CNC universal milling machine console

KLOPP FWS15

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Dodpfxjzbqqus Adhscn Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Dedpfoyzim Asx Adhjcn Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters Dodpfxovcb U As Adhecn - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Condition: excellent (used), 3-phase DC spot welding machine DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Dcsdpohmvawefx Adhsn Arm reach: 550 mm with mounting control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Weight: 740 kg

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Dcodpfoyft S Asx Adhsn Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Djdpfx Asydpxvsdhscn Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: Dcodpjwzbq Tefx Adhen - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM Dcjdpfxewtd Dyo Adhjn FIDIA Control Power Draw Bar LOVO Light Coolant

Year of construction: 2023, condition: new, Boiler capacity: 270 l Dcjdpfxohmi Nqe Adhsn Flow rate: 680 l/min Motor power: 5.5 kW

Condition: used, Field of view on the objective lens at 50x: 11.2 x 9.2 mm Dcodpfx Ajb Nxl Iodhen Field of view on the objective lens at 100x: 5.6 x 4.6 mm Projection area: 560 x 460 mm Objective table size: 230 x 165 mm Diameter of the glass table: 80 mm Approximate weight: 230 kg Space requirement: 1030 x 780 x 1800 mm