Used material testing for sale (505)

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. Isdszlccispfx Akpjbb The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Year of construction: 2020, condition: used, Two identical QAVERtec testing and measuring machines for quality control of freshly produced concrete products are offered. Facing/core porosity measuring range: 0%-100%, porosity resolution: 1%, height measuring range: 35mm-130mm, height measurement resolution: 0.1mm, weighing range: 0kg-25kg, scale resolution: 0.01kg, density determination: calculation of bulk density, max. vacuum: 900mbar, tolerance: +/-2%, working radius: 5m, PC unit: CX5130-0175, operating system: Windows 10, display: 19 inches. Machine dimensions X/Y/Z: 1550mm/1150mm/530mm, weight: 120kg. Documentation available. Inspection by arrangement is possible. Iodpfx Ajzxhlcokpsbb

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% Ijdpjzu Nxiefx Akpebb - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2005, condition: refurbished (used), We are offering this ZwickRoell 1484 200KN tensile and compression testing machine, manufactured in 2005, which has undergone a complete overhaul. Manufacturer: ZwickRoell Model: 1484 Year of manufacture: 2005 Condition: refurbished Category ID: 407 Machine type: 200KN tensile and compression testing machine Types of tests: Tensile and/or compression Testing space: 2, top and bottom Capacity: 200KN Accessories: Included, in particular the mechanical grips Ibodpfjzw N Hlex Akpeb The machine will be equipped with a new control cabinet with DOLI technology and testing software compliant with ISO 6892-1. If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2008, operating hours: 470 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Yxlon MU 2000, Yxlon MU 2000 type industrial X-ray screening equipment with 160 KV output: The system were totally refurbished in 2020. The flat panel and all of the axiscontrol electromotors were also replaced!!! The stained glass viewing window with a safety lock can be opened with two hands and the workpieces can be inserted without stopping the radiation! The workpieces can be moved using a five-axis manipulator. The movement can be programmed, which speeds up the work and makes the evaluation more accurate. However, it is also possible to move it manually for inspection! Size and weight of the workpieces: - Diameter: 400 mm Length: 900 mm Weight: 60 kg - Cabinet dimensions: 2200 x 2700 x 1800 mm - Weight: 4000 kg - Computer control The machine automatically moves the inspection table and the tilt angle and height of the C-arm according to the program compiled on the basis of the parameters of the places to be tested, so that the number of testable pieces can be significantly increased in the case of serial tests. Several components Iedpfx Aju Hzvxekpjbb can be loaded into the cabin at the same time, and the machine examines them one by one according according to the programming. MG 165 x-ray device Y.TU-160 D 06 metal-ceramic X-ray tube, for detecting small defects in steel or aluminum castings, parts - Focus size: 1.0/0.4 mm - Test voltage: 8-160 kV, 1.00/0.64 kW power - Closed system water cooling WL3002 - Translucent material thickness: steel 35 mm, / aluminum 45 mm XRD Flat Panel - 200 x 200 mm active area - 512 x 512/400 μm/30fps or 1024×1024 pixels/200μm/15fps resolution - Special frame grabber - Y.T24.CD01, 24″, 1920×1200 pixels, color TFT monitor - Load capacity: 160 kV Control panel - MGC 41 control panel - Manipulator control (joystick) - Door control, push buttons /two-handed/ - Image processing control - digital image processing software - Image archiving - Image captioning - Image comparison with a reference image - zoom function - blackout control - Fast video card + frame grabber + evaluation PC - Measurement and calibration functions - Windows operating system - DICONDE data format

