Condition: excellent (used), Year of construction: 2012, clamping force: 800 kN, Very good condition - 3K machine - shot 1 first- shot 2 from screw 2 in same inlet point as shot 1 - shot 3 as a normally 2K principle Extremely well maintained from big Danish manufacturer - more machines are available Cgeb Hn Rlovk Uhxsajt

Year of construction: 2005, Condition: ready for operation (used), Injection Unit Screw diameter 100 mm Ceb Hov Ir Azon Rlajgt Clamping Unit Opening stroke 950 mm Distance between bars 1020 x 1020 mm Additional Equipment Core Valve: 1 Air Valves: 2 EU 12 for Robot Connection This Netstal S 6000-5500E hydraulic injection moulding machine was manufactured in 2005. It features a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: good (used), Year of construction: 2005, 1x used Arburg 420C 1000-250 Cgsb Hn Rsuzwpqslaet Year of construction: 02/2005 Ma-No. 196692 Auger 30mm Installation height extended to 350mm Blow out: 1x Core pull: 1x Handling interface Master computer interface Printer interface Interface inking device The machine is sold without any other visible peripherals / tools!

Condition: excellent (used), Year of construction: 2005, Arburg ALLROUNDER 720 S 3200-2100 injection molding machine Year of manufacture: 2005 Closing unit Closing force: 3600 kN (increased at the factory) Clamping force: 130 kN Opening force: 100 / 800 kN Max. opening stroke: 700 mm Minimum mold height: 300 mm Max. distance between clamping plates: 1000-1400 mm Clearance between columns: 720 x 720 mm Dimensions of mold clamping plates: 1040 x 1040 mm Max. weight of the moving mold half: 3300 kg Ejector force: 100 kN Ejector stroke: 250 mm Hydraulics, drive, other Hydraulic pump drive power: 55 kW Total installed power: 88.9 kW Control cabinet Safety standard: DIN EN 60204 Socket set: 1 x 16 A Injection unit Screw diameter: 70 mm Screw working length (L/D): 20 Cylinder capacity: max. 280 cm³ Injection volume: max. 1078 cm³ Injection weight (PS): max. 984 g Injection pressure: max. 2000 bar Screw speed: max. 51 rpm Screw torque: max. 2247 Nm Nozzle pressure force: max. 90 kN Nozzle stroke: max. 600 mm Installed power of cylinder heaters: 6 x 4500 + 3300 W Installed power of nozzle heaters: 1000 W Machine dimensions and weight Net weight: 17000 kg Electric power supply: Motor + heaters: 125 A Heaters: 50 A Additional options Servo control technology with 2 control pumps Interface for robot system (according to EUROMAP 67, 50-pin) Electric axis control Interface for mold temperature control Interface for V24 printer Interface for PC keyboard ARBURG AES energy saving system Software package "Additional monitoring functions" Software package "Additional machine movements" Software package "Production control" Machine optimization / user support package Cgsb Hn Rljv Etaceajt Software package "Quality assurance" Documentation package

Year of construction: 2003, Condition: good (used), For sale is a 2 component injection molding machine brand Arburg and type 420 C Cgob Hnolwxpio Rlajt The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), Year of construction: 1998, Arburg 420C-1300-350 (186) Cebovnmc Aj Hn Rlaogt with conveyor belt, bimetallic screw General information Product Code: 186 Availability: In Stock Year of production: 1998 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,300 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 420 x 420 mm Platen size: 605 x 605 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 88000 h Weight: 4080 kg Dimensions: 4,5 x 2 m Hopper: No Core pull: Yes Euromap: Yes

Condition: excellent (used), Year of construction: 2008, clamping force: 400 kN, screw diameter: 30 mm, Very good conditions, extremely maintained from big Danish manufacturer 4 pcs available - feel free to ask for more information Cgob Hn Rlevk T Sveast

Year of construction: 2004, operating hours: 64,285 h, Condition: ready for operation (used), Injection Unit Ceb Hn Rlov Ir Aueasgt Screw diameter 100 mm Clamping Unit Opening stroke 950 mm Distance between bars 1020 x 1020 mm Additional Equipment Core Valve: 1 Air Valves: 2 EU 12 for Robot Connection: Yes This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Year of construction: 1995, Condition: good (used), MOVING conveyor (1995) Conveyor moving 1995 šírka - 130cm dĺžka - 200 cm Ceb Hnju H Uw As Rlasgt výška - 120 cm NASTAVITEĽNÁ

