Used Trumpf Lasercell 1005 for sale (383)

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Kjdpfx Aloz Dvfxsdsdt Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Year of construction: 2013, condition: used, machine/vehicle number: S0541C0081, Performance: 13.5 kVA, TRUMPF TruDisc 3001 fiber laser, serial number: L3211M0613S, year of manufacture: 2013, laser power: 3,000 W, power: 20 kVA, separate RITTAL control cabinet, with RIEDEL cooling unit, control unit, 2 processing stations, recorded operating hours (November 2025): 71,954 h, laser on time: 55,034 h. Kjdezqzcxepfx Aldjdt

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: Siemens 840D, _____ Description: Year of manuf. : 2014 Power : 3000 kW Technical Specifications Working area:X = 3,000 mm / Y = 1,300 mm / Z = 600 mm B-axis:135° Kdedpfx Alozuq Npodst C-axis:n × 360° Laser light cable:30 m LLK:0.10 mm Control system:Siemens 840D Teach panel:including teach software Equipment :- Safety enclosure with 1 window and a column for the control panel :- Safety cabin for the rotary changer :- Rotary changer, Ø 4,000 mm :- Extraction pipework :- Scrap conveyor belt :- Status indicator light at the top :- 2 × loading status lights for the rotary changer :- 4 × configurable control interfaces :- Anti-tripping guard Laser Nitrogen:present Oxygen:present Argon:not present Air:not present FastLine Cell:not present ObserveLine:not present Probe:not present

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TruLaser Cell 3000 Highly dynamic and precise CNC laser machine Kdsdpfxsyvfuwo Aldjt solid polymer concrete machine body cantilever axes system 800 x 600 x 400mm travel X-Y-axes with linear motors direct absolute measuring system Z axis with linear guides and ball screw drives TRUMPF control based on SIEMENS Sinumerik 840D sl panel PC for process monitoring integrated switch cabinet and cooling unit water-air incl. start-up and instruction TruFiber 400 Laser equipment compl. TruFiber 400 (G2) Single mode fiber laser for industrial use in welding and cutting: laser power: 400W at fiber end beam quality: M2 1.1 laser light cable: 6m LLK-B operation mode: Cw / modulated max. modulation frequency: 50 kHz pilot laser: standard Trumpf coil feeding unit design tube • Clamping and guiding for coil material • Length up to 800mm • Thickness from 0,1mm to 1,9 mm • Width from 40 to 250 mm • Width adjustment with Handwheel • Cutted parts guidance in a Boxsystem or a funnelsystem • Pneumatic feeding coil 50mm stroke right • Coil feed control

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,000 h, machine/vehicle number: S1631C0399, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: TRUMPF, controller model: TruLaser Cell 8030, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 8,000 h, laser power: 3,000 W, laser wavelength: 1,030 nm, TRUMPF TruLaser Cell 8030 – 3D Laser – 2017 – 3 kW TruDisk is one of the most advanced and efficient 3D laser cutting machines in the world, widely used in the automotive industry, especially for processing hot-formed stamped components, body parts, rocker panels, and B-pillars. The machine is equipped with a TRUMPF TruDisk 3000 fiber laser (3 kW), offering high cutting quality, process stability, and low operating costs. The system features a 5-axis motion system and a spacious, ergonomic working chamber. Technical Data: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH (Germany) Model: TruLaser Cell 8030 Type: L60 Year of manufacture: 2017 Kedpfx Alexxl A Eedsdt Serial number: S1631C0399 Laser: TRUMPF TruDisk Laser type: solid-state fiber laser Laser power: 3000 W (3 kW) Wavelength: 1030 nm Operation: CNC Controller manufacturer: TRUMPF / Beckhoff Controller model: Beckhoff CX-Series (CX2030 / CX2040, TruControl system) Power supply: 400 V / 50 Hz Connected load: 45 kVA Protection: 3 × 100 A Media: electric + pneumatic (no hydraulics) Motion axes: 5-axis 3D machining Maximum cutting thickness: Mild steel: up to 6 mm Stainless steel: up to 4 mm Aluminium: up to 3 mm

Condition: good (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, degree of automation: manual, controller manufacturer: Siemens, controller model: 840D, laser type: CO₂ laser, laser hours: 21,756 h, laser power: 6,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, table length: 4,000 mm, table width: 1,500 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 750 mm, power: 6 kW (8.16 HP), input voltage: 400 V, input current: 200 A, input frequency: 50 Hz, type of cooling: water, Equipment: cooling unit, emergency stop, This TRUMPF TruLaser Cell 7040 was manufactured in 2008. It features a large working area with dimensions of 4000x2000 mm and a Z-axis height of 750 mm. Equipped with a powerful TruFlow 6000-watt CO2 laser, it excels in cutting both thin and thick materials. Take advantage of this opportunity and purchase this TRUMPF TruLaser Cell 7040 CO2 laser cutting system. Contact us for more information. Kjdpfx Alszgv I Uedsdt

