Condition: repair required (used), Year of construction: 2003, REP rubber injection press 25 Tons Year : 2003 Cgshxoizi H Hj Arf Hjt The 4 columns are to be changed (9000€ of expenses)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 97,307 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 94 g, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Injection unit - plasticizing cylinder: B Screw diameter: 30 mm L/D ratio: 20 Specific injection pressure: 1,995 bar Displacement volume: 106.0 cm³ Injected part weight (PS): 94 g Max. dosing path: 150 mm Max. nozzle path: 200 mm Nozzle immersion depth (SVO): 40 mm Nozzle contact force: 60 kN Installed cylinder heating: 8.3 kW Filling hopper capacity: 35 L Total machine Oil tank capacity: 180 l Pump unit: 22.0 kW Installed total power: 30.3 kW Dry cycle rate according to EUROMAP 6a: 1.92 s - 259 mm Noise level (unpressurized circulation): 57.0 dB (AS) Noise level (power): 71.0 dB (AS) Switch-on time: 97,307 h Cylinder heating: 55,786 h Machine cycles: 3,160,294 Cohxov Exbls Arf Hogt Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: excellent (used), Year of construction: 2017, operating hours: 25,000 h, clamping force: 110 kN, screw diameter: 35 mm, clearance between the columns: 510,460 mm, mold height (min.): 150,450 mm, pressure: 2,400 bar, power: 6.6 kW (8.97 HP), Year: 2017 Type of control: CC300 Number of hours: 25,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Screw diameter: 35mm Screw length: 20D cm3: 168 Bars: 2400 Closing force: 110 T Opening stroke: 400mm Between columns: 510mm x 460mm Plate dimensions: 730mm x 680mm Cehx Arevrdttef Hsgt Mini/max mold: 150/450mm Max gap between plates: 850 mm Motor power: 6.6 kw Heating power: 4kw Closing weight: 6.6T Length dimensions: 5.10 m Width dimensions: 1.60m Height dimensions: 2.20m Cores: NO Robot interface: YES Bimetal: YES

Condition: used, Year of construction: 2006, operating hours: 60,000 h, Injection molding machine Krauss Maffei 50-180 CX Cshx Arfov Tmzps Hsgt Year 2006 screw di 30

Condition: defective spare-parts repository (used), Year of construction: 2007, Functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Cehxjrfbnms Arf Hsgt Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1982, Condition: ready for operation (used), Functionality: fully functional, Automatic rotary machine with 14 stations for the production of rain and safety footwear, single and two-color PVC materials .The machine after a major overhaul of the pneumatics and actuators and the first injection replaced with an electric inverter smooth regulation. The machine is ready for shipping. I will be happy to purchase men's galoshes from the Companies. Cgshx Aev R U Eksrf Hot

Condition: good (used), Year of construction: 2000, operating hours: 38,900 h, Functionality: fully functional, clamping force: 9 kN, screw diameter: 115 mm, displacement volume: 5,349 cm³, injection pressure: 1,600 bar, injection weight: 5,062 g, STORK 900 T injection molding machine Clamping force: 900 T Reference : SXN 9000-8600 Year : 2000 Screw diameter : 115 mm Max. material pressure: 1600 bar Injection volume : 5349 cm3 Injection capacity : 5062 g Injection speed: 599 mm/s Plasticizing: 123 g/s Distance between columns (H x V): 1010 x 1010 Column diameter: 190 mm Cgshx Arfoq Iyazj Hst Number of hours: 38,900 h

Condition: used, Year of construction: 2007, Clamping force: 12,5 t Screw diameter: 22 mm Shot weight: 31 g Shot volume: 34 cm3 Mould height: 100 mm Ejector force: 16 max. kN Screw stroke: 90 mm Injection pressure: 2000 bar Working hours: 42504 in automatic cycle Type: Vertical Drive: Hydraulic Cjhx Arfev Hxx To Hegt

Condition: good (used), Year of construction: 2005, operating hours: 59,000 h, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, clearance between the columns: 800 mm, displacement volume: 769 cm³, injection pressure: 2.2 bar, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 420-1900 C2 warehouse no.: 503535 manufacturer: KRAUSS MAFFEI type: KM 420-1900 C2 controller: MC 4 year of construction: 2005 operation hours: 59000 h technical data clamping unit clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 580 mm max. open daylight: 1300 mm opening stroke: 720 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 200 mm centering diameter of fixed platen: 200 mm weight of mould: 6700 kg technical data injection unit screw diameter: 60 mm swept volume: 769 ccm injection pressure: 2200 bar screw length: 23 l/d screw speed: 285 min plasticising rate: 70 g/s PS injection rate into the open: 700 g/s PS number of heating zones: 6 measures & weight measures of machine l x w x h: 6.83m x 2.33m x 2.48m total weight: 23090KG equipment included screen text german core pulling hydraulically 4x Cgshx Arfovitaqs Hot Machine without Handling machine without material hopper Anti vibration mounts mould heating 12x

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201815009051245, clamping force: 900 kN, screw diameter: 28 mm, clearance between the columns: 370 mm, column diameter: 420 mm, displacement volume: 67 cm³, injection pressure: 220 bar, injection weight: 61 g, mold height (min.): 150 mm, ejector force: 1,900 N, ejector stroke: 80 mm, opening stroke: 320 mm, total length: 4,310 mm, total width: 1,290 mm, total height: 1,920 mm, overall weight: 4,300 kg, type of input current: three-phase, pressing force: 90 t, For sale electric injection molding machine from 2018 in very good condition Cehx Arjv Sra Usf Hsgt

Year of construction: 2008, Condition: ready for operation (used), Ten injection molding machines are available. 1) Netstal SynErgy 1500/460, year of construction: 1998, clamping force: 140t, tie bar spacing: 510mm, platen dimensions X/Y: 750mm/750mm, max. opening stroke: 450mm, screw diameter: 45mm, injection volume: 255cm³, mold height min./max.: 250mm/550mm, max. injection pressure: 1753MPa, weight: approx. 9200kg, operating hours: 129131h. 2) Netstal SynErgy 1500/460, year of construction: 2007, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/750mm, max. opening stroke: 450mm, screw diameter: 45mm, injection volume: 255cm³, mold height min./max.: 250mm/550mm, max. injection pressure: 1753MPa, weight: approx. 11500kg, operating hours: 85445h. 3) Netstal SynErgy 1500/460, year of construction: 2006, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/750mm, max. opening stroke: 450mm, screw diameter: 45mm, injection volume: 255cm³, mold height min./max.: 250mm/550mm, max. injection pressure: 1753MPa, weight: approx. 11000kg, operating hours: 91159h. 4) Netstal SynErgy 900/230, year of construction: 2007, clamping force: 100t, tie bar distance: 410mm, max. opening stroke: 350mm, screw diameter: 40mm, min. mold installation height: 200mm, weight: 6800kg, operating hours: 73323h. 5) Netstal SynErgy 900/230, year of manufacture: 2007, clamping force: 100t, tie-bar spacing: 410mm, max. opening stroke: 350mm, screw diameter: 40mm, min. mold installation height: 200mm, weight: 6800kg, operating hours: 87883h.6) Netstal SynErgy 1500/230, year of construction: 2000, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/870mm, max. opening stroke: 450mm, screw diameter: 40mm, injection volume: 161cm³, min. mold installation height: 250mm, max. injection pressure: 1447MPa, weight: 11000kg, operating hours: 93464h.7-8) Netstal ELION Force 800-270, year of construction: 2008, clamping force: 80t, tie bar distance: 410mm, platen dimensions X/Y: 600mm/632mm, max. opening stroke: 350mm, screw diameter: 40mm, injection volume: 161cm³, mold installation height min./max.: 250mm/500mm, max. injection pressure: 1690MPa, weight: 7800kg, operating hours: 82400h.9) Netstal SynErgy 800/230, year of construction: 2005, clamping force: 100t, tie bar distance: 510mm, platen dimensions X/Y: 617mm/600mm, max. opening stroke: 350mm, screw diameter: 40mm, injection volume: 161cm³, min. mold installation height: 200mm, weight: 6800kg, operating hours: 97530h.10) Arburg Allrounder 370C, year of construction: 1997, clamping force: 370t, platen dimensions X/Y: 570mm/570mm, max. opening stroke: 500mm, screw diameter: 30mm, injection volume: 70cm³, min. mold installation height: 250mm, max. injection pressure: 1500MPa, weight: approx. umentation available. On-site inspection is possible. Cgohx Arfjv Amrmo Het

