Used Hand Tapping Machine for sale (69,529)

Condition: good (used), Year of construction: 1989, Offered from an insolvency is a ready to use tapping machine Manufacturer Fleet Pjdpfxjfm S Nae Acvogi Model SB 15 GL year of manufacture 1989 Machine No. 34177063 Technical data: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Throat 200mm Chucks Bilz WFP 1 + inserts drill chuck Röhm 0-10mm Foot switch Digital display Pinol stroke Single continuous cycle Emergency stop Speeds from 80-3150 rpm 380 volts Engine power 0,75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs. Lead screw --pitches-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions weight approx. 200kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Hydraulic Thread Cutting Machine / Tapping Arm from CMA Model RHR(M) 30 D+ (demonstration unit) Technical Data: Year of manufacture: 2025 Speed: ÷125 + ÷500 RPM Torque: 255 + 64 Nm Mount: 2/Ø31 Radius: 1800 mm Capacity: M4–M30 (steel) Weight: 290 kg • Articulated arm technology: Effortless positioning of the tool above the workpiece. • Operator relief: Absorption of reaction torque protects the operator. Podpeyq Hf Tjfx Acvjgi • Quick-change system: Tool-free change of threading inserts with slip clutch. • Reduced tool breakage: High stability and precise guidance prevent tap breakage. • Increased efficiency: Significantly faster processing times compared to manual methods or large machining centers.

Condition: used, Measuring and marking plate cast steel gray cast iron heavily ribbed STIEFELMAYER from a measuring or scribing machine with hand-guided measuring arm Machine. No. 8530979 Year of construction approx. 1989 length 3000 mm Podpfsdzqpzex Acvogi Width 1500 mm Thickness 360 mm Working height 690 mm panel thickness 70 mm throughout - surface machined laterally at a 90° angle 3000 x 360 mm - 6 height-adjustable feet - plus 1 measuring arm, mechanical and electrical without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mm space requirement L x W x H 3000 x 2000 x 2500 mm weight approx. 5000 kg very good surface

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Pgsdpfx Aodzqccscvji Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius Podpfx Aewhf Hfocvogi 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition Psdjdzqa Hepfx Acvjgi

Condition: not inspected (used), functionality: unexamined, overall weight: 250 kg, spindle speed (max.): 3,200 rpm, table length: 230 mm, table width: 230 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 1,450 rpm Spindle speed: 500–3,200 rpm Table dimensions: 230 x 230 mm MACHINE DETAILS Operating voltage: 220/380 V Rated current: 4.7/2.7 A Connected load: 1.1 kW Dimensions & weight Dimensions (L x W x H): 700 x 650 x 1,900 mm Weight: 250 kg External reference: Lot 20 /Koch Pgedpsym T Tisfx Acvei

Condition: new, thread dia. M3 - M16 metrisch 250 U/min. 0 6 - 8 bar Podshiptgepfx Acvsgi working area max. 1100 mm weight 15 kg dimensions 700 x 280 x 250 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M16 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB

Condition: excellent (used), Tapping attachment Efem size 4 (28550) Mounting MK 3 Taps from M 10 - M 24 automatic changeover right - left Total length 295 mm Diameter 105 mm Pjdpfx Acouf N S Aovsgi

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: Pgjdpfx Aonyh Tnjcvji - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw Pedpfetnh Alox Acvogi PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: used, Type: RF 1 Machine No.: 2656 Year of manufacture: 1965 Motor power: 1.0 / 1.4 kW Pgodoyq Nnqepfx Acvji Spindle mount: MK 3 with drawbolt thread Table size approx.: 450 x 150 mm Estimated weight approx.: 600 kg Dimensions (W x D x H approx.): 1 x 0.6 x 1.6 m

Condition: excellent (used), Cutting range: M3-M10 in steel M3-M16 in cast iron M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm Includes 1 new tap chuck Pedpjyg Dhwofx Acvegi Everything works smoothly and well.