Condition: excellent (used), Walter+Bai LFV100-HH Servo-hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including the PAC-40 hydraulic unit, PCS8000 digital controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial manufacturing. The original Walter+Bai testing software, the associated software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K29788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Control System: Ibodpfxezlz Rxs Akpeb Walter+Bai PCS8000 Digital Controller Digital Testing Machine Control System Original Walter+Bai Testing Software Available Original Software Dongle Available Industrial PC Included in Scope of Delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic Hydraulic Unit Water-cooled Version Designed for Continuous Operation PCS8000 Digital Controller Mounted Dimensions: Testing Machine (W × D × H): approx. 1,200 × 1,245 × 3,378 mm Hydraulic Unit PAC-40 (W × D × H): approx. 800 × 1,250 × 1,650 mm Weight: Testing Machine: approx. 2,500 kg Hydraulic Unit PAC-40: approx. 980 kg Clamping System: 2 × Mechanical Wedge Grips Walter+Bai WGR-100-M Several Sets of Gripping Jaws Clamping and Mounting Accessories as Shown in Pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Several Sets of Gripping Jaws Handheld Control Unit Separate Control Unit with Emergency Stop Testing and Mounting Accessories as Shown in Pictures Condition: Used Year of Manufacture 2019 Optical Condition as Shown in Pictures Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Sets of Gripping Jaws Handheld Control Unit Control Unit Other Accessories as Shown in Pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Year of construction: 2011, condition: used, The LECO TC-400 ON analyzer is a highly precise laboratory instrument for determining the oxygen and nitrogen content in solid samples. This system is typically used in metallurgy, materials testing, research, and quality assurance, providing reliable elemental analysis for a wide range of inorganic materials. The TC-400 operates as an inert gas fusion analyzer (ON/O-N analysis) and enables: Determination of oxygen (O) and nitrogen (N) in solid samples Analysis of metals, alloys, ceramics, and powder materials Highly precise measurement through fusion extraction in a graphite crucible Automated sample loading (depending on the configuration) Evaluation via integrated analysis software Repeatable results for quality and process control Documentation and data management via TCWin Analysis Software (Version 4.24) Thanks to its robust LECO technology, the TC-400 offers stable performance, high measurement accuracy, and a proven analytical platform for demanding applications in research and industry. Ibsdpfx Akszkaa Aepob

Condition: excellent (used), DEWETRON DEWE3-PA8-RM Power Analyzer Manufacturer: DEWETRON System: DEWE3-PA8-RM Chassis Type Plate: DEWE3-RM8 Revision: 1.1 Device Type: High-End Power Analyzer Design: Stationary 19" Rack-Mount Power Analyzer Country of Manufacture: Austria For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design, with a built-in TRION3-1810M-PA power module, as well as the connection and measurement accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measurement channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measurement range power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to type plate: 500 W Sensor supply: Integrated redundant sensor supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Equipment: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current / measuring channels I1–I4 CNT1 / CNT2 TRIG DC / AUX / Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ibjdpfszyl Sisx Akpeb Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Research and development Dimensions: Dimensions: 442 x 435 x 222 mm Weight: 15.8 kg Condition: Used Device can be switched on. Optical condition as shown in the pictures. Scope of supply: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x built-in TRION3-1810M-PA power module Measurement, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, scope of supply as shown in the pictures Shipping via UPS freight possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tools from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident lighting via LED ring light; 4 sectors and 1 ring individually switchable Precision measuring stage (X and Y axes) Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow toggle Camera-based measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and handy – high performance Rapid operation with maximum measurement precision Special features Ijdpfx Aezpwd Nekpsbb Incl. Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels particularly with stamped parts, plastic and rubber components, milled parts, tools, profiles, and PCBs. Key highlights of the measuring microscope include camera-based measurement data acquisition, rapid operation, and high precision. Another notable feature is the precise edge detection in transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and handy, measuring 900 mm × 950 mm × 950 mm. Please feel free to contact us if you have any further questions!

