Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Kedpfx Abszumxmjlenc Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Condition: good (used), functionality: fully functional, working width: 500 mm, total width: 1,100 mm, total length: 2,250 mm, total height: 1,400 mm, Water-cooled LED-UV dryer in operation; the machine is equipped with a control system allowing speed adjustment. It features two powerful water-cooled LED lamps for immediate surface drying. Knodpjy Exz Refx Abljc

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Knedjzlktpepfx Abloc Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW Kedpfxsw H Aw Sj Ablenc This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Knjdpfstxnp Njx Ablec

Condition: used, functionality: unexamined, 3x KREMLIN Airmix paint spraying/material pumps – 1x Type 17A + 2x Type 20-15 – with accessories Description: For sale is a package consisting of three professional KREMLIN Airmix paint spraying/material pumps from a former paint shop. The units were used for professional painting applications and are mounted on mobile or stationary units with corresponding accessories. Scope of supply: 1x KREMLIN Airmix Type 17A Knodpfxez Iuiqe Abloc - KREMLIN pneumatic Airmix pump - Type plate: 17A - Translation according to type plate: 10:1 - Serial No.: 72989 - with material container - Pressure regulator - Pressure gauge - Hose set - mobile base 2x KREMLIN Airmix Type 20-15 - Type: 20-15 - one unit with visible serial no. 06E 1581 - each with pressure regulators and pressure gauges - Material container - Material and air hoses - Accessories as shown in the pictures - mounted on mobile units/cabinets The units have not been in operation for a longer period. A current functional test has not been carried out. Due to the prolonged period of inactivity, an inspection, cleaning, and possibly an overhaul of the pumps, seals, and valves should be performed before recommissioning. The units are therefore explicitly offered in their current condition and without testing. Technical documentation is still available for the KREMLIN 20-15; specific spare parts and repair parts such as repair kits and coupling parts are also still offered. Therefore, in addition to recommissioning, the pumps can also be used as a source of spare parts or as a spare parts package for existing KREMLIN Airmix systems. Location: 3608 Thun, Switzerland Availability: immediate Inspection: possible by appointment Sale: preferably as a complete package The sale is ex works, in the current condition, without warranty or guarantee. Subject to prior sale. Selling price: 1,450.00 EUR Price net, any applicable statutory taxes and duties are not included. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: good (used), Year of construction: 2021, functionality: unexamined, working width: 400 mm, height adjustment type: electric, Roller application machine Manufacturer: Cosma Type: 400 RC Year of manufacture: 2021 2-roller application machine for applying oil Knsdpfxjzzdivj Abloc With the Cosma roller application system, oils are applied to, among other things, solid wood floors (parquet), paneling, stairs, garden material, scaffolding wood, and wall decorations. Working width: 400 mm Suitable for workpieces: Thickness: 10 - 50 mm Working height: 900 mm Equipped with: - Dosing roller, 0.37 kW - Rubber-coated application roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height display Control panel for: Feed speed, amperes per roller, and roller height adjustment

Condition: used, Mobile Industrial Painting Tables with Metal Grid Surface – 2 Units Available Professional mobile painting and coating tables designed to support large workpieces during surface preparation, painting, lacquering, and finishing operations. The spacious 3000 × 1000 mm metal grid work surface allows for the convenient positioning of large panels, furniture components, metal profiles, frames, and other workpieces. The open grid construction provides access around the workpieces, while the mobile steel frame makes it easy to move the tables between preparation, painting, and drying areas. Technical specifications: Type: Mobile industrial painting table Length: 3000 mm Width: 1000 mm Height: 950 mm Knjdez S Tkispfx Abloc Work surface: Metal grid Frame: Welded steel construction Mobility: 4 castors Condition: Used Available quantity: 2 units Applications: Suitable for furniture manufacturing, woodworking, metal fabrication, industrial painting, lacquering, and surface finishing workshops. The tables do not have an integrated extraction or ventilation system. Condition: Used industrial equipment with visible paint residues and normal signs of wear. Actual condition is shown in the photographs. Price: EUR 350 excluding VAT per table. The tables can be purchased individually or together. Located in Gatciems, Latvia. Inspection is possible by prior arrangement. Loading assistance is available. Transport within Europe can be arranged upon request. MixStock reference: 49914-50

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. Knodpfxsz Hbm Te Abljc The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg Knsdpfxst Dx U Sj Abloc 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Kedpfxot S Efgo Ablonc Total power 37,7 kW Very good condition, available immediately.

