Used Mounting technology for sale (142)

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Year of manufacture 04/2008 Cjb E Ihfjv Ta Hlj Tjgt 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Dynamic preheating at the bottom Convection heating

Condition: used, Year of construction: 2015, Vitronics Soltec myReflow 7038 SMD reflow soldering oven Year of construction 2015 Pin length: 5 mm Pin spacing: 19 mm Cgjbouhfm Uj E Ihf Tet 10 heating zones 4 cooling zones N2 pressure: 6 bar LP width: 50 mm - 508 mm Max. component height: 40 mm / 30 mm (top / bottom) Transport height: 832 - 914 mm Width adjustment: electrical Software version: 4.0.6.b

Condition: good (used), Year of construction: 2011, Functionality: fully functional, The BF-Comet is equipped with Saki's unique line-scan camera image acquisition concept and vector analysis and can be used for all inspections (SMD, THT), both before and after soldering. Due to the very short cycle times, the operator practically never has to wait. This makes Saki technology ideal for benchtop use. Cob E Ihfewbgwrs Tjgt The high-precision line-scan camera forms the central unit of the Saki image acquisition concept. During image acquisition, the circuit board is moved in one axis under the stationary optical system. The line-scan camera records line by line, with each line being recorded four times, alternating with the different light sources. After a few seconds, the image of the entire circuit board is available for inspection and programming. Variable and constant illumination methods are essential for reliable image analysis. The Saki system includes three central, variable units: coaxial (top), offset (side), and low (low) light sources. Thanks to the line scan concept, every component, regardless of its location on the circuit board, is always at the same distance and angle to the respective illumination. This results in evenly illuminated images for evaluation. The so-called top light unit is a 100% coaxial light source, which is introduced into the vertical camera view by a half-mirror. This creates a shadow-free image for 2D viewing. This is especially important for reliable solder joint inspection and inspections between tall components. The MLT illumination provides a clear, color-coded display between tinned/soldered and non-tinned surfaces. Surfaces without tin or with poor wetting are displayed in red tones and can thus be reliably detected using color recognition algorithms. Foreign objects such as "lost" components, solder balls, scratches, damage, etc. can be detected with Saki's ECD function with a little additional programming effort. Since the image of the entire circuit board is already available, this function only requires a few seconds of additional inspection time (computing time). Foreign Body Inspection - Automatic Library Creation. Saki's KPK function automatically creates a library for unrecognized/new components with a presence inspection tailored to the assembled components. - Automatic X/Y coordinate generation for THT solder joints. If the layout data (CAD) for the THT solder joints is missing, this function can be used to automatically generate a library using an unsoldered and a soldered circuit board. - Programming Wizard The software offers a wizard to guide the programmer through the entire programming process, from importing the CAD data, aligning the data, and assigning libraries.

Condition: reconditioned (used), Year of construction: 2006, Functionality: fully functional, Our Siplace X 3 - X 2 package (2 x) is for sale. Consisting of: 1 x Siplace X 3 (model 2005) B 111 = €24,900 (excluding VAT) 1 x Siplace X 2 (model 2006) B 348 = €24,900 (excluding VAT) 1 x Siplace X 2 (model 2006) B 251 = €24,900 (excluding VAT) The machines are preferably sold as a package (line), but can also be sold individually upon request. Priority is therefore given to buyers of the entire line. All three machines have been inspected in our specialist workshop and tested for complete functionality (video reference runs for each machine are available upon request). All machines have a valid MFU. The machines are sold with tables (without MTC). Cgsb Esvu Suwj Ihf Tot The MTC feeder on machine B 348 can be converted to a standard X feeder upon request. Please see the photos (Excel list) for the technical data for each machine. We are happy to answer any further questions you may have about the systems. Location of the machines: Zollner Elektronik / Roding Warehouse / Buchenstraße 18-20 / 93426 Roding: Inspection possible by appointment. The stated net price is per machine and is negotiable.