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser hours: 7,000 h, laser power: 4,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, power: 4 kW (5.44 HP), Equipment: CE marking, cooling unit, dust extraction, fume extraction, ONLY 7,000 OPERATING HOURS – LASER UNIT! Special Equipment: - Automatic front-opening sliding door Kjdpoyidpqsfx Aldedt - Cabin lighting - Movable pendant control panel - FastLine Cell - 2D cutting tables with support rails & drawers Standard description: - Machine frame with Y-arm and integrated laser unit - Laser unit: CO2 laser TruFlow4000, high-frequency excited - Maintenance-free turbo radial blower - Mirror telescope - Cooling unit - Positioning laser diode - Laser power control - Logbook function - Drives: maintenance-free three-phase servomotors - Illumination under the Y-arm - Magnetic coupling for processing head - Head detection - AutoLasPlus - Pendant control panel - TFT color monitor - Teach panel - Network connection RJ 45 Processing Methods: - Laser cutting - Dynamic cutting head (155mm) - Cutting head (240mm) - PierceLine

Condition: ready for operation (used), TRUMPF 150 MQ VIS focusing optics SN:1277242-00769 + SN:1277243-00865, used, normal signs of use, 100% functional, scope of delivery as per photos. Kdedpfx Alsz Adbzedot

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Kedoz Adb Ujpfx Aldodt

Year of construction: 2012, condition: excellent (used), Used Trumpf Tru Laser Cell 7040 5 axis / 3d cnc laser for sale Type L13 Year 2012 4,000 mm (157 in) Y travel 1,500 mm, 2,000 mm (59 in) Z travel 750 mm, 1,000 mm (30 in) Cutting speed 100,000 mm/min, 173,000 mm/min (65.617 in/s) Kjdsitvihjpfx Aldjdt Laser power: 3.2kw / 3200 watt TruFlow 3200

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Kdedez Ak Dijpfx Aldst Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axes: 100 m/min B / C axes: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axes: 10 m/s² B / C axes: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser power: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Kdodpfx Aljx Dkymjdjt Operating Hours "Laser On" hours: 94,936 h Total operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optic with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including rear-side safety guard Scrap conveyor belt 4× configurable control interface Manifold block for 8 pneumatic clamps per side 2× loading status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without touch probe) Measurement data processing 3× horizontal jig interface Extraction ducting Protective enclosure for rotary changer, including safety guard, 1 window, and column for control desk Status signal tower top & bottom Video monitoring with camera Monitor holder Special installation KLH chiller

Condition: ready for operation (used), Year of construction: 2008, operating hours: 21,756 h, controller manufacturer: SIEMENS, controller model: 840D, laser power: 6,000 W, table length: 3,900 mm, table width: 1,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 750 mm, number of axes: 5, This 5-axis TRUMPF TruLaser Cell 7040 was manufactured in 2008. It features a powerful 6 kW fiber laser and a spacious table with dimensions of 3900 x 1500 mm. The machine is equipped with advanced Siemens 840D control for precision cutting. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser Cell 7040 machine we have for sale. Contact us for further details. - Laser Source Type: Fiber laser- Mains Voltage: 400 V- Frequency: 50 Hz- Connected Load: 104 kVA- Control Voltage: 24 V=- Required Fuse Protection: 3 x 200 A- Compressed Air Connection: 6 - 14 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Laser Hours: 79,361 h- Beam Hours: 21,756 h Kdedpfozzmn Iex Aldet

