Used Venture for sale (30)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Cedpfx Aj Aggu Ajp Djhd Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer CE marking

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, number of slots in tool magazine: 23, total length: 10,000 mm, total width: 4,100 mm, Equipment: CE marking, documentation/manual, HOMAG BMG 311 Venture 316 XXL – 5-Axis CNC Machining Centre Lightly used and maintained in excellent condition, this HOMAG BMG 311 Venture 316 XXL is almost like new. The machine is equipped with a powerful 5-axis machining unit, 23-position tool changer, multiple vertical and horizontal drilling heads, grooving saw blade, and extensive routing and drilling capabilities. It is suitable for complex furniture, cabinet, door, panel, and solid-wood machining applications. Thanks to its versatile configuration, the machine can perform routing, drilling, sawing, grooving, and angled machining operations in a single setup. Cjdpjzp Ih Ejfx Ap Dehd A highly capable and well-equipped CNC machining centre with very low operating hours, ready for immediate production.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Codpfoz Rrbwjx Ap Dshd Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-201-76-6720, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 270 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BMG311 VENTURE316XXL 6m machine 10 consoles 6 stops at the rear 6 stops at the front Vacuum system 2 x 90/108 m³/h (50/60 Hz) LED position display system 5-axis main spindle 10 kW Drive5C Programming 5-axis spindle with WoodWop 18-position disc changer below Drilling head with 21 spindles: V17/H4/S0/90° Safety barrier on the left Viewing element barrier on the right VENT.+BMG+B200/300 Chip conveyor on the right PowerClamp pneumatic package for K+AP table Performance pack for Drive5C 9-position linear changer for BMG311 without FLEX5 Measuring probe for tool changer Visualization of vibrations on machining spindle collisionControl Barcode reader package VENTURE for 1D codes HOMAG GROUP control system PowerTouch WoodWop CAD plugin Chodpfjxw H Tcjx Ap Ded WoodWop CAM plugin Professional Machine WoodMotion

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Cjdpfxsz N Swis Ap Dshd Total number of tool changer positions: 14

Condition: used, Year of construction: 2006, HOMAG OPTIMAT BOF 211 / VENTURE 12XL, manufactured in 2006. Codpfxj Ahzqhe Ap Dehd 4-axis CNC machining center with a moving table, water-cooled main spindle, HSK-F63 tool holder, 30-position chain-type tool changer, and drilling head with 12 vertical drilling spindles. Control system: HOMAG powerControl PC85, woodWOP 7.2, updated operator panel with Windows 7. Scope of supply: Vacuum pump, clamping devices and edge clamps, selection of vacuum cups, as well as ceiling/projection laser. Not included: Machining and adapter units, tools, and lifting conveyors. Inspection by appointment only. Price upon request.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: P260713248, 𝗢𝘃𝗲𝗿𝘃𝗶𝗲𝘄 The HOMAG VENTURE 115M is a high-performance, 5-axis CNC machining center designed for the precision machining of wood, wood-based panels, and similar materials. Its robust moving-gantry construction delivers outstanding rigidity, accuracy, and productivity for complex machining operations. Chsdpfx Apozmgkmo Ded 𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀 • 10 kW DRIVE5CS 5-axis spindle (8 kW continuous), 1,500–24,000 rpm. • A-axis: ±100°, C-axis: ±361°. • HSK F63 automatic tool interface with liquid-cooled spindle. • Suitable for milling, drilling, sawing, and true 3D machining. 𝗪𝗼𝗿𝗸𝗶𝗻𝗴 𝗔𝗿𝗲𝗮 • X: 3,100 mm • Y: 1,250 / 1,415 mm • Maximum workpiece thickness: 160 mm • Clearance height: 260 mm 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗘𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 • 12-spindle vertical drilling unit. • Horizontal drilling: 4 spindles (X) + 2 spindles (Y). • Automatic 90° grooving saw. • 21 automatic tool positions (14 rear + 7 side magazine). 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗛𝗮𝗻𝗱𝗹𝗶𝗻𝗴 • Vacuum console table with LED positioning. • Divided vacuum zones for pendulum processing. • Pneumatic stops and adjustable vacuum consoles. 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 & 𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲 • HOMAG powerControl with 21.5" Full HD multi-touch display. • woodWOP CNC software with integrated 3D visualization. • Professional CAD/CAM package supporting DXF, STEP, and IGES. 𝗦𝗮𝗳𝗲𝘁𝘆 & 𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆 • CE compliant with bumper protection and laser safety scanner. • EcoPlus energy-saving mode and remote diagnostics via TeleserviceNet. 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 Furniture manufacturing, doors, windows, architectural millwork, solid wood components, interior fit-out, and complex 3D machining.

