Abst Ig Arsbok Model: 18ESE06D2 Condition: Used

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Cjdpfx Aewhvrrjbbsrk Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Year of construction: 2006, condition: ready for operation (used), An inspection is possible. Codpfx Abenk Uwxjberk

Year of construction: 2015, condition: ready for operation (used), Good working condition 2D AOI system from Cyberoptics, model QX150i. Cedpoxm Sytofx Abbjrk Comes with server and SW. For additional pictures and spec, please ask us.

Year of construction: 2008, condition: used, machine/vehicle number: SN Nr. 803603, For sale is our Ekra X 6 HSP screen printer. The unit is already in our warehouse and was operating flawlessly until the end. A few days ago, the machine underwent a reference run; everything functions as it should, except for the Y-axis, which does not find a position (zero point). This may be a minor issue, as the department previously responsible for the machine confirmed it was working. We do not wish to invest further time in this equipment and are therefore drastically reducing the price to €2,800. Year of manufacture: 2008 Immediately available. We are happy to answer any further questions about the machine. Crsdpfxjwgk Sqj Abbek

Year of construction: 2008, condition: used, Equipment for fitting assembly 1 FAA S3 for folding, opening and opening and folding fittings for wooden and PVC casements in automatic design, working procedure from left to right - automatic clamping and positioning sash - automatically travelling screwdriver with automatic screw feed, servo-driven, working in X and Y axis - preparatory assembly table fitted with slide rails, dimensions 1,300 x 3,000 mm, including ten automatically recessed wing stops, servo-driven travelling stop for hardware cutting with PC control - Grid rack for fittings - 33 compartments, including PC compartment - PC control, floppy drive, Windows NT Wing transport device 1 for automatic wing feed for the second screwdriving cycle Device 1 for automatic height adjustment of the travelling screwdriver via PC. Device for manipulation of scissor fittings 1 for closing and hooking open scissors Hand-held reading device 1 Automatic handing device/ 1 transfer of the forged wing to the next station ETHERNET network card 1 Number Machine name Pcs Item Automatically folding and feeding 1 table for removing the galvanised wing in horizontal position for subsequent transport and storage in vertical position into the appropriate shelving rack, for sash dimensions with a width of 350 - 1.650 mm and a height of 350 - 2,500 mm, including cabinet switchboard and SPS control Servomotor landing gear 1 and servo controller for travel of the tilting table, sorting trolley, including drive unit, max. speed 65 m /min Rail tracks 7m made of thick-walled U-profiles for roller bogies with toothed shaft for running a tiltable table and sorting trolley Compartment rack (15 compartments) 3 with automatic wing insertion, compartment width 110 mm, compartment height drawer height 2.600 mm, depth of the shelf 1.100 mm, overall width of the rack 2.130 mm Display indicator 1 to display the relevant compartment shelf, including software equipment for sorting the leaves into appropriate compartments Protective fence 1 Codpfx Aow Tcu Nsbberk Entrance door for protective fence 1 with limit switch

Condition: used, 48ESE36D3, Cleco, Corded Inline Screwdriver with Torque Control Model: 48ESE36D3 Condition: Used Codpfst Ig D Njx Abbsrk

Year of construction: 2013, condition: ready for operation (used), Technical details on demand. Crjdpfx Ajg Uwx Rsbbjk

Condition: used, Year of construction: 2015, Operational machine - has been in use daily. Vacuum chamber has not been used for the past 1,5 years due to no need. Center support can only be adjusted manually. Machine location is EU. Ask for additional information! Cjdpfx Absxlqnysbjrk

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: Serien Nr. B888 - 12037340, For sale is our Siplace X2 placement machine in very good condition. Cedpfxow Ehq Is Abbork The placer is equipped with: 2 x DLM3 12-nozzle heads Single-lane transport Software: 605.04 SPI Hotfix 003 2 rows of nozzle changers Machine fully calibrated and mapped Current and valid MFU protocol BE camera: SST 28 LP camera: SST 34 Station PC with Windows 7 Machine is CPP capable!!! Reference run video available.

Year of construction: 2008, condition: used, Operational condition machine! Cjdpfx Aexlflgsbberk - 4 axes - Component height up to 100 mm - 3 valves - 2 tilters for valve inclination - 2 tanks - External programming PC

Year of construction: 2015, condition: used, machine/vehicle number: 2903, For sale is our BDTronic dispensing system including Knödel drying oven. The system is fully operational; however, one dispensing head occasionally presents some issues and will require maintenance in the near future. The system is sold including the drying oven (Knödel paint dryer – dryer model) and transport system (see photos). Location: Zollner Satu Mare / Romania We are also offering: - Asys TRM 03 (year 2012) - Asys FPS (year 2010) - Siplace S 27 and Siplace F 5 HM (year 2006) - Exra X6 HSP (year 2008) for spare parts - Knödel Drying Oven (year 2015) - Nutek Coating Inverter (year 2014) Crsdpfew S Dfyjx Abbok - Rommel LAG WA 470 (year 2006) - Rommel LEG WA 470 (year 2006) - Autosplice placement machine AIS 5000 for 2 placement heads with QCHT principle (year 2001) - Laser marking system: Baasel Lasertech / SMM 65 (year 1998) - Viscom 7056 RS (year 2012) - Many other Rommel handling modules Please contact us— we will be happy to provide further information and photos of our equipment.

Year of construction: 2014, condition: used, Machine in good operational condition and always serviced by the OEM (yearly maintenance). Credpfx Aboxfryqsbok Has two high resolution cameras for the Midas head. The right line scan camera on the machine will sometimes will not start up but will do after a restart. Machine available end January 2026. Magazines/Feeders also available - please look at the picture for the list.

Condition: used, Year of construction: 2016, Machine in good operational condition and always serviced by the OEM (yearly maintenance). Crjdpfx Abjxfrx Tsbjk Machine available end January 2026.  Magazines/Feeders also available - please look at the picture for the list.