Condition: excellent (used), Year of construction: 2002, Krauss Maffei KM 80 -160 C2 injection molding machine Year: 2002 Control version: MC 4 Closing system: Clamping force: 800 kN Mould opening force, max.: 55 kN Moving platen feed force Opening: 31 kN Moving platen feed force Closing: 20 kN Mould platen size (h x v): 610 mm x 610 mm Distance between connecting rods (h x v): 405 mm x 405 mm Mould opening stroke: 500 mm Min. mould height: 250 mm Cob Hjv Dhnljn Rlaegt Max. daylight: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 20/11 kN Injection system: Screw diameter: 30 mm Ls/D ratio: 26 Injection pressure: 2025 bar Sweep volume: 85 cm3 Injection weight, PS: 77 g Electrical and hydraulic equipment Nominal pump motor capacity: 11 kW Installed heating power: 9 kW Adjustable barrel heating zones: 5 Number of drying cycles: 1800 1/h Tank capacity: 270 ltr. Dimensions and weight Machine dimensions: 3.81 m x 1.40 m x 2.00 m Total machine weight: 3200 kg Max. mold weight: 860 kg

Condition: good (used), Year of construction: 1998, operating hours: 105,191 h, Functionality: fully functional, machine/vehicle number: F41, clamping force: 250 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, displacement volume: 20 cm³, mold height (min.): 150 mm, opening stroke: 275 mm, plate width: 220 mm, plate height: 220 mm, overall weight: 1,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 58 A, Machine is in use. Can be viewed in operation. Peripherals are not included with the machine. Cgjb Hn Rlovrg Ugeaet

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Desma polyurethane processing plant, fully functional, in operation, converted to use KraussMaffei mixing heads, pumps 2x 16l Hydromatik, flow indicators, unregulated, electronic pressure switch and display, 12 programs, motor encapsulation, mixing head negotiable Ceb Hn Rlst A Uguoaegt

Condition: good (used), Year of construction: 2004, operating hours: 66,973 h, Functionality: fully functional, machine/vehicle number: 28109, screw diameter: 22 mm, injection pressure: 2,864 bar, total length: 2,270 mm, total width: 1,118 mm, total height: 1,800 mm, overall weight: 2,000 kg, heating capacity: 3.8 kW (5.17 HP), power: 11 kW (14.96 HP), input frequency: 50 Hz, input voltage: 230 V, input current: 80 A, Equipment: documentation/manual, Battenfeld injection molding machine in good condition, disconnected in mid-2024 to make room for a new machine in the department. Ceb Hnjvx Tfle Rlasgt Fully functional, with EEC declaration of conformity.

Condition: ready for operation (used), Year of construction: 2006, Main Drive Main motor power 55KW Stroke 600mm Injection Unit Screw diameter 65 mm Shot weight 1132g Injection pressure 2315 bar Clamping Unit Clamping force 270 ton Opening stroke 600 mm Distance between bars 620 x 620 mm Ejector stroke 200 mm Additional Equipment Core Valves: 2 Air Valves: 4 EU 12 for Robot Connection: Yes Main Drive Main motor power 55KW Stroke 600mm Injection Unit Screw diameter 65 mm Csb Hn Roupm R Selasgt Shot weight 1132g Injection pressure 2315 bar Clamping Unit Clamping force 270 ton Opening stroke 600 mm Distance between bars 620 x 620 mm Ejector stroke 200 mm Additional Equipment Core Valves: 2 Air Valves: 4 EU 12 for Robot Connection: Yes This Battenfeld TM 270 / 2800 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 620 x 620 mm and an opening stroke of 600 mm. Equipped with 2 core valves, 4 air valves, and an EU 12 interface for robot connection. A solid choice for enhancing production capabilities. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, screw diameter: 70 mm, displacement volume: 1,239 cm³, injection weight: 1,127 g, ejector force: 110 N, opening stroke: 1,400 mm, plate length: 1,090 mm, plate width: 1,180 mm, installation height: 850 mm, overall weight: 20,000 kg, heating capacity: 36.4 kW (49.49 HP), pressure: 199 bar, Core pulls 4 Sepro extraction unit SR Axels 20 S3 Year of construction 2006 Cob Hn Rlou Tdx Hjasgt

Condition: used, Year of construction: 2004, operating hours: 81,500 h, clamping force: 80 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 2,210 bar, overall weight: 5,200 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC 200/80 Power Condition: aus laufender Produktion Operating hours: ca. 81.500 CLAMPING UNIT: - Clamping force: 80 t Öffnungsweg: 450 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 670 x 600 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU200 Screw diameter: 30 mm Injection weight in polystyrol: 90 g Stroke volume: 99 cm³ Einspritzdruck: 2.210 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Csboqym Rgj Hn Rlajgt Air valves: ja / yes Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 5.200 kg Total size L x B x H: 4,0 x 1,4 x 2,0 m

Condition: excellent (used), Year of construction: 2019, Plasticizing system Krauss Maffei CX machine Cjbov Au T Ee Hn Rlasgt screw diameter 50 mm injection volume -432 ccm injection weight -393 g practically new - used for testing in the tool shop