Condition: like new (used), Year of construction: 2025, Device from 2025, like new. Two-year warranty on spare parts. The Binder KB 240 E6 is a professional refrigerated laboratory incubator with a compressor unit, designed for microorganism cultivation, stability studies, material testing, and sample storage at controlled temperatures. The E6 model, using R-134a refrigerant, is one of the most highly regarded generations in the KB series thanks to its excellent cooling performance and wide temperature range. Key features: * Temperature range: -10°C to +100°C * Chamber volume: approximately 247 liters * Compressor-based cooling * BINDER E6 controller with time programming * APT.line™ technology ensuring uniform temperature distribution * Inner doors made of tempered glass * Stainless steel chamber * 30 mm access port * RS422 interface / compatible with APT-COM™ Applications: * Incubation of microorganisms * Biological and pharmaceutical research * Stability testing * Sample storage * Material testing * Temperature simulation Technical specifications: * Capacity: approx. 247 L * Maximum temperature: 100°C * Power supply: 200–230 V Iedpfx Aksy R Tz Aopsbb * Power rating: approx. 1.2 kW Benefits of the KB E6 series: * Excellent temperature stability * Effective cooling below ambient temperature * High reliability * More energy-efficient than previous generations * Suitable for continuous operation in laboratories * Popular model for pharmaceutical and microbiological labs

Condition: good (used), UNHOLTZ-DICKIE / HS-Simulators Vibration Test System Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulators Horstmann GmbH Type: TA117SA-560 + HS 520 K 60 V For sale is a complete electrodynamic vibration test system consisting of an UNHOLTZ-DICKIE shaker, model 560, a SALL50F power amplifier, a VWIN II control/regulation system, and an HS-Simulators climate test chamber, HS 520 K 60 V. Suitable for vibration and shock tests, as well as combined vibration, temperature, and environmental simulation tests. Technical Data Shaker: Model: 560 System: TA117SA-560 Design: Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. acceleration of free table: 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonance frequency: approx. 2200 Hz / 2.2 kHz Armature effective weight: 45 lb / approx. 20.4 kg Driver coil: 200 A Sine / 140 A Random Cooling: Air Power Amplifier: Type: SALL50F Power Amplifier Power Module: PML-50-S Master Controller: MCLL50 Supply: 400 V / 3 phases / 50 Hz Amplifier / Field supply: 41 kVA / 60 A Shaker blower: 15 kVA / 22 A Total system: 56 kVA / 82 A Max. driver current: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Control / Regulation: VWIN II DSP Vibration Control System Control Console: MA117SA-560 Charge Amplifier: Type 122P DSP-based real-time control 4 input channels, expandable to 8 or 16 2 output channels Interfaces: TCP/IP, RS232, USB, Ethernet, Digital I/O Test types according to documentation: Random Vibration, Sine Vibration, Resonance Dwell, Classical Shock Pulse, SRS Shock & Analysis, Sine-on-Random, Random-on-Random, Gunfire, Long Time History Control, Signal Analyzer / Transient Capture HS-Simulators Climate Test Chamber: Type: HS 520 K 60 V Year of construction: 1988 Temperature range: -60 °C to +180 °C Connection: 380 V / 17 A / 10 kW Refrigerant according to nameplate: R13 / R502 Dimensions: Power Amplifier: approx. 537 x 825 x 1000 mm (W x D x H) Climate test chamber: approx. 1200 x 1800 x 2000 mm (W x D x H) Estimated total weight of the system offered, excluding separate control cabinet: approx. 2,200 – 2,800 kg Shipping dimensions and actual shipping weight will be determined separately for the shipping inquiry. Equipment / Scope of delivery: UNHOLTZ-DICKIE shaker, model 560 SALL50F power amplifier VWIN II control/regulation system Control Console Charge Amplifier Shaker blower HS-Simulators climate test chamber HS 520 K 60 V Industrial PC / Monitor Original system documentation and accessories as described Condition: Used Industrial system from commercial use. Optical condition as shown in the pictures. Functionality not fully tested. Inspection is possible and desired after prior appointment. Transport only by a suitable freight forwarder. Isdpfxey S S Eij Akpjbb Loading and collection possible by arrangement. Subject to changes, errors and prior sale.