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier Pjdpfx Acsi Huvhevjgi -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Year of construction: 1970, condition: used, Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine Pgjdpfod E R R Ssx Acvji -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 220 volts -Dimensions: 290/200/H60 mm Pgjdpjd R Nfqsfx Acvei -Weight: 2.1 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Integrated reversing gear with fast reverse Pgsdpecm I T Uofx Acvji -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.3 kg

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Pgedoyah R Nspfx Acvsi Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: good (used), Tapping machine, bench drilling machine Pgjdeb A Imxepfx Acvoi -Spindle mount: B12 -Tap chuck: Tapmatic 30 X M1.5-M7 -Projection: 165 mm -Motor power: 0.25 kW -Weight: 60 kg

Condition: good (used), - Pneumatic motor GAMOR - Reinforced am structure made of hard aluminum (parallelogram) - Table fixing column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900mm - min: 200mm Psdpfx Asydlzyocvsgi - Working air pressure: max: 7 bar - 840 lt/min - Weight: 18 kg Sold without the welding table (as seen in the pictures), only the machine, which can be mounted on a table or similar.

Condition: new, Hydraulic Thread Tapping Machine Manufacturer: CMA Model: RHR 24D Plus Condition: New machine Standard features: - Ball-bearing parallel arm - Hydraulic unit Podsyazfyepfx Acvegi - Digital speed display - Digital depth adjustment - Clamping table 800 x 600 mm (T-slot: 19 mm) - Quick-change chuck - Micro spray system for tool lubrication - Base frame - Operating manual

Condition: good (used), Year of construction: 2003, Offer 25508 High-table tapping and drilling machine with leadscrew Technical data: - Thread tapping capacity: M2 up to M10 - Threads per hour: up to 2400 - Drilling capacity in steel: 18 mm - Drill spindle mount: Morse taper 2 (MK2) - Drilling depth: 100 mm - Threading depth: 60 mm - Spindle to column distance: 215 mm - 4 drill spindle speeds: 320 – 1600 rpm - Table size: 350 x 290 mm - Spindle to table distance: approx. 150 – 520 mm Pjdpfx Aoygk Idscvjgi - Cycle-controlled coolant spray system with pneumatic connection - Drive: 400 V / 0.55 kW - Space requirement: approx. W 580 x H 1430 x D 750 mm - Weight: approx. 150 kg

Condition: ready for operation (used), Wörner AGE 6 bench tapping machine Tapping machine throat depth: 130mm Thread depth: mechanically adjustable Two speeds Foot operation Manual and automatic operation possible. Space requirement: approx. 650mm x 350mm x 750mm ( L x W x H ) Pgedoukq I Dspfx Acvei You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Pgsdpju R S Elefx Acvji Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: new, functionality: fully functional, overall weight: 32 kg, input voltage: 230 V, Automatic internal lubrication – coolant is supplied directly to the core drill, increasing tool life and work quality STEPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined Morse taper MK4, enabling the installation of various tools such as twist drills, countersinks, reamers, tap holders, or hole saws Powerful high-torque motor with soft start and overload protection ensures reliable operation Strong electromagnet securely holds the machine in place during operation Ergonomic control panel enables quick and intuitive setting of work parameters Robust machine construction increases stability and minimizes vibrations during machining Wide range of applications – ideal for industrial, workshop, and service use Technical specifications: Drilling diameter (core bit): 100 mm Drilling depth (core bit): 100 mm Pgedoyt I Uujpfx Acvsi Drilling diameter (twist drill): 38 mm Spindle stroke adjustment: 275 mm Maximum threading capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed settings – number of gears / stepless: 1. 50–110 / 2. 20–200 / 3. 200–500 / 4. 320–800 Spindle taper: MK4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. plate: 165 mm Magnet holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2,580 W Voltage: 230 V Dimensions – width: 330 mm Dimensions – depth: 430 mm Dimensions – height: 830 mm Weight approx.: 31.5 kg