Condition: good (used), Year of construction: 1998, machine/vehicle number: 8621090, overall weight: 27,000 kg, Year 1998 / Serial No. 8621090 Closing force 500 Tns / Mold table 1300 x 1200mm Max. mold opening stroke 810 mm Min/max mold height 400 - 880 mm / Max. mold weight 6700 Kgs Machine weight approx. 27,000 Kgs. Approx. dimensions 9500 x 2400 x 2500 mm Cgeb Hnovw A Efo Rlast

Condition: excellent (used), Year of construction: 2003, screw diameter: 70 mm, Injection molding machine Ferromatik Milacron MAXIMA 3500.2290 injection unit -Screw diameter 70 -Theoretical injection volume 1232 cm3 -Pressure 1857 bar -L/D = 22.9 - Lamination rate: 92 g/s Closing unit - Closing force: 3500 KN -Opening stroke: 1000 mm - Mold thickness: Mini 300 mm -Distance between columns: 710 x 710 mm - Tray dimensions: 980 x 981 mm -Ejection stroke: 160 mm Main Features -Total power installed: 105.7 KW Cgob Hn Rljimz U Esajt -NEW PUMP REXROTH -Machine dimensions: 6.80 x 2.02 x 2.60 m -Weight: 16000KG -Tank volume: 700 L Language : french , english , deutsche

Condition: used, Year of construction: 1998, Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Cgjb Hjvurhqon Rlaot Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2005, ENGEL DUO 3550H / 330L / 1000 2 F injection molding machine Cgsb Hn Rlov Au N Hjaet Year of manufacture - 2005 Clamping unit Clamping force [kN] 10000 Clearance between tie bars (hxv) [mm] 1400 x 1150 Min./max. mold height [mm] 492 - 1092 Maximum opening width [mm] 2292 Injection unit Screw diameter [mm] 105/30mm (screws with special barrier cover) Magnetic mold assembly tables Injection volume [cm3] 3053/100 Injection weight [g] 2775/90.9 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 45

Condition: refurbished (used), Year of construction: 2003, operating hours: 55,000 h, clamping force: 3 kN, screw diameter: 70 mm, New BOSCH/REXROTH pump Csb Houvgc Uen Rlaegt

Condition: good (used), Year of construction: 2001, Netstal S-2400-900 injection molding machine Year of construction 2001 CLOSING SYSTEM Closing force / (Ton) 240 Space between columns (mm) 630x630 Plate size (H x V) (mm) 907x910 Mold height (max-min) (mm) 460-800 Daylight between plates / Space between plates (mm) min. 460 Opening stroke / Opening stroke (max.) (mm) 0-510 Ejector force / Ejection force ( kN) 59.4 Ejector stroke / Opening stroke (mm) 175 INJECTION SYSTEM Auger diameter (mm) 55 Injection weight (Max.) (Material)(g) 456 (PS) Injection volume / (cm3) 475 Injection pressure (bar) 1890 Injection speed (cm3/s) 2375 Nozzle force / Nozzle force (Max.) (Ton) 88 Nozzle stroke / Nozzle stroke (Max.) (mm) 200 Plasticizing capacity / plasticizing capacity (g/s) 70 Number of heating zones / number of zone heaters 6+1 cooling Csb Hn Rjrbzbbslajgt Heating power / heating capacity (kW) 30.3 OTHER DATA Oil tank capacity (Liters) 420 Weight (kg) 15800 Dimensions (DxSxW) 6950x2075x2480 mm

Condition: excellent (used), Year of construction: 2004, Arburg 320K 700-250 Injection Moulding Machine Year of manufacture -2004 Cgobsq A Rp No Hn Rlajt Control - Selogica CLOSING UNIT Closing force (Ton) 70 Space between columns(mm) 320x320 Diameter of column (mm) 60 Plate size (H x V) (mm) 476x476 Mould height (Max.- Min) (mm) 400-200 Space between the platen (mm) 650 Closing speed (mm/s) 88 (l/min) Opening stroke (Max.) (mm) 250 Ejection force (kN) 30 INJECTION UNIT Screw diameter (mm) 30 Injection weight (Max.) (g) 89 Volume (cm3) 106 Injection pressure (bar) 1820 Injection speed (cm3/s) 121 Nozzle force (Max.) (Ton) 70 Nozzle stroke (Max.) (mm) 240 Plasticization capacity (g/s) 103.04 Number of heating zones 5 Heating power (kW) 6.1 OTHER DATA Oil tank capacity (Liters) 120 Weight (kg) 2190 Dimensions (LxWxH) (m) 3.37x1.405x1.99

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Cgob Hsk Rnq Non Rlaet Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW