Used machining centers with traverse tables for sale (192)

Condition: new, Year of construction: 2022, axis stroke (X,Y,Z) 6735 x 1930 x 245 mm Number of spindle head vertical 0 St. Number of spindles head horizontal 0 St. Number of tools 39 St. Dust suction hood 2x 250 mm Number of milling agregates 2 St. Year 2022 Hsdpfx Ajxf Dwzoayopa Speed 18.000 / 24.000 U/min. Required air-pressure 7 bar Motor output 16,5 / 19,2 kW Capacity 250 m³/h Control BH660

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain Hpsdpfx Aaovr A A Tjysa - New Z-axis energy chain - Various cables and air hoses replaced.

Condition: good (used), Machining center HOMAG BAZ 723 58/18/FC 4-axis CNC portal machine with 2 moving tables and edge banding unit Hpsdpfx Ajxc Ir Rsaysa

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: AA2/003019, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,780 mm, travel distance Z-axis: 240 mm, number of slots in tool magazine: 10, TECHNICAL DETAILS Condition: Very good condition, little used Postprocessor: Available for Fusion360 CAM Machining size: 3,660 x 2,200 mm X-axis travel: 4,250 mm Y-axis travel: 2,780 mm Z-axis travel: 240 mm Movement speed X-axis rapid traverse: 70 m/min Hjdpfev E Hapex Aayepa Y-axis rapid traverse: 60 m/min Z-axis rapid traverse: 15 m/min Spindle and tool holder Electro-spindle motor power (S1): 8.5 kW Number of tool holders: 10 (without tools) MACHINE DETAILS Dimensions (L x W x H): approx. 7,000 x 6,000 x 2,700 mm Weight: approx. 5,500 kg Safety devices: Light barrier and barrier grid CE certificate: available Vacuum pumps: not included

Condition: used, Year of construction: 2019, Technical details in the attached .pdf document - X axis longitudinal travel 2700 mm - X-axis useful stroke (spindle only – unit A) 1900 mm - Useful stroke X-axis (sander only – unit B) 2050mm - Useful travel X-axis (milling cutter only – C unit) 2050 mm - Useful travel of X-axis (gouge only – D unit) 1500 mm - X-axis useful stroke (blade only – E unit) 1750 mm - Useful stroke X-axis (sander only – F unit) 1500 mm Hpjdpfx Ajxdw D Ejayja - Useful stroke of X-axis with all groups 1500 mm - Y-axis transverse travel 380 mm - V-axis transverse travel 720 mm - Z-axis vertical travel 630 mm - B-axis stroke (electrospindle) +/- 90° - A-axis rotation (divider) infinite - Dimensions: 4000 x 3100 x 2500 mm - Installed power 65 Kw - Compressed air 6 bar - Power supply 380 Volts, 3 / 50 Hz.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 21003600, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, controller model: BWO 910, operating hours of spindle: 200 h, Spindle was rebuilt in 2024 and has only 200 operating hours! Reason for returning the machine: space required for new purchase. TECHNICAL DETAILS X-axis travel: 1,500 mm Y-axis travel: 1,500 mm Z-axis travel: 650 mm (with 130 mm tool length) Table size: 1,500 x 1,500 m Table height: 870 mm Control model: BWO 910 Spindle & cooling Spindle type: High-speed milling spindle HSD Spindle conversion: September 2024 to ES 951 (air-cooled, value: €14,000) Speed (max.): 24,000 rpm Hedpfsv Hnn Djx Aayspa Spindle operating hours: 200 h Tool system Tool holder: ISO 30 + special fastening bolts Number of slots in the tool magazine: 20 MACHINE DETAILS Total length: 5,640 mm Total width: 2,570 mm Total height: 4,200 mm Total weight: 8,500 kg EQUIPMENT - Surface table in tandem version with separate clamping circuits - Drum tool changer:    - X-axis: fixed at X-zero, 4 places for angle heads and special tools    - Y-axis: moving, 10 places, max. D 60 - Milling unit for flexible machining options