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. Kedez Ahr Rspfx Ablenc The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, UV curing system for slats, profiled wood, and parquet Manufacturer: Cefla Type: TLFP Kedsz A T T Rspfx Ablsnc Year of manufacture: 2005 UV curing tunnel for the continuous UV hardening of paints and coatings using high-intensity ultraviolet lamps directly in the production line. Passage width: approx. 350 mm Passage height: approx. 90 mm 1x adjustable UV lamp from above, left side, approx. 80-120 W/cm 1x adjustable UV lamp from above, center, approx. 80-120 W/cm 1x adjustable UV lamp from above, right side, approx. 80-120 W/cm 2x pivoting UV lamps from above Dimensions: approx. 5000 L x 1600 W x 2400 mm H (with fan) Weight: approx. 1500 kg Connected load: approx. 42 kW

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland Kedpfx Aexvivqeblonc

Condition: used, Sturdy Lübbers hay-drying trolleys with an adjustable central rake. Technical data: Knodpfx Abeztvvrolsc - Length: 3,500 mm - Width: 1,000 mm - Height: 2,000 mm - Load capacity: approx. 700 kg

Condition: used, Year of construction: 2014, - Manufacturer: Cefa/Sorbini - Model: SMARTCOATER MF-EVO - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm - Operating side: right - Coating roller: rubber hardness ~ 50 - 60 Shore - Coating quantity: ~ 4-50g/m2 - Coating roller diameter: 250 mm - Metering roller diameter: 173 mm - Metering roller with switchable reverse operation - Double diaphragm pump: 1 piece - Transport system with conveyor belt - Compressed air connection: 6 bar Ksdjz Ehq Njpfx Ablonc - Machine is mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Control cabinet is mounted on the rear of the machine - Voltage, frequency: 400 / 50 - Voltage fluctuations max. +/- 5 %

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Knodpoy E Huxofx Ablsc

Condition: like new (used), Year of construction: 2017, functionality: fully functional, working width: 1,600 mm, total length: 75,000 mm, total width: 17,000 mm, Technical Details: Cefla painting/finishing line with roller coating machines for panel finishing *Maximum working width: 1650 mm *Automatic loading system with integrated robot *Line dimensions: 75 x 17 m *Line configuration: *3 x Cefla Smartclean 32-B brush cleaning machines *3 x Cefla Smartcoater MF Evo roller coating/painting machines *1 x Cefla Smartcoater SP1 Evo finishing machine Knedpfx Aeyv Hzgeblsc *2 x Cefla UV-R M1 1600 UV curing tunnels (1 UV lamp each) *1 x Cefla UV-R M3 1600 UV curing tunnel (3 UV lamps) *1 x Cefla UV-R M2 1600 UV curing tunnel (2 UV lamps) *Cefla TR500 motorized conveyor line *Cefla automatic panel turner *Costa top sanding machine with 1 roller and 1 finishing pad *Automatic loading system with 2 x ABB robots

Condition: used, Year of construction: 2018, Technical data: Pos.1 - Dedusting VEN CLEAN Smart - Working width: 1,300mm - Length: 1,060mm - Roller transport: 1,000mm - Extraction fan 4,000m/h - Compressed air 980Nl/min. - Deduster Air nozzles - With ionisation Pos.2 - Automatic spray gun VEN SPRAY PERFECT - Year of construction 2018 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Part detection via light curtain - CNC 7000 control unit - Operating side right - Gun drive in Duo version Z16 - Dry extraction with filter - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - External filter box, LxDxH: 3500x1280x2740mm - Paint recovery system via V-belt - Infinitely variable feed speed 2 - 6m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 1pc. - Number of spray guns installed 4 pcs. - Number of material pumps 1pc. - Supply air filter cover G5 - Length ~ 6,590 mm - Width 3,666 mm (+1152mm) - Height 2.500mm - Total connection 21 KW - Volt, Hz 400 / 50 Kjdpfozv Td Ejx Abljnc - Colour RAL 7035 - Location, from 01/2025 in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2016, with a new conveyor belt. Functional Description(Source: Excerpt from the operating instructions) Kjdpfezf N Rgjx Ablenc This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: excellent (used), Year of construction: 2001, I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000 Knodpfxei Eup Ee Ablec Year 2001 Working width 1400mm. Total length 4,00m Total power 74,3 kW Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2015, I sell the spraying automat Superfici Magnum. Configuration: 2 arms - 2 heads x 2 guns (4 guns total) Manufacturer: SCM Superfici Knjdpewg Tunsfx Ablsc Model: Magnum. Working width: 1350mm Year 2015. Available immediately. Fully working.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Workpiece length: from approx. 800 mm - endless Ksdpfezpydrsx Ablsnc Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Documentation & wiring diagram available

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Kodpfxjy A Tpqe Ablsnc Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, Technical specifications: - Manufacturer: Venjakob - Model: VEN DRY - Year of manufacture: 2007 - Working height: 920 mm - Number of belt pallets: 6 - Belt pallets with conveyor belts - Pallet length: 6,450 mm - Usable length: approx. 6,200 mm Ksdpfjz A Utrox Ablenc - Inlet width: 1,400 mm - Dryer operates in continuous flow mode - Clearance between tiers: 75 mm - Heat requirement: approx. 137 kW - Hot water temperature: max. 70/60 degrees - Conveyor belt feed speed: 2–10 m/min - Temperature: max. 40 degrees - Air flow rate: 16,309 m³/h - Exhaust air flow rate: 2,400 m³/h - External dimensions: Length: 8,275 mm Width: 2,290 mm Height: 2,560 mm Height: 3,380 mm including supply air unit - Volts/Hz: 400 V/50 Hz - Available: 08/2026