Condition: like new (used), Ishida x-ray machine is in great condition. It's hardly been used. It has come direct from a major food manufacture. Ijdpfx Aey A Rh Rjkpsbb

Condition: used, Universal Shaker accessory kit / adapter plates / expander plates Professional accessory kit for electrodynamic shakers and vibration test benches For sale is a comprehensive used accessory kit for electrodynamic shakers or vibration test benches. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, and additional adapter and clamping components for professional use in vibration and shock testing. These components are ideally suited for test specimen mounting, special fixtures, and custom adapter designs in the field of material testing, environmental simulation, and research and development. Technical data Manufacturer: unknown Type: Accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components • 1 expander plate, approx. 770 × 770 mm Weight: approx. 90 kg • 2 adapter plates, approx. 770 × 770 mm Weights: approx. 45 kg and approx. 40 kg • 1 adapter plate, approx. 770 × 770 mm Weight: approx. 35 kg • 1 adapter plate with circular cutouts Weight: approx. 25 kg • 1 round adapter plate Weight: approx. 20 kg • 1 clamping rail / linear adapter Weight: approx. 25 kg • 1 precision adapter block Weight: approx. 3.06 kg • 1 steel adapter plate Weight: approx. 2.18 kg • Additional adapter and fastening parts as shown in the images Features Solid aluminum constructions Reinforced expander plate with central mounting Precision-manufactured adapter plates Bore and thread grid for flexible test specimen mounting Adapter plates in various sizes Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Iodpezp D Tkefx Akpjbb Precision adapter block Additional accessories as shown in the images Application areas Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Fatigue testing Automotive industry Aerospace Research and development Test specimen mounting and special constructions Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Condition Used. Optical condition as shown in the images. Normal wear and tear, scratches, and pressure marks present due to age. Some minor edge damage from previous use. Scope of delivery Complete accessory kit as shown in the images. Expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional adapter and fastening parts as shown in the images. Note: Only the accessories shown in the photos are being sold. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10003426, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Isdpfsyfgzkjx Akpjbb For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Ijdpfoxw N Uvox Akpsbb Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: used, Thermotron AST-18 HALT/HASS Test Chamber Manufacturer: Thermotron Industries Model: AST-18 Controller: AST-8800 Machine Type: HALT/HASS Test Chamber / Accelerated Stress Test System For sale is a Thermotron AST-18 HALT/HASS test system for combined temperature and repetitive shock/vibration testing. The system enables accelerated stress testing of components and assemblies through extreme temperature changes in combination with multi-axis vibration excitation. Operation and monitoring are performed via the Thermotron AST-8800 controller. Technical Data: Temperature Range: -100 to +200 °C Temperature Change Rate: >50 °C/min at the test specimen Vibration Frequency: 0 to >10,000 Hz Vibration Axes: 3 linear + 3 rotational / 6 degrees of freedom Max. Payload Test Table: 135 kg Airflow Rate: 1,400 CFM / approx. 2,379 m³/h Grid Dimension: approx. 102 × 102 mm Voltage Supply: 400 V / 3 Ph / 50 Hz Max. Current according to Nameplate: 65.3 A Heating Power according to Nameplate: 20 kW AST-8800 Controller: Windows-based user interface Combined temperature and vibration display PSD / Power Spectral Density Data recording and data storage Vibration alarm and shutdown limits Ethernet / Web access User management Monitoring of operating and maintenance times Test Chamber: W × D × H: approx. 838 × 864 × 762 mm Test Chamber Volume: approx. 0.55 m³ / 550 liters Vibration Table: Manufacturer's table size depending on the configuration: approx. 610 × 610 to 711 × 711 mm Ibedpfxjzyndbs Akpjb Impactors: 4 or 5, depending on the design Dimensions: Move-In Dimensions W × D × H: approx. 2,286 × 1,448 × 2,210 mm Footprint: approx. 2.29 × 1.45 m Equipment: Thermotron AST-8800 controller Repetitive shock/vibration table Temperature test chamber Acceleration sensors Temperature measurement technology Safety and monitoring functions Condition: Used Optical condition as shown in the pictures. Calibration valid until 30.11.2024, currently expired. Scope of Delivery: Thermotron AST-18 HALT/HASS test system AST-8800 controller RS-28 unit Scope of delivery and accessories as shown in the pictures. Shipping Data: Dimensions: approx. 2,286 × 1,448 × 2,210 mm Weight: approx. 1,000 kg (estimated) Shipping via freight forwarder possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: good (used), Weiss SC/KWT 450 Salt Spray Chamber / Corrosion Test Cabinet Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Machine type: Salt spray chamber / Corrosion test cabinet Size: 450 l For sale is a used Weiss SC/KWT 450 salt spray test chamber for corrosion, material, coating, and quality testing. The system features a programmable control unit, brine supply, compressed air treatment, as well as connections for demineralized water and exhaust air. Technical data: Test chamber volume: approx. 360 l Brine tank: approx. 180 l Test chamber (H x W x D): approx. 740 x 850 x 570 mm Max. test specimen weight: 100 kg Max. load per rod: 8 kg Electrical data: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Supply data: Compressed air consumption: approx. 1.5 Nm³/h Brine consumption: approx. 0.5–1 l/h Demineralized water consumption: approx. 0.4 l/h Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust and brine drain Original operating/service manuals Ijdpfxjzzzpgj Akpsbb Accessories as shown in the pictures Dimensions / Shipping data: External dimensions (L x W x H): approx. 1,930 x 800 x 920 mm Weight (empty): approx. 140 kg Shipping by freight forwarder possible Condition: Used – Year of manufacture 2001 Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of supply: Weiss SC/KWT 450 salt spray chamber Sample holders as shown in the pictures Original operating/service manuals Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2013, condition: excellent (used), Temperature Test Chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature test chamber from the manufacturer Vötsch. The test chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Equipment type: Temperature test chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 5 K/min Temperature change rate (cooling): approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Refrigerant quantity: 1.30 kg ND max.: 18 bar g Ibsdpfx Akozv S Hfepeb HD max.: 25 bar g Cooling water consumption under full load at Temperature difference Dt = 10 K: 2.2 m3/h Temperature difference Dt = 5 K: 4.4 m3/h Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.6 kW Rated current: 32 A Features Touch panel operation Interior made of stainless steel Side access ports Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature test chamber Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Year of construction: 2018, condition: excellent (used), VÖTSCH ClimeEvent C/340/70/5/S Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2018 Machine Type: Climate Test Chamber / Temperature and Humidity Test Chamber Test Chamber Volume: approx. 340 liters For sale is a used VÖTSCH ClimeEvent C/340/70/5/S climate and temperature test chamber with three side-mounted, telescopically extendable test drawers. The test chamber was developed for professional temperature, climate, humidity, aging, and stress tests and is ideal for testing laboratories, the automotive and electronics industries, research institutions, and quality assurance. Technical data: Model: ClimeEvent C/340/70/5/S Test chamber volume: approx. 340 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: approx. 5 K/min Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Refrigerant: R449A Refrigerant quantity R449A: 2.50 kg Additional refrigerant: R23 Refrigerant quantity R23: 0.75 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Static pressure R23: 13 bar g Test drawers: 3 telescopically extendable test drawers Stainless steel grid baskets for holding test specimens Separately lockable, insulated drawer fronts Heated drawer openings Individual test levels accessible separately Suitable for holding several small components and assemblies Dimensions: External dimensions (H × W × D): approx. 1,800 × 895 × 1,810 mm Test chamber dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: WEBSeason touch operating panel Digital measurement and control system Temperature and humidity control 3 telescopic test drawers Stainless steel grid inserts Observation window Side cable and test specimen openings Donaldson Ultrafilter compressed air treatment S!MPATI software license Calibration certificate Quality test certificate EU declaration of conformity Documentation / operating manual Iedpfx Akozp Inrepebb Accessories as shown in the pictures Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics and component testing Aging and stress testing Automotive industry Research and development Quality assurance Transport data: Transport dimensions (H × W × D): approx. 