Condition: good (used), Year of construction: 2002, Working range X 6,170 mm Working range Y 1,380 mm Hpedpfx Aaer E A U Ieyea Working range Z 155 mm Main motor Kw7.5 kW Max rotation speed 24,000 rpm Aggregate heads 4. axis C-axis tool change positions 10 vertex boring heads 20 Horizontal boring heads X 6 Horizontal boring heads Y 2 Arm structure Work surface Console table Number of bars 10 Positioning aid Vacuum pump capacity 2 x 125m³/h Chip conveyor belt

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: Hpsdsvmywqepfx Aayea - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: new, Year of construction: 2025, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system Hpsdpfjin Ernjx Aaysa - oil mist - any size of the working table

Condition: used, Year of construction: 2008, machine/vehicle number: AP 194 J4, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 700 mm, feed length X-axis: 1,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 600 mm, power of the buffing unit: 7,500 W, 5-axis Balestrini IDEA 2 machining center Axis movement range X -30000 mm Y - 1600 mm Z - 700 mm Working range X -2000 mm Y - 2x500 mm Z - 600 mm Spindle power 7.5 kW possibility of dividing the table into widths 2x Vacuum pump included 4-holder spindle Tool magazine - 4 positions Hpodpfx Ajwrb Tpoayea Enclosed machine roof for dust extraction Windows XP Net price given Dismantling on the customer's side

Condition: used, Year of construction: 2004, functionality: fully functional, spindle motor power: 6,600 W, number of slots in tool magazine: 7, 3 AXIS machine Vacuum pump 100 m3 Electrospindle 6,6 kW motor power Routing unit + Saw aggregate Drilling unit 10 +4 (10 vertical + 4 horizontal) ISO 30 router chuck Manual lubrication Monitor 15" XILOG PLUS Software Hjdpfjwhvwnsx Aayspa Windows XP Machine is still working at Sellers, video of machine in working mode available on request

Condition: ready for operation (used), Brand: Morbidelli Machine no: 6062 Year of manufacture: 1986 Tech. info: Number of spindles: 35 pcs Work table size: 1250x320 mm Spindle center distance: 32 mm Max distance between outer spindle centers: 1088 mm Drilling depth: 70 mm Motors: 2.2 kW, 2.2 kW, 50 Hz, 380 V, 3-phase Motor for raising and lowering: 0.37 kW Size for transport: 150x90x165 cm Weight: 710 kg Hpsdpfx Aaorigrtoyoa Stock no: 2001865BXA

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-Axis Machining Center IMA BIMA 300 Year of Production: 2009 Technical Condition: Very good Technical Data: Hodpfx Aajw R S Dnsyspa * Work Table: 4,300 × 1,250 mm * Supports and Suction Cups: 8 supports, total 24 suction cups * Main Spindle: 7.5 kW (max 11 kW), 1,500–18,000 rpm, HSK-F63 holder, cone diameter 38 mm * Tool Magazine: 18 positions, max tool weight 6 kg, max length 150 mm, tool diameter up to 100 mm (150 mm if adjacent slots are free) * Drilling Unit: IMA 14, 14 vertical spindles, 6 horizontal spindles, grooving saw Ø150 mm, 4,500–6,000 rpm, max drill diameter 35 mm * Tool Set: shank cutter Ø18×43/Ø25/110 mm, grooving saw Ø125/Ø30×4/12Z, drills Ø5–10 mm, HSK-F63 tool holder, tool basket * Vacuum Pumps: 2 × 90 m³/h * Protective Mats: operation in alternating mode, front access * Software: IMAWOP installed on the machine + 1 office license * Emergency Power Supply (UPS): computer power backup approx. 10 minutes * Control Cabinet Air Conditioner: ensures trouble-free operation above 35 °C * Main Spindle Horizontal Unit: cross head with 4 spindles, tool diameter 1–16 mm, speed up to 15,000 rpm * Maximum Feed Rates: X 60 m/min, Y 60 m/min, Z 30 m/min * Dust Extraction: central port Ø250 mm, air speed 28 m/s, according to connection diagram * Weight: approx. 5,500 kg * Compressed Air: connection ¾", pressure 6 bar, dry operation recommended with air dryer * Electrical Installation: main switch in a separate control cabinet; complete control cabinet with monitoring; all safety devices CE-compliant; typical cabinet dimensions: H 2,000 × W 1,200 × D 800 mm; power supply 400/230 V, 50 Hz * Working Environment: permissible ambient temperature +15…+35 °C (without cabinet air conditioner) CNC Control: * System: ICOS OPEN 321 (Polish language version) * Interpolation: simultaneous linear interpolation for 3 axes, 2½D circular interpolation on any two axes * Selected IMAWOP Functions: * Operation selection: drilling, milling, grooves * Graphic updates after corrections * Drilling time optimization * Graphical positioning of suction cups * Conditional and formula-based programming * Technological and tool databases * Alphanumeric names/descriptions up to 28 characters * Subprograms, manual input of machining sequences * Error/alert messages * Acceleration/deceleration control (accuracy 0.001 mm) * Automatic zeroing * Corrections from portable console Additional: IMAWOP machining program