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: Chodpfx Apszr N H Us Ded • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: used, Weeke Venture 06M machining center X-axis: 3130mm Y-axis: 1250mm Z-axis: 85mm 18 drilling heads (12 vertical and 6 horizontal) HSK milling spindle, 9kW 8-position tool magazine Grooving saw Chjdpfx Ae Ahiuhop Dod Machine available immediately. Loading included in the price.

Condition: excellent (used), Year of construction: 2013, operating hours: 3,000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 extraction rails, Power-Clamp connection, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units, single operation: 3300 mm; pendulum operation: max. 1740 mm Tool diameter 25 mm: single operation: 3475 mm; pendulum operation: max. 1915 mm Codpfsy E Npfex Ap Dehd – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EC-compliant; Safety enclosure on the right with door Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer (side mounted) Drilling head with 16 spindles (V12/H4/S0/90°) DRIVE5C+ interface for aggregates Tool length measuring probe Software for position measurement and CNC coordinate rotation Tool transfer station Coolant tank for processing spindle Vacuum pump 300/360 m3/h Powerclamp pneumatic package Control system: POWERCONTROL PC85 with POWERTOUCH system; IPC POWERPACK Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM standard interface Documentation and control texts: German Delivery includes only the tools and HSK tool holders shown in the images!

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Chjdsx Ey H Iopfx Ap Dod

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Working area X: 3050 mm Working area Y: 1300 mm 11 kW electro-spindle with vibration sensor, HSK-F63 tool holder C-axis with interface for machining units/modules Interface pre-configured for FLEX-5 unit 13 vertical drilling bits 4 horizontal drilling bits Adjustable saw blade at 0°/90° 12-position disc tool changer EASY-EDGE gluing unit Sawing and cutting unit Combined edge profiling and finishing unit Work table with 6 rows of supports Control system: Power Control with PC85 Software package for AV-PC Cedjz Du T Uopfx Ap Djhd Remote control Chip conveyor belt Vacuum pump Safety mats Protective nets Includes 2 units (edge trimming blade, combined edge trimming and scraping unit), Easy-Edge, and approx. 10-12 suction cups.

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture FV - Flexible and precise vision measurement system in three variants The Baty Venture FV is a state-of-the-art vision measuring system developed for the fast and precise inspection of complex workpieces. It provides optical measurements that enable comprehensive detection of the workpiece geometry. This system is particularly suitable for the manufacturing industry, which demands both speed and precision in quality control. The Venture FV is available in three different versions to cover different measurement requirements: Available models: Baty Venture FV1080 With a measuring range of 100 mm x 80 mm, this compact version is ideal for smaller workpieces. It offers fast and precise inspection and is perfect for applications where both optical and tactile measurements are required. Baty Venture FV2020 This variant has a measuring range of 200 mm x 200 mm and is suitable for medium-sized workpieces. The CNC control in combination with the Fusion 3D software enables fully automatic measurements, which increases efficiency and precision during inspection. Baty Venture FV3020 With a larger measuring range of 300 mm x 200 mm, the FV3020 is the largest variant available. It is particularly suitable for the inspection of complex workpieces where high precision and detailed measurements are required. Common functions: CNC control: all models are CNC controlled, enabling fully automated, repeatable measurement processes that increase throughput on the shop floor. Software: This powerful software supports CAD import/export, DXF overlays and reports that include statistical process control (SPC). Codeuyig Sspfx Ap Dohd Programmable LED lighting: LED lighting provides optimal illumination of the workpiece to enable accurate edge detection and measurement. Advantages: Versatility: with three different variants, the Baty Venture FV offers the perfect solution for workpieces of different sizes and complexity. High measuring speed: Thanks to the CNC control and user-friendly software, measuring times are reduced and efficiency is increased. Precision: The measuring device ensures that both simple and complex workpieces are measured with maximum accuracy. The Baty Venture FV offers the ideal combination of speed, precision and flexibility for companies that need a reliable inspection solution in their production

