Used Table Top Machine for sale (70,773)

Condition: used, Zwick   Type: BZ1.0 / TH1S   Zwick table-top testing machine   Zwick with a maximum force of 1.0 kN.   Crosshead travel: 1150 mm. Testing speed: 0.1 ... 1800 mm/min   Scope of supply: (See images) Ibjdpfx Afjzdryzousc   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have by phone.

Condition: used, Zwick Type: BZ2.5/TN1S Zwick table-top testing machine, tensile strength measuring machine Application area: Wide range of applications, from testing plastics and elastomers to testing paper, textiles, foam, and wire, as well as component testing. Ibjdjzdry Iepfx Afuec Load frame: Max. test force FN in tension/compression direction: 2.5 kN Height (h1): approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Height of the working area h min ... h max: Travel carriage angle mounted upwards: 227 ... 573 mm Travel carriage angle mounted rotated by 180°: 57 ... 403 mm (each without connecting pin) Connection values: Electrical connection: 115/230 V, 4/2 A, 1-phase/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Ijdpfszt Ai Ejx Afuobc Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Ibsdezimgtopfx Afuec Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm - 1x throwing turbine – power: 7.5 kW – with frequency inverter The turbine supports both left and right rotation. - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. - Total machine power: 9.7 kW Ibjdpfxjw Nbycs Afuec The machine features a frequency inverter for adjustable turbine speed. A major advantage is the ability to switch turbine direction between left and right rotation. Blasting unit is CE-certified. Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Isdpfjzp E T Ssx Afuobc Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, Zwick / Roell Iodpfx Aezdr Hnofujbc Type: BDO-FB0.5TH Zwick / Roell tensile testing machine, table-top testing machine Material testing machine BDO-FB0.5TH Testing load in tensile/compressive direction: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Width of test area: infinite Test area depth: 100 mm Max. working distance without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power data: 115/230 V (PH, N, PE) Rated power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Condition: used Scope of supply: (autosampler as shown in the picture) (Subject to changes and errors in the technical data; details are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Iodpfezwvu Nex Afusbc Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Ibedpoz S T Ubefx Afuoc Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 76-1302, overall weight: 7,900 kg, input voltage: 380 V, input frequency: 50 Hz, Schneider CNC die-cutting machine, Type 2032, with vibrating table, Type 3041 For sale is a high-performance CNC die-cutting machine from the Swiss quality manufacturer Schneider Maschinenbau AG, including a vibrating table, Type 3041. The system is ideally suited for processing and die-cutting cardboard, corrugated cardboard, and packaging materials. Thanks to its robust industrial design, the precise NUM-750 CNC control system, and the automatic material handling, the machine still offers an economical solution for many packaging and display applications today. Technical data, Schneider Type 2032 Year of construction: 1992 CNC control: NUM 750 Power: 28 kW Voltage: 380 V / 50 Hz Operating pressure: 100–240 bar Machine weight: approx. 7,900 kg Swiss Made Vibrating table, Type 3041 Year of construction: 1986 Ibodpfxez R Dncs Afuoc Power: 3 kW Weight: approx. 1,600 kg Equipment CNC-controlled die-cutting system Hydraulic clamping system Automatic material feed Pneumatic hold-down devices Includes vibrating table Extensive conveying and feeding system Condition The machine comes from industrial use and can be inspected by appointment. Sale includes all existing system components as shown in the photos. Total weight of the system: approx. 9.5 tons Inspection possible at any time by arrangement. Loading and transport are the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Ibedpfxozwqyys Afujc Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Iodpfjz En Afsx Afujbc Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: ready for operation (used), functionality: fully functional, DELTA LC 400 / Rotary table grinding machine -Max. grinding diameter 400mm -Magnetic chuck -Grinding height / distance between table and grinding wheel approx. 230mm -Spindle speed 2850 rpm Iedpfx Aez Nkf Esfuebc -Fine feed 0.01mm -Distance between column and grinding wheel axis approx. 320mm -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight 700 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Ibedpfxow Nylke Afuoc Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Year of construction: 2006, condition: ready for operation (used), TETRA PAK ESL GABLE TOP FILLING MACHINE FOR 1000/500/300 ml WITH TWIST CAP APPLICATOR TETRA REX TR22 FILLER YOM 2006 ESL UNIT INCLUDED CAPACITY 2800 CARTONS PER HOUR 13.300 RUNNING HOURS Isdpfx Ajz E U Dvofuebc EXCELLENT TECHNICAL CONDITION