Condition: excellent (used), Functionality: fully functional, Minder high-tech printed circuit board cutting machine / PCBA separator in top condition! Cgob E Iov Rmx Nshf Tot Type: "MD-ZM450" / "ZDF 450" Purchased in 2023. Hardly any signs of wear. Blade material: Japanese high-speed steel Blade usage: 500,000 x Working width: 450 mm Board thickness: 0.6 - 3.5 mm New price: €2,000 #8301

Condition: excellent (used), Year of construction: 2020, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: DF-2711, Hanwha SM471 SMT Plus Pick and Place Machine Features: Fast electric feeders that automatically adjust their pocket positions for ultimate synchronized picking Forward and reverse operation as standard Large PCB size of 510 mm x 460 mm as standard, with optional up to 610 mm Cjbswcta Ao E Ihf Tsgt 01005 Component recognition as standard Feeder capacity of 120 x 8 mm High accuracy of ±30 µm 3 σ/QFP, ±40 µm 3 σ/chip Small footprint of only 1650 mm x 1690 mm x 1535 mm Maximum power of 5 KVA

Year of construction: 2006, Condition: good (used), SEHO Powerwave 8440-LRT wave soldering system Year of manufacture 2006 400 mm working width Fluxer Ceb E Ihsv Szg Ref Tegt 1 convection heater 3 IR heaters Solder filling can be offered upon request

Condition: excellent (used), Year of construction: 2012, 9 heating zones 2 cooling zones (1 setting) Center support Electric width adjustment (programmable) 5 mm link chain conveyor Cobjv U Acxj E Ihf Togt Flux capacitor Interface: SMEMA HC2 Controller

Condition: not inspected (used), Year of construction: 2007, Functionality: unexamined, MPM AccuFlex Stencil Printer Stencil Printer The MPM AccuFlex is an automatic stencil printer designed for medium-volume, high-product variety printing. Maximum PCB size: 584 mm x 508 mm (23" x 20") Minimum PCB size: 75 mm x 50 mm (3" x 2") PCB thickness: 0.8 mm to 5.0 mm Maximum PCB weight: 4.5 kg Maximum component height below the PCB: 15 mm Transport speed: Adjustable Transport height: 860 mm to 960 mm from floor Print speed: 5 mm/s to 200 mm/s Ceb Eev T T Dks Ihf Togt Print area: 559 mm x 498 mm Stencil frame size: Standard 737 mm x 737 mm (29" x 29") 240 V AC, 50/60 Hz Compressed air supply: 0.63 MPa (6.3 bar) Dimensions (H x D x W): 1575 mm x 1448 mm x 1314 mm mm Weight: 700 kg

Year of construction: 1994, Condition: ready for operation (used), An IR reflow oven SAB is available. Voltage: 220V, current: 10A, power: 2.2kW, machine dimensions X/Y/Z: approx. 670mm/350mm/300mm, weight: approx. 30kg. On-site inspection is possible. Cgob E Ihfov Suf Te Tst

Year of construction: 2014, Condition: used, Machine in working condition. Was recently decomissioned. 4MP camera with T21 resolution and 42x42mm field of view Csb E Ihswd Ex Tef Tsgt Oblique view – "Chameleon Colour" module Extended inspection area in X-direction to 670mm 2D barcode reader from below

Year of construction: 2013, Condition: good (used), Functionality: fully functional, machine/vehicle number: 805717, 3 EKRA X4 Prof BE machines, 2x built in 2013, 1x built in 2012. Csbjrxdpds E Ihf Tsgt The machines can also be purchased individually. ----- Please tell us your offer price. Sale only within Europe, including Turkey ----- For technical data, see handout. Without packaging; any warranty is excluded. If you want to dismantle the system yourself, please provide the relevant information in your bid. We accept no liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Year of construction: 2018, Condition: ready for operation (used), Functionality: fully functional, NUTEK NTM310IXL Inverter (FLIP) unit. 2018. Looking very very good. Cgsb E Ihevtpfdsf Tet

Year of construction: 2019, Condition: as good as new (ex-display), Magnetic palletizing system 820x820 Recording surface pneumatic steering Ceb E Ijff Hgdohf Tsgt More details on request, at best by telephone