Condition: used, machine/vehicle number: 008495, X axis working area: 4175 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Chodpfxsy Edqqj Ap Dod Total number of tool changer positions: 12

Condition: good (used), Fan model: HPB-F-040-300T Motor model: SKh90-2S2 Latest use: Air cushion table External dimensions: Cedpfx Apoyz Tc Is Dshd Width: 700 mm. Depth: 450 mm. Height: 450 mm. Weight: approx. 20 kg. Condition: good, second-hand

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Chjdpfeyy U S Isx Ap Djd Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling (X-direction): 2 Number of spindles for horizontal drilling (Y-direction): 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Cedpfx Apeyttf Sj Dshd Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied based on availability (left side only). The machine is sold and delivered in its actual and legal condition (‘as seen and approved’), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection, and assumes responsibility for installation, safety, and use of the machine at the destination. External reference: 6906

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture Plus XT - High-precision multi-sensor measuring system for very large workpieces The Baty Venture Plus XT is a sophisticated multi-sensor measuring system specially developed for the inspection of very large and complex workpieces. It offers outstanding precision and flexibility for companies that need to perform demanding quality checks. The robust design, combined with state-of-the-art CNC control and Fusion 3D software, enables automated and repeatable measurements on a large scale. Available models: VP-80100-CNC-XT With a measuring range of 800 mm x 1000 mm x 460 mm, this model offers the perfect solution for large workpieces. The combination of optical and tactile measurements enables precise data acquisition. The model is ideal for applications where medium to large components need to be measured efficiently and accurately. VP-80160-CNC-XT This variant has an extended measuring range of 800 mm x 1600 mm x 460 mm, making it ideal for longer and more complex workpieces. With the integrated 6.5:1 zoom optics and programmable LED lighting, this model offers high flexibility for the precise inspection of workpieces of different sizes. Chsdpfouyh Tkjx Ap Dod VP-100120-CNC-XT This model has a measuring range of 1000 mm x 1200 mm x 750 mm and is perfect for very large workpieces. The sturdy aluminum construction and the air bearing axes ensure maximum accuracy, even with heavier workpieces. The fully automatic CNC control and the user-friendly Fusion 3D software make it quick and easy to create inspection programs. VP-100200-CNC-XT With an impressive measuring range of 1000 mm x 2000 mm x 750 mm, this is the largest variant of the Venture Plus XT available. This model is designed for the inspection of extremely large components and offers maximum precision and flexibility. Thanks to the Fusion 3D software, CAD import/export and DXF overlays can also be used with this variant to perform complex measurements. Common functions: Multi-sensor technology: Combination of non-contact optical measurements and tactile measurements for comprehensive data acquisition and maximum precision. CNC control: Enables the creation of fully automated programs for repeatable and time-saving inspections. Fusion 3D software: Supports CAD import/export, DXF overlays and the creation of detailed reports with statistical process control (SPC). Programmable LED illumination: Provides optimal illumination of the workpiece to improve edge detection and measurement accuracy. Zoom optics: 6.5:1 zoom optics, optionally expandable to 12:1, offers maximum flexibility for different measuring requirements. The Baty Venture Plus XT is the ideal solution for companies that require a flexible and precise inspection solution for large to very large workpieces. It offers the necessary precision and efficiency to meet even the most demanding production requirements

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture XT - Precise multi-sensor measuring system The Baty Venture XT is a sophisticated vision measurement system designed for a wide range of measurement requirements. It is available in three different versions, each covering specific applications: Venture XT VI-2510-MAN (Manual) This manual version is ideal for operators who prefer the flexibility of direct control. With a large measuring range of 250 mm x 100 mm, the manual version offers precise optical measurements and is ideal for inspecting small and medium-sized workpieces. The device is controlled via a joystick and offers simple operation, while the Fusion 3D software captures data accurately and reliably. Venture XT VI-2510-CNC (CNC) This CNC variant offers fully automated measuring processes for repetitive and precise series measurements. With a measuring range of 250 mm x 100 mm, it is ideal for companies that carry out frequent measurements in production environments. The combination of optical and tactile measuring methods ensures comprehensive data acquisition. The Fusion 3D software makes it easy to create and save programs to make the inspection process more efficient. Venture XT VI-3030-CNC-XT (Advanced CNC) The extended CNC version offers even more flexibility with a larger measuring range of 300 mm x 300 mm x 200 mm and additional functions. This model is particularly suitable for complex and large workpieces that require high-precision inspection. The zoom optics (6.5:1) are fully programmable and allow flexible adaptation to different measuring requirements. The Fusion 3D software can be used to automatically generate complex programs that include both optical and tactile measurements. Csdjuyh R Nopfx Ap Dehd Common features of all models: Optical and tactile measurement methods: each Venture XT system combines non-contact camera-based measurements with tactile measurements via a touch probe. Fusion 3D software: All variants use the powerful Fusion 3D software, which supports CAD import/export, SPC analysis and DXF overlays. Programmable LED lighting: Available for all variants to ensure optimum illumination of the measurement objects. The Venture XT is the ideal solution for companies looking for a flexible and precise measurement solution, whether for manual, motorized or fully automated processes

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture Plus - Precise multi-sensor measuring system for large workpieces The Baty Venture Plus is an advanced vision measurement system developed for the precise inspection of large workpieces. It combines non-contact optical and tactile measuring methods and offers a high degree of flexibility for various inspection tasks. With a generous measuring range, it is ideal for companies that require a precise and efficient measuring solution. Available variants: VP-6460-CNC This variant has a measuring range of 640 mm x 600 mm x 250 mm and offers the perfect solution for medium-sized workpieces. The CNC-controlled system enables fully automatic measuring processes, which significantly increases efficiency when inspecting repeated workpieces. By combining optical edge detection and a tactile measuring head, the VP-6460-CNC offers maximum precision. VP-6490-CNC With an extended measuring range of 640 mm x 900 mm x 250 mm, the VP-6490-CNC is ideal for larger workpieces. This variant offers the same advanced functions as the VP-6460-CNC, but with an extended measuring area. The programmable 6.5:1 zoom optics and segmented LED illumination allow flexible adjustment of magnification and illumination to ensure optimum measuring accuracy. Common functions: Multi-sensor technology: combines optical measurements with a tactile probe sensor to perform both 2D and 3D measurements. CNC control: Both variants enable fully automated measurements that can be programmed directly via the user-friendly Fusion 3D software. Fusion 3D software: Enables the import and export of CAD data, DXF overlays and the creation of complete reports, including statistical process control (SPC). Programmable LED lighting: Segmented lighting ensures optimum illumination of the workpiece, improving edge detection and measurement accuracy. Zoom optics: 6.5:1 zoom optics, optionally upgradeable to 12:1, offer a high degree of flexibility for various measuring tasks. Cedpfsuyh Stsx Ap Dehd Advantages: High flexibility: Ideal for large and complex workpieces thanks to the large measuring range and the ability to perform both tactile and optical measurements. Automation: The CNC control and Fusion 3D software allow measurement programs to be created and executed multiple times, increasing efficiency. Precision: Thanks to the multi-sensor technology and robust design, the system delivers precise and repeatable results, even with challenging workpieces. The Baty Venture Plus is the ideal choice for companies looking for a precise and flexible solution for measuring large workpieces while benefiting from automation

Condition: used, Year of construction: 2004, number of axes: 4, controller model: POWERCONTROL PC85, working width: 1,220 mm, milling spindle speed (max.): 24,000 rpm, working length: 3,250 mm, TECHNICAL DETAILS Working area X-axis: 3,250 mm Working area Y-axis: 1,220 mm Number of working areas: 2 Table system: Pod-and-rail table Number of vacuum pod holders: 6 Number of controlled axes: 4 Number of drilling units: 1 Number of milling spindles: 1 Number of grooving units: 1 Drilling unit Position: top Vertical drilling spindles: 12 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Position: top Controlled axes: 4 Motor power: 12 kW Speed: 24,000 rpm Cooling: Liquid cooling Tool change: automatic Grooving unit Position: top Design: fixed, for producing grooves in the X-direction Maximum tool diameter: 100 mm Motor power: 2.2 kW Speed: 7,500 rpm Number of tool change stations: 16 Tool magazine on the machining head: 8 slots Tool magazine on the rear of the machine: 8 slots MACHINE DETAILS Control system: POWERCONTROL PC85 Programming software: WOODWOP 5 Main spindle power: 12 kW Total connected power: 22 kW Vacuum pump capacity: 100 m³/h EQUIPMENT CE marking Pod-and-rail work table 6 vacuum pod holders Vacuum pump Automatic tool changer 2 tool magazines, each with 8 slots Protective device for machining units with safety sensors Front safety mats Liquid cooling of the milling spindle The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. Chsdpfx Apozmtl Rs Djd External reference: 7716