Condition: good (used), Siegmund System Perforated Table including Silverline Profile Processing Station For sale is an extremely robust, combined industrial workstation for metalworking, jig and fixture construction, or precise profile manufacturing. The system consists of top-quality components: 1. Siegmund System Perforated Table (base) - High-precision, extremely warp-resistant, and solid welding and clamping table from the world market leader, Siegmund. - The perforated system (including perforation on the side panels) allows for flexible and repeatable positioning of stops, clamping bolts, and angles. Ibodpfx Asztawgefuec 2. Silverline Clamping & Processing System (assembly) - Solid upper structure with precise linear guides for longitudinal movement. - Two parallel-arranged, yellow motor heads (milling/drilling units) for simultaneous or staggered processing steps. - Three heavy-duty, horizontal clamping bars securely fix workpieces from the rear against the stops, ensuring material protection. 3. Pneumatic Comfort Control - Ergonomic control panel on the front with a 5-way numbered lever control. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge and safety emergency stop switch. - Powerful, central electric motor for the mechanics/hydraulics. Dimensions: Tabletop: 2000 x 1000 x 200 mm Table height: approx. 900 mm, height adjustable Overall dimensions: 2420 x 1400 x 1580 mm This offer is for one Siegmund System Perforated Table. "Everything from a single source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2009, HERMA provides specialized automated and semi-automated labeling systems designed for boxes, cartons, and packaging lines, built around the HERMA 500 High-Performance Labeler. [[1](/), [2](/)] Key Box and Carton Labeling Solutions - Print & Apply Systems: Integrates a label printer and applicator unit to print variable data (such as shipping labels, barcodes, or tracking info) in real-time right before dispensing onto boxes. - Tamper-Evident Seal Labelers (e.g., HERMA 362E TE): Designed for sealing rectangular, dimensionally stable folding boxes and cartons with L-shaped or C-shaped security labels, achieving speeds up to 200 products per minute. - Top and Bottom Labelers (e.g., HERMA 652C): Compact, space-saving systems equipped with dual HERMA 500 applicators to apply labels simultaneously or sequentially to the top and bottom of packages at speeds up to 250 products per minute. - Two-Side Labelers (Series 362 - E, C, M, and TE variants): Provides accurate side or corner labeling for primary and secondary carton packaging, featuring synchronous centering devices and quick, tool-free format adjustments. Core Features Ibjdpfx Aoz Rvb Iofusc - Modular Architecture: Built with standardized components allowing easy integration of thermal inkjet or thermal transfer printers, vision inspection systems, and automated rejection units. - High Precision & Speed: Powered by the HERMA 500 applicator series for high-cycle rates and stable label positioning. - Connectivity & Control: Features touch-screen operation, PLC/Ethernet interfacing, and automatic line-speed synchronization Type: Labeller for Boxer, top Jars, Bottles, Small Boxes, etc

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Iodpfx Afjz S T T Rsuobc Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: good (used), OMAG / AFFRI 903 RSD Hardness Testing Machine: Professional, stationary bench-top hardness testing machine from the renowned Italian manufacturer OMAG di AFFRI DAVIDE s.r.l. (Model 903 RSD). Semi-automatic hardness tester for Rockwell, Super-Rockwell, Brinell, and Vickers hardness testing methods according to ASTM and DIN EN ISO. The RSD series hardness testers are suitable for all conditions, both in the workshop and in the laboratory. Ibedpfxezni D Es Afuec Rockwell and Brinell HBTW hardness values with high accuracy (better than 0.5%) in almost any testing environment. Accurate measurement results are achieved from the very first test. The load is applied using a dynamic load cell. A user-friendly interface with real-time statistics, graphics, and large archive storage, as well as conversion to other methods, makes measuring a breeze. For hardness testing on virtually all metals: iron, steel, hardened steel, cast iron, brass, aluminum, copper, and metal alloys. The device has been regularly inspected and certified by the DAkkS-accredited laboratory 3-Rath Kalibrier + Prüftechnik (last inspection on April 28, 2025, for the HRC method according to DIN EN ISO 9000ff). Technical data: Manufacturer: OMAG / AFFRI Group (Italy) Model: 903 RSD Serial number: 76599 Testing method: Rockwell (including calibrated HRC) Voltage: 115 – 230 V Weight / Testing force: 195 Kgf Special feature: Height-adjustable test head for flexible workpiece sizes. “Everything from one source: We would be happy to offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2024, condition: like new (used), functionality: fully functional, Sure. Below is a technical and commercial description suitable for product presentations, catalogs, or proposals: ### Mertmakina Mattress Packaging Machine with Integrated Quality Control System Ibjdpfx Aez Dk Arefuoc The Mertmakina mattress packaging machine is an industrial solution designed to automate and optimize the mattress packaging process, ensuring speed, uniformity, and quality in the final product packaging. The equipment integrates a quality control system, allowing for the monitoring of key stages in the packaging process and the identification of potential anomalies before the product leaves the line. #### Key Features * Automatic mattress feeding and positioning, ensuring a continuous and regular process. * Automatic packaging system, adapted to the dimensions and characteristics of different mattress models. * Control of the application and sealing of the packaging, ensuring a uniform and consistent finish. * Integrated quality control system, designed to verify process parameters such as positioning, packaging integrity, and proper sealing. * Error and anomaly detection, with the possibility of signaling or automatic rejection of units that do not meet the defined parameters. * Intuitive operating interface, allowing the operator to monitor the machine's status, adjust parameters, and consult process information. * Recording and monitoring of production and control data, contributing to traceability and continuous improvement of production. * Robust industrial construction, suitable for operation in continuous production environments. * Increased productivity and reduced manual intervention, while simultaneously reducing variability between packages. ### Integrated Quality Control The integration of quality control transforms the machine into a more complete production and inspection system. Each mattress can be monitored during the process, allowing verification of whether the packaging has been correctly applied and whether the product meets the previously defined parameters. When a condition outside the established limits is detected, the system can generate an alert for the operator and, depending on the installed configuration, automatically direct the product for inspection or rejection. In this way, the solution helps to reduce packaging errors, increase the consistency of the final product, improve traceability, and reduce waste. ### Result The Mertmakina mattress packaging machine, equipped with an integrated quality control system, provides a solution focused on automation, productivity, standardization, and process control, enabling companies to increase the efficiency of the production line and ensure a consistent final presentation of the mattresses.