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and ready for production. Ideal for automotive, aerospace, and general metalworking applications requiring precise 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed upon inspection) Operating hours: 70,000 hours total / 41,125 hours beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively performed by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 employees, 12 million euros in revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose the one that fits your project: Module Scope M1 – Ex Works: Pick-up at our site, loaded onto your truck. Machine tested before handover. For buyers with their own rigging and installation capabilities. M2 – Delivered: M1 + international transport, insurance, and unloading at your facility (DAP/DDP on request). For buyers with an internal installation team. M3 – Delivered & Installed: M2 + mechanical installation, utility connection, first power-up, laser alignment. For buyers without dedicated installation resources. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. For buyers who want the machine producing from day one. Ksdpfsy E Iv Rsx Aldjdt On-site inspection and sample cuts on your own parts are available at our facility in France prior to purchase.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Kedpfx Alozzyl Hsdodt Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Kdodezzkvcopfx Aldjt Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode Kodpfxsz Ay Rre Aldsdt High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Kdedozz Sd Ujpfx Aldet Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Kdsdpfxez A D Irs Aldst Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 15,794 h, machine/vehicle number: A3231E0676, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser hours: 5,111 h, laser power: 12,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 280 m/min, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2024) High-spec 2D fiber laser cutting machine, one owner from new, installed September 2024. 3000 x 1500 mm working area, Siemens Sinumerik 840D SL control. In daily production and under TRUMPF service contract from new. Key data Machine No.: A3231E0676 Year of manufacture: 09/2024 Laser source: TruDisk 12001 with smart beam control Laser power: 12,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 50 mm / stainless 50 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight (rating plate): 7,650 kg Supply: 400 V 3~ / 50 Hz, 74.0 kVA, 3 x 125 A Hours: 15,794 h operating / 5,111 h laser-on Gas mixing Onboard gas mixer fitted - hardware mixing system for two gases, with additional cutting gas connection and gas mix cutting data (N2/O2). No external mixer unit needed. Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (left). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle changer, cleaning and centring. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Transport and installation device supplied. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK control, 21.5" wide-screen multi-touch display. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation, Smart Rerun. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package. Kdedpozz Shyjfx Aldst Pallet changer / automation Automatic pallet changer in longitudinal direction, max. workpiece weight 1,800 kg per pallet (2,200 kg across both). LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB, RJ45 network interface, Central Link, remote support, TRUMPF monitoring software connection. Installation Installed on a mezzanine; steel structure not included. Condition and availability One owner from new, in daily subcontract production in Braintree, Essex. Under TRUMPF inclusive service contract from new - two services a year, parts included - and still covered. Full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available. Enquiries Order confirmation, service history, hours report, cut samples and video on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and production-ready. Ideal for automotive, aerospace, and general metalworking applications requiring precision 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed on inspection) Operating hours: 70,000 h total / 41,125 h beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Kjdpfx Aeukhltsldsdt Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 staff, 12 M€ revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose what fits your project: ModuleScope M1 – Ex WorksPick-up at our site, loaded onto your truck. Machine tested before handover.Buyers with own rigging and installation capacity. M2 – DeliveredM1 + international transport, insurance, and unloading at your facility (DAP/DDP on request).Buyers with internal installation team. M3 – Delivered & InstalledM2 + mechanical installation, utility connection, first power-up, laser alignment.Buyers without dedicated installation resources. M4 – TurnkeyM3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol.Buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts available at our facility in France prior to purchase.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. Kdjdoza U Nfopfx Aldet - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Bending Length 4250 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 41,622 h, controller model: Siemens Sinumerik 840 D, laser power: 3,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale is a TRUMPF TruLaser 5030 fiber (L41) including LiftMaster Compact! The machine will remain powered on until September 23, 2026. Disassembly will be carried out by a certified TRUMPF partner. TECHNICAL DETAILS Laser power: 3,000 W Working area (X / Y / Z): 3,000 × 1,500 × 115 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 20 mm Sheet metal thickness aluminum max.: 15 mm Simultaneous speed max.: 235 m/min Accuracy: ± 0.1 Sheet metal format max.: 3,000 × 1,500 mm Sheet metal format min.: 1,000 × 1,000 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height loading side max.: 90 mm Part size min.: 150 × 150 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height unloading side max.: 250 mm MACHINE DETAILS Control model: Siemens SINUMERIK 840D SL Touch color screen: 17" Operating hours: 81,443 / 76,533 / 41,622 h Dimensions & Weight Dimensions (L x W x H): 9,373 x 2,964 x 2,383 mm Weight of base machine: 12,700 kg EQUIPMENT LiftMaster Compact 1530 AL21 Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit water-air Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Solid-state laser TruDisk 3001 with one LLC output Kdedpsz A S Dzofx Aldjt Light guide cable according to standard layout Laser cooling unit water-air Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine for height control and sheet metal edge detection Simple workshop programming Extended workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas pressure FastLine USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine enclosure with certified viewing window and door on the right Synchron loader Scrap removal device and double sheet detection Movable removal rake Loading and unloading station Separation of thin sheet metal for synchronous loader Raw material and unpacking station Extended pallet extension on the machine Inventory interface

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT Kdsdpfozyay Iex Aldot SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Connected power: 73 kVA Kdedjz Ahrwspfx Aldet Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg EQUIPMENT CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain