15
#2 Pines Bender, with tooling for stainless steel tube 2'' & 1-1/2'' and 42mm Galvanised pipe. The machine is in good working condition and can be viewed working upon request. This machine was set up for bending stainless steel and galvanized handrails. The reason we are selling the machines is because the company is no longer in operation.
Bl8bghioyd
The machine is located in Barbados and arrangements can be made to ship out to you in a 20ft container. (Does not include shipping)
Any further q...
2
bar material dia. 6 - 67 mm
bar length 1525 mm
Channel sizes . mm
voltage 400 V
total power requirement 0,4 kVA
weight of the machine ca. 350 Kg
dimensions of the machine ca. 2,15 x 1,10 x 1,20 m
Bfi0nl3qsv
- Fab.-No.: 27-0008
- the bar feeder unit was
installed at a CNC-Turning Center
Hwacheon HiTech 200B
Optical TESA VISIO CNC measuring machine with optical and motorized zoom.
XYZ 300,200,150 mm
CNC programmable with Hexagon software PC-DMIS Pro
Ydptg
Machine can be inspected under power.
Everything included. Machine, joystick, PC, cables and manuals.
In calibration; According to the sticker, must be recalibrated only in October.
14
Another 189 days
Spraybooth Technology Ltd four-bay spray booth and bake oven including (2) spray and bake ovens, (2) spray booths, booth size: 4,000 x 8,000 mm, Year: 2017, with Ovens to include (2) Riello 40 GS10, 116kW gas-fired burners, (2) Comtherm EK-1, 220kW gas-fired burners, (2) Flaktwoods ventilation system Rails for vehicle transport from spray booth to oven, Internal paint mix facility
Bokqzt2o
Available: August 2021
5
power capacity 1,5 kW
feed pressure 11 bar
liter capacity 160 l
weight of the machine ca. 0,15 t
dimensions of the machine ca. 1,5x0,5x0,8 m
Bel3ztwb
380 V, 50 Hz with plug and cable
colour: light grey
2 cylinder, boiler 90 l
compressor has been checked in our workshop, electr. testing report included!
5
Description: Huber Rotamat RO1 as fine screen version and EX-protection.
With spray nozzles and automatic press zone flushing.
The intended use of the RO1 is the separation of solids from waste water, compaction and washing out of the screened screenings.
Field of application:- Waste water treatment plants (municipal and industrial)
Flboetf20
-process and partial flows in industry
The machine had its last use in a municipal sewage treatment plant, a wash press and another screen RO 1 which were ...
3
Solvent-free parts cleaning for large applications
- natural cleaning process on biological basis
- no solvents, VOC-free
- Cleaner is non-flammable and absolutely harmless
- optimum cleaning performance by heating the cleaner to
41°C
Bk3s79wqy7
- particularly long service life
- constantly high cleaning performance
- no special protective measures necessary
- contains corrosion inhibitor
Special features
- extra large working surface for extra wide components
- Two users can clean simultan...
6
Fully automatic system for filling prefabricated molded plastic packaging (Unit Dose) for various media.
See attachment for models of packaging!
Power:
5,000 liquid packages per hour
Fb9cklh
depending on the container shape and the
Viscosity of the product.
Dosing range:
1 - 10 ml (depending on the packaging)
The dosing range is set when the machine is at a standstill via the control unit of the dosing pump.
The entire system is constructed according to the requirements of hygienic design an...
6
CO2 laser plotter
Producer: Kartier Technology
Model: P 13090
Working area: 1300mm x 900mm
Laser power up to 130W
230V, 50Hz power supply
Radiator: S&A INDUSTRIAL CHILLER model CW-5000AG
Fan
Bicocaj3u3
Extraction pipe
Condition: used, for technical inspection
12
If you are looking for a real fiber laser machine and no toy then you are exactly right here:
Fiber laser engraving machine for metal and certain plastics
Fiber laser Laser inscription skyLaser Mark - 20W 2D software optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser processing applications
Ideal solution for:
laser marking
Laser engraving
laser cleaning
laser ablation
Our fiber lasers skyLaser Mark systems are used exactly where the conventional...
15
TECNOLOGY ITALIANA - TECNUMERIK 30 CSM 1000 - 2001
Iejxqkb
5
Description: Huber Rotamat RO2 as fine mesh version and EX-protection.
With spray nozzles and automatic press zone flushing.
The intended use of the RO1 is the separation of solids from waste water, compaction and washing out of the screened screenings.
Field of application:- Waste water treatment plants (municipal and industrial)
Bdtovogiqn
-process and partial flows in industry
The machine had its last use in a municipal sewage treatment plant.
Type: RO 2
Manufacturer: HUBER Technology
Year...
15
- New machine made entirely of stainless steel including washing pump
Izfjft9
- Automatic basket drive
- Touch button to turn the basket outside of the cleaning procedure
- Tank cover and mesh filter under the stainless steel basket
- Protection against dry running
- Door security switch
- Connections for plate phase separator (oil separator)
- Inner basket width 790 mm
- Usable height of the basket to the lower edge of the nozzle holder
430 mm
- Flat jet nozzles
- washing pressure 3 bar
- in...
9
You can see all details in the pictures
Jkcltctf
5
TESA MH3D 3D measuring machine
Demonstration machine! As good as new!
Year of construction 2014 for fast 3-D measurement
of single parts and series!
Latest version in blue/white/black
Easy to use, manual 3D coordinate measuring machine with software control panel and base.
Due to its robustness, this device is ideally suited for use in the workshop as well as in the measuring laboratory.
Only one day of training is required, therefore it is also perfectly suited for the worker self-check.
...
12
skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications
The skylaser laser marking / engraving laser at a Glance:
Cvxbxtqu
Processing Area : from 110 x 110 or 120x120 or 300x300 mm (depending F- Theta lenses / 3D option)
Laser: IPG ( pulsed fiber laser , YTTERBIUM PULSED FIBER LASER )
SCANLAB galvanometer
Nominal laser power : 20W / 30W / 50W
New: Software controlled variably adjustable working width ( X axis...
7
Here we offer UV-irradiation Chamber a UVACUBE 2000.
Curing Chamber for curing UV reactive coatings, adhesives and potting compounds
as well as the sunlight simulation and a material aging test
System properties:
Ozone free Hönle spotlight with standard and special spectra
Two-stage power control
Optional temperature reduction of ACM
Technical data:
Supply voltage 230 V / 50 Hz
Power 2000 W
Dimensions Hxwxd 834 x 466 x 402 mm
Type: UVACUBE 2000
Condition: pre-owned / used
Scope of delivery: (See...
5
Description: Huber Rotamat RO1 as a fine-compute export with clot and EX protection.
With spray nozzles and automatic pressing zone flushing.
The intended use of the RO1 is the separation of solids from waste water, compaction and washing out of the sifted computing material.
Application:- Wastewater treatment plants (municipal and industrial)
-Process and partial flows in industry
The machine had its last use in an urban sewage treatment plant, a washing press and another rake RO 1 Bj 2004 whi...
4
Investment casting machine MK Technology Cyclone
Part size max. 500 x 500 mm
Ody7t
Complete trays in less than 4 hours at the touch of a button
1
The new Onyx CNC cutting machine is the result of over 25 years of cutting experience. It combines the most modern components
and a solid mechanical construction for demanding users who attach great importance to a particularly good working ergonomics.
The machine gantry has been modified with regard to even greater rigidity and temperature resistance in order to achieve maximum
to guarantee reliability and cutting accuracy even with material thicknesses up to 300 mm.
A specially developed safet...
15
LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid
Bag filter
Magnet for separating metal chips
Washable prefilter
Cleaning temperature is a comfortable 41 ° C
Environmentally friendly
Long service life of the cleaner
little space required
additional options are possible:
Filter housing with washable nylon filter
Nvl9j
Insert sheet made of V2A to protect the plastic surface
Trolley
cover
9
2D / 3D FIBER LASER MARKING MACHINE
skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications
Our systems are used skylaser Mark exactly where the conventional CO2 laser technology has its limits. By means of the fiber laser with a wavelength of 1064 nm can also be realized delicate structures in almost any material. In contrast to conventional milling process, the laser operates without contact, without forc...