Condition: used, Marel labeller for the top and the bottom of the pack Ibodjz Ndghopfx Afusc This Marel labelling machine puts a label on the top and on the bottom of a pack in one pass. Packs come in on the conveyor with adjustable guides; the head above the belt labels the lid and the head below the belt labels the base. It is operated from a touchscreen next to the conveyor. The rating plate is still on the machine, but only the Marel name can be read, so the model and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling machine, top and bottom label Label heads: 2 (above and below the belt) Infeed: Conveyor with adjustable guides Controls: Touchscreen

Condition: used, Labeller that applies a label to the top and the bottom This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side. It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling machine, top and bottom label Label heads: 2 (above and below the belt) Ibodpoz Ndf Rjfx Afuoc Controls: Touchscreen Construction: Stainless steel frame on adjustable feet

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 023116, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces, such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate that serves as a measuring table, with a laterally mounted guide system, enabling open loading from three sides. Technical Core Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary-tilt head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 µm+ (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Ibsdpfx Afjzz Hyweuec Sensor System (Standard Configuration): Delivery: Without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unobstructed Accessibility: Due to the lateral guidance of the horizontal arm, the measuring table is freely accessible, which facilitates the placement of heavy workpieces using a crane or forklift. Multi-Sensor Capability: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2015, operating hours: 1,463 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, workpiece weight (max.): 250 kg, total length: 908 mm, total width: 480 mm, overall weight: 3,250 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 30, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 130 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining centre FEHLMANN Picomax 56 TOP TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: HEIDENHAIN TNC 620 Stroke X axis: 500 [mm] Stroke Y axis: 400 [mm] Stroke Z axis: 400 [mm] Feed rate on X, Y and Z axes: 20000 [mm/min] Min. distance spindle nose / table: 120 [mm] Max. distance spindle nose / table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. load on table: 250 [Kg] Spindle type: ISO 30 Max. spindle speed: 12000 [rpm] Tool changer magazin number of stations: 20 Max. tool lenght: 240 [mm] Ibodpfx Aezzmmwefujc Max. weight of single tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool change time: 3 [sec] Chip to chip time: 8 [sec] Number of cutting hours: 1463 [h] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] INCLUDED EQUIPMENT: HEIDENHAIN linear glass scales on the X, Y, and Z axes x1 FRIBOSA Switzerland precision vise x1 RENISHAW TS 440 part probe x1 RENISHAW TT 140 tool probe x3 ISO30 tool holders x1 FEHLMANN GPRPLUS50 toolsetter x1 coolant tank with pumps x1 spindle chiller Various tightening wrenches Axis locking brackets for machine transport Technical and operating manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall machines, as well as milling, drilling and tapping machines, and CNC grinding machines.

Condition: ready for operation (used), Year of construction: 2011, DELTA LC 500 – Circular table grinding machine - CE marking - Year of manufacture 2011 - Magnetic table – Rotary table 500 mm - Max. grinding diameter 500 mm Ibsdpfx Aozkvz Njfujc - Distance column – grinding spindle axis 315 mm - Grinding height max. magnetic clamping plate – grinding wheel 215 mm - Grinding spindle speed 2840 rpm - Fine adjustment via micrometer 0.01 mm - Coarse adjustment (height adjustment) motorized via keyboard - Spindle motor 3 kW - Dimensions of the grinding wheel 200x80x78 mm - Machine enclosure - Coolant system - Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight 800 kg Errors and omissions excepted.