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Hpsdpfjvmpx Rex Aayoa Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: used, Year of construction: 2006, No. 3195 CNC machining center BIESSE Rover C 6.50 CONF.2 Used, year of construction 2006 Machine already disassembled Hpodpfxovn R A Ho Aaysa According to our customer, the machine is fully functional Various workpieces can be processed simultaneously on the machine Working area X 4850/4600 mm Working area Y 1535 mm Power output 228 kW, 39 A Required floor space approx. 8100 x 6500 mm LB Total weight approx. 6800 kg Sale on behalf of customer, ex location Poland, without dismantling, without transportation and assembly Errors in description and price excepted Dismantling, loading and transportation by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2003, machine/vehicle number: AP 133 D3, 5-axis Balestrini IDEA 2 machining center Axis movement range X -1500 mm Y - 1200 mm Z - 700 mm Working range X -100 mm Y - 2x500 mm Z - 600 mm Spindle power 7.5 kW possibility of dividing the table width 2 Vacuum pumps included 4-grip spindle Windows 2000 Hsdpfxowrb Uao Aayopa Net price given Dismantling on the customer's side

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,670 mm, travel distance Y-axis: 1,860 mm, travel distance Z-axis: 350 mm, TECHNICAL DETAILS Table dimensions: 3,670 x 1,860 mm X-axis: 3,670 mm Y-axis: 1,860 mm Z-axis: 350 mm Drilling head: BH 22L Vacuum pump: 3 pieces, 300 m³ Location system: automatic location system Software: updated to Biesse Works Advanced Safety standard: CE safety Hpedpfovwcwbox Aayea

Condition: new, Year of construction: 2023, On stock is a brand new, factory sealed CNC machine Author Morbidelli M90. Suitable for every small or medium sized workshop. For offer + additional specification information, send us a request. TECHNICAL SPECS: - working length: X: 3115 mm - working width: Y: 1320 mm - vector speed X and Y: 56 m/min - machine weight: 3900 Kg - machine length when installed: 5800 mm MACHINE CONFIGURATION: - PRO-SPACE - Drilling head RO.AX F23L - Frequency inverter on drilling head - larger pressure on drilling head - Hiteco 9,5 KW (13HP) - Linear tool changer TRB11 on machine base - Tool changer FAST14 - Laser positioning system for vacuum pods Hodpfxjk H D Eys Aayopa - Tool length measurement device - loading devices (4 pcs) - Vacuum pump Becker 90m3/h - 6x supports TVFLEX - Vacuum pods (145x145mm / H=75mm) - 12 pcs - Vacuum pods (145x55mm / H=75mm) - 6 pcs - EYE-M PRO console - Software SCM Group (Maestro, ProView,…) - Additional key(licence) for Xylog maestro