1,800 × 895 × 1,810 mm Electrical connection: 400 V / 50 Hz / 20 A Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: VÖTSCH ClimeEvent C/340/70/5/S climate test chamber 3 telescopic test drawers with grid inserts Donaldson Ultrafilter S!MPATI software documents Calibration and quality documentation Operating manual / technical documentation Accessories as shown in the pictures Shipping or freight shipping possible. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Iedpozn I N Hofx Akpjbb Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Ibodezpy Idepfx Akpsb Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: like new (used), Hardy Type: Hardy TH453-W2E-II Never used (exhibition piece) Water-cooled Here we offer an unused Hardy duplex climate chamber for temperature and humidity testing. The system has two test chambers arranged in a common housing. Both test chambers can be operated independently. This allows two different tests to be carried out simultaneously. The climate chamber is prepared for testing with lithium-ion batteries and is particularly suitable for batteries from power tools, e-bikes, and comparable applications. Technical data Number of test chambers: 2 Operation of the test chambers: independently of each other Test chamber volume: approx. 300 liters per test chamber Test chamber dimensions per test chamber: 850 × 600 × 600 mm, width × depth × height External dimensions: 1,150 × 2,115 × 1,922 mm, width × depth × height Temperature range: -45°C to +100°C Temperature deviation: ±0.5°C Temperature change according to data sheet: Heating rate ≥ 2°C from +25°C to +100°C, empty and non-linear Cooling rate ≥ 2°C from +25°C to -45°C, empty and non-linear Humidity range: 20% RH to 98% RH Ibedpfjzv Rrmsx Akpob Temperature range during humidity operation: +20°C to +85°C Condition: New Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P.0020001424, X-Ray Yxlon international MU231 - fully functional (2003) Fully automatic, 100% x-ray inspection of alloy wheels using YXLON's Y.AI/Rel.9 ADR program reaches a cycle time below 25 seconds per wheel. The automatic defect. Fully functional X-Ray for alu wheels. Possible alu wheels from size 12 to 19. Machine is fully working, perfect condition. During 2025 full repas was done - all issues are now sorted (tested). Software is unlocked. New owner can test the machine before purchase (Central Bohemia). Machine label attached. Price: 49.000 EUR excl. VAT (price does not include transport and duties) Invoice will be issued in EUR from Czech company. Iedex Hqnrjpfx Akpjbb When you will have any questions, do not hesitate to contact us - e-mail / WhatsApp / call Lead cabin (1) with shuttles (2) for the transport of wheels in/out the cabin Decollators to get single wheels for transportation in the cabin X-ray tube (3), Image Intensifier (4), High-voltage generator, X-ray control unit (5) Industrial PC (6) (with mechanical positions and X-ray parameters for every wheel type) Control cabinet with PLC (7) Wheel manipulator (8) (Rotation and linear movement of wheels) X-ray-manipulator (9) (tilt axis with X-ray tube and Image intensifier) Vision System for wheel type recognition Image-Processing Unit (Host PC with Slave PCs) Output conveyor (10) e.g. with an alterable switch (for accepted wheels / rejects)

Condition: good (used), OMAG / AFFRI 903 RSD Hardness Tester Ibsdozni D Eepfx Akpeb Professional stationary benchtop hardness tester from the renowned Italian manufacturer OMAG di AFFRI DAVIDE s.r.l. (Model 903 RSD). The unit has been regularly inspected and certified by the DAkkS-accredited laboratory 3-Rath Kalibrier + Prüftechnik (most recent inspection on April 28, 2025, for the HRC method in accordance with DIN EN ISO 9000ff). Technical Data: Manufacturer: OMAG / AFFRI Group (Italy) Model: 903 RSD Serial Number: 76599 Test Method: Rockwell (calibrated for HRC, among others) Voltage: 115 – 230 V Weight / Test Force: 195 kgf Special Feature: Height-adjustable test head for flexible workpiece sizes "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), We are offering a Weiss climate test chamber with humidity control! The chamber was serviced by Weiss/Vötsch as recently as December 2020. All tests were performed, and we conducted an additional test run on-site; humidity and temperature levels were verified using calibrated instruments. The chamber has undergone annual inspections and is in impeccable condition! The logbook is included. WEISS 1500SB/010JU/40DU Iodpfx Aszn U A Tekpebb Temperature range: -40°C to +180°C Humidity: 15% to 95% Climate operation: +10°C to +95°C Test chamber volume: 1,500 liters Internal dimensions: 1,490 mm deep, 1,100 mm wide, 945 mm high External dimensions: 2,470 mm wide, 2,000 mm high, 1,450 mm deep Weight: approx. 1,100 kg Refrigerant: R404a (2.00 kg) The unit does not have feet and stands securely on a frame. Please feel free to contact us if you have any further questions!