Condition: used, Functionality: unexamined, Year of construction: 2015, MAGAZINE LOADER, magazine loading system, magazine loader, shuttle magazine unloader, magazine feeder, magazine unloader, connecting conveyor, magazine loading system for large circuit boards, destacker: YJ LINK ALD-CE SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) (2x) YJ LINK magazine loading system for large circuit boards Size: 1500 x 2850 x 1830 mm (WxDxH) YJ LINK ALD-CE magazine loader This device is located at the beginning of the SMT line. It transfers printed circuit boards (PCBs) stacked in a magazine rack to the downstream machine one at a time using a pneumatic pusher. Touch screen (control panel) Controlled by PLC (Programmable Logic Controller) SMEMA interface YJ LINK AUD-CE Shuttle Magazine Unloader Shuttle Magazine Unloader Located at the end of the SMT line, this device consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) one at a time into an empty magazine rack using a pneumatic pusher mounted on the single shuttle. LED tower lamp (with buzzer) Touch screen (control panel) Controlled by PLC SMEMA interface Integrated single shuttle conveyor YJ LINK ADL-CE Magazine Feeder The YJ LINK ADL-CE is an automatic magazine feeder used in SMT production lines to efficiently load printed circuit boards (PCBs) into magazines. YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ACC-CE Connecting Conveyor Size: 1500 x 610 x 950mm (WxDxH) YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ADL-R90 Destacker Destacker ￭ LED tower signal light (with buzzer) ￭ Touch screen (operator panel) ￭ Controlled by PLC ￭ SMEMA interface ￭ 40 pcs stacking capacity at 1kg ￭ Safety light barrier on the screw ￭ Automatic width adjustment ￭ Double plate structure Transport height: 950mm ± 20mm Cgobov Hpble E Ihf Tot Color: EX8816(S)-SR-WH020 (KCC) Conveying direction: Left to right / Right to left Fixed rail: Front / Back PCB edge: 3mm PCB thickness: 1.0mm ~ 2.0mm Conveying speed: 200mm/s Conveyor belt: Antistatic 10¹⁰ ~ 10¹², temperature: 70˚C Air supply: 0.5Mpa (5 bar) Air consumption: 4 ℓ/min Power consumption: 430W Power supply: 230V / 50~60Hz, 1 phase

Condition: ready for operation (used), A full convection reflow soldering system SMT with nitrogen support is available. Heating zones: 2, heating length: 1080mm, max. process temperature: 300°C, cooling type: air cooling, cooling length: 550mm, heating and stabilization time: 15min, conveyor width: 300mm, conveyor speed: 2m/min, max. component height: 80mm, total output: 15kW, machine dimensions X/Y/Z: approx. 2400mm/1000mm/1450mm. On-site inspection is possible. Csbov Hrfye E Ihf Tegt

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Ask for additional information! Csb E Iowctn Hohf Tjgt

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, Kirsten wave soldering system Modula Wave Gen2 Inlet Fluxer Cjb E Iovvk Tnshf Tsgt 2 preheaters Soldering module (nitrogen) Outlet and additional roller conveyor for soldering frame 6 soldering frames Two crucibles (one overhauled) Various spare parts

Condition: used, Year of construction: 2012, Operational condition! Cgjb E Iewcrvpehf Tot Ask for additional information!

Condition: used, Year of construction: 2021, Machines in operational condition! Ask for additional information! Ceb E Ihjwcrthjf Tjgt

Year of construction: 2019, Condition: used, Operational condition. Ceb Eswcghys Ihf Togt Ask for additional information!

Condition: used, Year of construction: 2023, The POWERFLOW ULTRA is the innovation in the wave soldering product portfolio of Ersa GmbH. This full-tunnel wave soldering machine meets current and future flexibility and throughput requirements. The machine is available with both frame and finger transport. Working widths from 330 to 610 mm (XXL version) are possible. It can also be used to solder server boards for 5G communication. Cob Eowcgf Ss Ihf Tsgt Ask for additional information!

Condition: used, Year of construction: 2018, Operational condition machine! Total of 2 machines available 2014 and 2018 vintage. Cgsb E Ihfswcgd Ue Tst Ask for additional information!

Year of construction: 2023, Condition: used, Average placement speed: 1,9 s/component with a 400 mm pick&place cycle using radial components. Min. PCB size L x W: 55x55 mm Max. PCB size L x W: 580x400 mm, Max PCB length with 3-segmented conveyor: 480mm Operational machine!  Csb E Ihfjwcf Urj Togt Feeders also available of model RTF 60. Ask for additional information!

Condition: used, Year of construction: 2006, -Spray fluxer -2x medium-wave preheating cassettes -1x dynamic preheater -1x bottom convection preheater -Dual wave with chip pre-nozzle + ERSA Power Wave - Cooling unit at the outfeed -Synchronous code reading system upstream of the soldering system -Roller buffer at the outfeed Cob Eowcf Raj Ihf Tsgt -Motor-driven infeed conveyor with chain Ask for additional information.