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, CNC Woodworking Machining Center BACCI Double Jet The machine is fully operational. Possibility to test the machine on-site. Technical Specifications: - Working area X: 2400 mm - Working area Y: 250 mm - Working area Z: 100 mm - Independent Z axes: 2 Hodpfsw Dndrex Aayopa - Number of milling spindles: 2 - Main motor: 7.5 kW - Maximum spindle speed: 18,000 RPM - 5th axis: 5-axis spindle – yes - Machine table: special model - Special material clamping system: designed for chairs - Loading system: magazine - Software: BACCI PITAGORA - CE Certificate: ✔️ - Total connected power: 25 kW - Weight: 6500 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 5,100 mm, travel distance Y-axis: 2,400 mm, workpiece height (max.): 300 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Working area Working area: 5,100 x 2,400 mm Workpiece thickness: 300 mm Spindle and tool changer Electric spindle: 1 x 10 HP HSK Tool magazine: 12 positions, daisy-shaped, on a Z-slide Drill head Vertical spindles (independent): 7 Prepared for horizontal spindle in X-direction: 1 independent spindle with double outlet (prepared) Vacuum Vacuum pumps: 3 Performance per pump: 250 m³/h Hsdpswmczqsfx Aayepa Unloading Unloading system: automatic with steel mesh belt EQUIPMENT - 10 HP HSK electric spindle - 12-position daisy-shaped tool magazine on a Z-slide - Drill head with 7 vertical spindles - Prepared for horizontal X-axis drilling spindle with Double outlet - 3 vacuum pumps, each with 250 m³/h - Automatic unloading system with steel mesh belt - CE safety standard

Year of construction: 1994, condition: ready for operation (used), CNC machine for solid wood processing, Until 07.10.2022 the machine has worked. You can send short video about it. Reason for sale : machine was replaced by new machine Hpodpfx Aajild T Ujyea

Condition: ready for operation (used), Year of construction: 2006, 5 axis CNC machine SCM Record 132 Prisma dedicated for windows and doors production: working dimension: 4400 x 1300 mm Working dimension in Z: 180 mm 5 axis routing unit 15 HP (liquid cooling) automatic tool change 3 x 24 position = 72 position working table with traverse with vacuum cups help unit for heavy pieces pneumatic clamps for door and windows production Hpjdon D Hchopfx Aayja vacuum pump 250 m3/h automatic lubrication conveyor for waste complet documentation

Condition: good (used), Year of construction: 2006, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: AL1/004511, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 25,000 m/min, feed length X-axis: 2,800 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 110 mm, nominal power (apparent): 11 kVA, controller manufacturer: ESA, controller model: KVARA 6, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 110 mm, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, table width: 1,250 mm, table height: 900 mm, table length: 2,750 mm, Working dimension X 2,900 mm Working dimension Y 1,240 mm Working dimension Z 180 mm Number of milling spindles 1 Main motor power 6.6 kW Rotation speed max 18,000 rpm Torque support Tool clamping system HSK-F63 Tool changer positions 8 Vertical drilling spindles 12 Horizontal drilling spindles and X 4 Horizontal drilling spindles and Y 2 Groove saw and X-direction Lock recess milling aggregate double-sided Angular head 0-360+0-90 deg. Vector axis Cantilever machine Machine table Pod and rail table Number of consoles 6 Vacuum pump Number of vacuum pumps 1 Capacity vacuum pump 100 m³/h Safety devices Bumper Interface for .dxf data Control PC control Software Hpjdpfxswh I Nvs Aayea SCM XILOG Conformity marking CE mark

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Hodpfjw Rpd Sox Aayspa Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: excellent (used), Year of construction: 2015, Working range X 6,400 mm Working range Y 1,500 mm Working range Z 1,500 mm Number of milling spindles 1 Main motor Kw 13 kW Max rotation speed 24,000 rpm Tool fixing system HSK-F63 Tool change positions 8 Vertical drilling heads 20 Horizontal drilling tips X 4 Horizontal drilling tips Y 4 N.2 vacuum pumps of 360 m³/h Nesting Remote control Hsdpfx Aaowlcqveyopa BIESSE WORKS software Overall dimensions: 11004×5334 mm Weight 4900 kg