4
A fully automated film rewinding machine according to GMP guidelines.
Foil rewinding machine type FUM-900 CP
Blrvm0w0ab
This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film.
Advantage of our machine: with two separate drives, we can guarantee both right and lef...
5
Description: Huber Rotamat RO1 as fine screen with splash water connection and switch cabinet.
The intended use of the RO1 is the separation of solids from waste water, compaction and washing out of screened screenings.
The screenings are discharged into the centrally arranged screw conveyor when the clearing arm stops in the 12 o'clock position.
Type: FR RO 1
Manufacturer: HUBER Technology
Year of construction: 1992
documentation:
Status: used - satisfactory
Read operating hours: 3977 h
...
6
Available: Immediately
Fk3fxtf
1
Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution.
The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles).
The design of the machine has been optimized over the years for maximum reliability, as confi...
3
sifting of granules (pellets) or other product
to be used for:
-sifting from grains in a grain press plant
-seven bulk charges
-seven product for sagging
Blizk0pmc3
-separation of meal product for hammer mill
characteristics:
-high capacity
- separation takes place by centrifugal force
-vibration free operation
-low wear and tear
-1.5 kW Moter
11
3D AC SERVO SkyCNC WM 2670 Series milling machine - 2600 mm x 2700 mm x 200 mm 10-fold tool change
11kW HSD BT40 spindle 3000-14000rpm
High precision milling and drilling with extremely high speed and quality.
As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball screw drive on all axes offer you the highest level of precision, accuracy a...
3
Centre grinding machine with new options in the area of Industry 4.0:
- The control system enables improved communication with the environment.
- The grinding process of the centre grinding machine can be more automated.
- The time for a complete grinding process is substantially reduced.
Machine features:
The machine type ZSM181 is used for the grinding process due to its modular design and
NC drive of the Z-axis mainly used for series production.
This machine is equipped with an open...
VERTICAL MACHINE CENTERS
V-series mobile stand BAZ
COBRA * HORNET
GANTRY 5-axis gantry MACHINING centres
GRANDER-20 * GRANDER-30
GANTRY 5-AXIS MACHINE CENTERS
HELIOS * FG SERIES
GANTRY 5-AXIS MACHINING CENTERS
Bdpmafvub9
INSPIRER * UNIKA * TWISTER 685
9
Used well preserved steel platform for vibration damping / vibration decoupling of measuring machines of the brand Bilz. The system was manufactured in 2017 to operate an automated optical measuring machine type: GOM ATOS ScanBox 5108 with low vibration.
It is also possible to operate other measuring machines with this system, e.g. a ScanBox 5120 without housing or tactile measuring machines.
The system has an active damper control. 4 Bilz BiAir 2 ED shock absorbers keep the entire plate virtua...
1
Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology and the accuracy of waterjet cutting. The synergy of the possibilities offered by both technologies allows you to take full advantage of all the benefits.
Thanks to its universal application and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small operations.
Main features
- Innovative, patented use of water jet and plasma t...
4
engine power: 2 x 22 kW
volume: 600 litres
capacity: 80 tonnes/hour
weight: 2500 kg
Bko9umjcuj
-adjustable mixer knives in height and retention time
-opposite rotating shafts
-by optimal mixing effect achieving a minimum pollution
-ability to mix liquids, steam and molasses and more
Pclass = working area X 1250mm x Y 1250mm x Z 25mm
skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals
Laser processing simple and high-precision - laser engraving, cutting at high speed and quality
Our new and best multifunctional talent impresses not only by the re-thought-out design, even the most experienced users. This fiber laser shows its outstanding capabilities as a fiber cutting laser in all indust...
4
Centre grinding machine ZSM5100 completely overhauled by the manufacturer in top condition.
Grinding head feed manual with adjustable work piece clamping range for a work piece length of 50-800 mm. Longer work pieces can also be machined with an optional additional module.