Year of construction: 2013, condition: used, Sewing machine Müller Martini Ventura MC (3215) Year: 2013 Description: - Colour monitor with touch screen Chedpjrmyp Rofx Ap Ded - Semi automatic setting - Feeder - ASIR Automatic Signature Image Recognition: Asir III - 2 + 2 opening possibilities - Book block separator - Book stacker - Roller table delivery - PIAB/Venturi

Condition: used, Year of construction: 2009, machine/vehicle number: V445C3-00236, Zoller Venturion 450 Precise measurement regardless of operator High degree of automation with CNC axes, autofocus, and rotary encoder Chodpfx Aoy D D T Asp Djd Power-operated and universal tool clamping High-precision “ace” spindle clamps tools at the push of a button ZOLLER image processing “pilot 4.0” and large 24" monitor Industrial high-resolution camera Next to the CNC machine, in the workshop, in manufacturing cells User-friendly

Year of construction: 2016, condition: used, Sewing machine Cjdjz Atcuepfx Ap Djhd Muller Martini Ventura MC 200 (A371.1000) Year: 2016 Cycles: 1,5 mio (stitches) Description: - Commander with touchscreen - Automatic setting - Feeder - ASIR Automatic Signature Image Recognition: ASIR III - 4 + 4 opening possibilities - Book stacker - PIAB Max. mechanical speed: up to 200 cycles/min Maximum size range: 510 x 320 mm Minimum size range: 120 x 75 mm Number of stitches: 13 Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 400 mm, area performance: 1,200 m²/h, overall weight: 22 kg, warranty duration: 12 months, tank capacity: 4 l, water tank capacity: 4 l, I am offering the innovative Aventurier Artist 1 SE cleaning device, which combines effective scrubbing and debris collection in a single pass. This is a professional machine designed for daily cleanliness maintenance where precision, convenience, and operational efficiency are essential—ideal for schools, offices, clinics, hotels, restaurants, and small commercial spaces. Key features: • Rotating cleaning head – enables easy maneuvering and access to hard-to-reach areas: corners, edges, under furniture. • Compact size and ergonomic design – adjustable tilt angle allows adaptation to the operator's height, ensuring comfort even during prolonged use. • Intuitive operation – the touch control panel allows quick and easy adjustment of the operating mode to the specific task and surface type. • Versatility – effectively removes dirt from all types of hard flooring, including porcelain tiles, concrete, stone, and vinyl panels. • Quiet operation – perfect for use during opening hours and in noise-sensitive environments. Technical specifications: Theoretical performance: 1000–1200 m2/h Working width: 40 cm Brush pressure: 15 kg Vacuum pressure: 8000 Pa Chjdpfxjwz Nr Eo Ap Djd Brush rotation speed: 350 rpm Average water consumption: 100–140 l/m2 Tank capacity: clean water – 4 l / dirty water – 4 l Operating time: Eco mode 150 min / Turbo mode 120 min Charging time: 100 min / per battery Noise level: 60 dB (Eco mode) / 68 dB (Turbo mode) Cleaning modes: Eco/Auto/Turbo/Sterilization/Deep clean Dimensions: 110.4 x 43.9 x 34.6 cm Gross weight: 22 kg Device characteristics: • Equipped with a HEPA filter for effective filtration and disinfection. • High-resolution LCD display + intelligent voice system • Easy removal of the dirty water tank enables convenient cleaning, preventing unpleasant odors • Clean water tank with dual inlets suitable for all types of faucets • Extended battery run time – up to 2.5 hours on a single charge! • Edge cleaning system • Antibacterial body Equipment included: Battery Disc brush Squeegee blade HEPA filter LED lighting Wi-Fi