Used magnet drilling machines for sale (14)

Condition: new, machine/vehicle number: 37 R9633-2, Drill-Ø with twist drill up to: 13 mm Drill-Ø with crown drill up to: 35 mm Cjdpfx Asc N T Hrjcvjgr drilling stroke: 115 mm drive power: 680 W electrical connection: 220/240 V magnetic base dimensions: 92 x 172 mm weight: 13 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1595 € 23 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 500 mm 17 kg Cgodpfx Asyrht Iscvjr 23 mm 50 mm 75 mm 190 mm 160 - 250 / 390 - 580 U/min 8 mm The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base (ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash Settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”)Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 6 mm hex wrench • 5 mm hex wrench with a handle • 2.5 mm hex wrench • 8 mm combination wrench • Tool can • Operator’s Manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 lt Vacuumpad Compressed air ecjector Pipe attachement

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Codpfx Aeyrhtnocvegr Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1995 € 25 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 505 mm 18 kg 25 mm 70 mm 75 mm 190 mm 120-190 / 290-450 U/min 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT3 arbor with 19 mm (3/4”) Weldon tool holder Csdpfx Aeyrhrwscvogr • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 5 mm hex wrench with a handle • 4 mm hex wrench • 2.5 mm hex wrench • 8 mm combination wrench • Operator’s Manual OPTIONS (PREISE AUF ANFRAGE): Pressure cooling system Pipe adjustment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW 316 mm 235 mm 328 mm 115 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Standard shipping set: • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) Cgjdpfx Aeyrhqtjcver • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 595 € 12 mm 19 mm Weldon 0.1 kW 175 mm 250 mm 312 mm 10 kg 12 mm 36 mm 51 mm 70 mm 350 U/min The PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameter by means of twist drill bits with Weldon shank 19mm (3/4’’). Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers. Features & benefits: Cgjdsyrhqmjpfx Acvjr • Dual bars guide system ensures extraordinary stiffness and adjustment free operation • Compact size and ultra-lightweight - ideal for site work • Rugged one piece slide and gear box for extra stability • Purpose designed motor with heavy duty gear box • Maintenance-friendly design makes it easy to use • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and theoperator from work on too thin work piece Standard shipping set: • Magnetic Base Drilling Machine • Plastic Box • Swarf Shield/Cutter Guard • Coolant Bottle Assembly • Safety Chain with Snap Hook • Allen wrench hex s=4 • Operator’s Manual • Standard shipping weight - 16,7 kg (36 lbs OPTIONS (PRICES ON REQUEST): Coolant system 2 lt Vacuumpad Compressed air ejector Pipe attachment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 995 € 23 mm 19 mm Weldon 1.15 kW 331 mm 254 mm 456 mm 155 kg 23 mm 50 mm 50 mm Csdeyrhp Nopfx Acvsgr 160 mm 240 / 480 U/min 6 mm PRO-50 featuring purpose designed motor and 2-speed gear box 240/480 rpm is optimized to provide appropriate speed for work with HSS cutters up to ? 45 mm and twist drills up to ? 23 mm. Rigid construction, optimized by means of FEA (finite element analysis) software extends tool life and enables depth of cut up to 75 mm. Compact design along with innovative smart magnet with reduced weight make it a lightweight machine. PRO-50 provides maximum holding power on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill protects both the machine and the operator from work on too thin work piece by means of Magnetic Power Adhesion Control (MPAC). PRO-50 is also equipped with Energy Saving Base (ESB) that uses only 50% of its power when motor is not running. Features and benefits: • Compact design with excellent ratio weight/power • Purpose designed motor • Motor Speeds 240/480 rpm (under load) • Spindle equipped with MT2 • Innovative smart magnet with reduced weight • Rigid design to extend tool life • Large stroke enables the use of long tools • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and the operator from work on too thin work piece • Energy Saving Base (ESB) uses only 50% of its power when motor is not running Standard shipping set: • Drilling machine • Plastic box • Handle (3pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling system hose • MT2 drift • 2.5 mm hex wrench • 5 mm hex wrench • 5 mm hex wrench with a handle • 8 mm combination wrench • Operator’s manual OPTIONS (PRICES ON REQUEST): Pipe adjustment Pressure cooling system Vacuumpad Vackuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1055 € 12 mm 19 mm Weldon 1.1 kW 400 mm 126 mm 185 mm 10 kg 12 mm 40 mm 40 mm 45 mm 370 U/min 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank. Features&benefits: • Low profile mag drill of 185 mm height only • Ultra-strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design of just 10 kg • Milling capacity up to 40 mm with annular cutters • Accepts also twist drills with 19,05 mm (3/4”) Weldon shank • Extended stroke of 45 mm allows up to 40mm depth of cut • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Integrated swarf guard • Detachable feed lever (feat. ratchet) can be fixed from either side • Lifting handle for easy transportation • Cooling with a bottle Standard set includes: • Drilling machine • Plastic box • Handle • Pilot pin 6.34 x 102 mm for HSS cutters • Pilot pin 7.98 x 103 mm for TCT cutters • Safety strap • Hex wrench 4 mm • Operator’s Manual Cgjdpfx Aoyrhp Ajcver OPTIONS (PRICES ON REQUEST): Cutter extension Coolant bottle with nozzle 250ml

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Cjdpfx Acjyrhppevegr Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz Cgedpefc R D Asfx Acver -Dimensions: 700/300/H670 mm -Weight: 49 kg

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Cedpfx Aeulc Tuecvogr

Condition: new, functionality: fully functional, overall weight: 32 kg, input voltage: 230 V, Automatic internal lubrication – coolant is supplied directly to the core drill, increasing tool life and work quality STEPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined Morse taper MK4, enabling the installation of various tools such as twist drills, countersinks, reamers, tap holders, or hole saws Powerful high-torque motor with soft start and overload protection ensures reliable operation Strong electromagnet securely holds the machine in place during operation Csdpjyt I Uuofx Acvsgr Ergonomic control panel enables quick and intuitive setting of work parameters Robust machine construction increases stability and minimizes vibrations during machining Wide range of applications – ideal for industrial, workshop, and service use Technical specifications: Drilling diameter (core bit): 100 mm Drilling depth (core bit): 100 mm Drilling diameter (twist drill): 38 mm Spindle stroke adjustment: 275 mm Maximum threading capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed settings – number of gears / stepless: 1. 50–110 / 2. 20–200 / 3. 200–500 / 4. 320–800 Spindle taper: MK4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. plate: 165 mm Magnet holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2,580 W Voltage: 230 V Dimensions – width: 330 mm Dimensions – depth: 430 mm Dimensions – height: 830 mm Weight approx.: 31.5 kg

Condition: new, Boring power 35 mm turning speeds max. 810 U/min core drilling diameter max. 35 mm tool taper Weldon 19,05 mm bore stroke 210 mm weight 11 kg connected load frequency 230 V engine output 1,6 kW Dimensions (LxWxH) 0,4 x 0,25 x 0,275 m Cgsdpsidabvjfx Acvjr Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg

Year of construction: 1989, condition: good (used), machine/vehicle number: P28979, Magnetic drilling machine with safety transformer Offer 20427 Technical data: - drilling capacity approx. 32 mm - Drilling spindle mount MK 3 Cjdpfogzhnijx Acvsgr - throat 70 mm - stroke approx. 175 mm - 8 speeds approx. 10 - 420 rpm - drive 42 V / 960 Watt - magnetic base 100 x 220 mm - magnetic base left + right swivelling drilling machine carrier - Space requirement approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer - isolating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space requirement approx. W 300 x H 350 x D 350 mm - Weight 27 Kg