Centering bore angle 60° for centre diameters of 4-60 mm.
Hsnsxmv
Three different speeds of the grinding wheel (45'000 / 22'500 / 14'000 rpm).
Stable machine stand with precise guiding system for the vertical movement of the ...
4
Autoclave SRX 1100-3 HV VA PS
With Rotation
In Stainless Steel
For three Cages
With Hydraulic Closure
With Siemens Control
Bgrku2alid
With Pneumatic Clamping Device
Valves MF
Pumps EDUR
Transport Coating Galvosil
Valid TÜV-Certificate
was in use in baby food industry,
with Micro - Shuttle for automatic infeed of cages.
3
For sale molding platform for LED products. Good condition. Delivery to any country. Detailed information and photos are on request.
Bmywvmba23
1
The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important.
Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization.
Used in more than 400 industrial plants worldwide, the ...
Autovap:The Steam Water Spray Retort
Diameter: 1.400 mm,
Capacity: 4 cages,
with manual door,
with Siemens Steuerung,
with Heat-Exchanger,
TÜV-certification
- Proven retort concept - a system with minimal energy consumption
- Designed for new packaging - flexibility in pasteurisation and sterilisation
- Product quality - process fidelity, short cycle times
Longer shelf life with the Steam Water Spray Process
If steam and water consumption have highest priority and the container material is su...
PFEIFER technology skyCUBE M class
1250 x 650 mm - 180W CO2 laser
The flatbed laser center
The multifunctional flatbed laser center skyCUBE produced by PFEIFER technology in Saxony / Germany was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. This means that your purchase will pay for itself after a short time.
The machine housing made of welded and screwed steel construction is designed for industrial and c...
7
Year of construction: Apporoximately 2000-2003.
Number of spindles: 23.
Motor: 2 kw. 400W, 50 hz.
With pnuematic clamps.
Nuo9zx7r
10
EuRec Packaging Line consisting of a Round Baling Packaging System RBS-2 and a Feeding and Dosing Bunker ADS-1
Drive: Electric
Color: honey yellow
Year of construction: RBS-2: 2011; Bunker ADS-1: 2016
Blolbdr2xe
This plant has undergone extensive maintenance and repair, is in a very good condition and runs very reliably.
Further technical details and prices are available on request.
We reserve the right for interim sale without prior notice.
15
We manufacture and provide drums for mobile and stationary screeners, for :
Pronar MPB 18.47
Eibk7k0hm
Pronar MPB 20.55
Pronar MPB 20.72
also Terra Select, Eggersmann, Doppstadt, Komptech , Mc Closkey...
Bespoke maded drums are our specjality.
In case of any question, please contact me by mobile or e-mail.
1
The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important.
Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization.
Used in more than 400 industrial plants worldwide, the ...
Autovap:The Steam Water Spray Retort
Diameter: 1.100 mm,
Capacity: 4 cages,
with manual door,
with Siemens Steuerung,
with Heat-Exchanger,
with Chain conveyor,
TÜV-certification
- Proven retort concept - a system with minimal energy consumption
- Designed for new packaging - flexibility in pasteurisation and sterilisation
- Product quality - process fidelity, short cycle times
Longer shelf life with the Steam Water Spray Process
If steam and water consumption have highest priority and the con...
Das Laserbearbeitungszentrum skyCUBE M / P / SL - der neue Massstab in der Lasermaterialbearbeitung!
Laseroptionen nach Ihrem Bedarf: CO2 Laser 150W / 250W / 400W oder Faserlaser 1500W
PFEIFER Laserbearbeitungszentrum skyCUBE
Bearbeitungsbereiche:
Mclass = X 1250 x Y 650 x Z 100 mm
Pclass = X 1250 x Y 1250 x Z 100 mm
SLclass = X 1250 x Y 2450 x Z 100 mm
skyCUBE Laserbearbeitungszentrum - der neue Multifunktionslaser Graviermaschine und Laserschneidmaschine - Laserbearbeitung einfach - hochpr...