Condition: good (used), Year of construction: 2006, Krauss Maffei injection molding machine KM 350 - 2700 C2 Year of construction : 2006 Cgshomki Iusx Arf Hjt Control : MC 4 Technical details Clamping unit : Closing force : 3500 kN Mold opening force, max: 220 kN Moving force of moving plate Opening: 105 kN Moving force of moving plate Closing: 95 kN Size of mold plates (h x v): 1060 mm x 1095 mm Distance between columns (h x v): 710 mm x 710 mm Mold opening stroke: 920 mm Mold height min: 380 mm Max daylight: 1300 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejector force: 95 / 48 kN Injection unit Auger diameter: 80 mm Ls/D ratio: 20 Injection pressure: 1829 bar Displacement volume: 1433 ccm Injection weight, PS: 1304 g Injection speed: 513 ccm/s Screw speed: 218 1/min Maximum plasticization rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump motor capacity: 75 kW Installed heating power: 36 kW Adjustable barrel heating zones: 7 Tank capacity: 720 ltr. Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total weight of the machine: 15300 kg Maximum mold weight: 4780 kg

Condition: good (used), Year of construction: 2001, operating hours: 51,500 h, Functionality: fully functional, clamping force: 14 kN, screw diameter: 133 mm, displacement volume: 8,336 cm³, injection pressure: 1,600 bar, injection weight: 7,919 g, STORK 1400 T injection molding machine Clamping force: 1400 T Reference : SXN 14000-12500 Cgohxeq Iyb He Arf Hst Year : 2001 Screw diameter : 133 mm Max. material pressure: 1600 bar Injection volume : 8336 cm3 Injection capacity : 7919 g Injection speed : 771 mm/s Plasticizing: 143 g/s Distance between columns (H x V): 1300 x 1300 Column diameter: 220 mm Number of hours: 51,500 h

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Cjhx Aotrhv Ssrf Hsgt Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 800 mm, displacement volume: 1,047 cm³, injection pressure: 1.778 bar, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 420-1900/55 CZ warehouse no.: 503534 manufacturer: KRAUSS MAFFEI type: KM 420-1900 55 CZ controller: MC 4 year of construction: 2004 Cgjhsvirx Ejx Arf Hst operation hours: 76000 h technical data clamping unit clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 200 mm centering diameter of fixed platen: 200 mm weight of mould: 6700 kg technical data injection unit screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar screw length: 20 l/d screw speed: 527 min plasticising rate: 95 g/s PS injection rate into the open: 953 g/s PS number of heating zones: 6 technical data 2. injection unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³ Distance between sprayer 1 and 2: 300 mm (piggyback ) measures & weight measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG equipment included screen text german core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012030996, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Cjhx Arsv Sq Nujf Hsgt Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 195 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Condition: good (used), Year of construction: 1992, Closing force 500 KN Cshovygh Nsx Arf Hegt Screw diameter 30 mm Weight 3,200 KG

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Engel ES 80-25 HL-V injection molding machine Year: 1999 ES .../25 HL-V injection unit Screw diameter: 22 mm Specific injection pressure: 1590 bar Injection volume: 38 ccm Cshxjv R Txvj Arf Hegt Injection weight: 41.75 g ES 80/... Hl-V tool closing system Closing force: 25 t Tool plate dimensions: 470x280 mm Clearance between columns: ... mm Tool height: 480 mm Max. Plate distance : 150 mm Pump motor power : 5.5 kW Cylinder heating band power : 5.3 kW Machine dimensions : 2.8 m x 1.1 m x 1.9 m Weight : 1,800 kg

Condition: good (used), Year of construction: 2008, operating hours: 60,700 h, Functionality: fully functional, clamping force: 8,000 kN, clearance between the columns: 1,100 mm, BILLION bi-material injection press 800 T Cgjhx Arsvrfdaef Hjt Locking force: 800 T Reference: H780/4200 Year: 2008 - H780 injection unit: 45 mm screw - Injectable volume of 341 cm3 - Injection pressure of 2276 bars - sfcw shnH4200 injection unit: 80 mm screw - Injectable volume of 2261 cm3 - Injection pressure of 1863 bars Passage between columns (H x V): 1100 x 1100 mm Plate dimensions (H x V): 2400 x 1570 mm Max. mold thickness: 1300 mm Minimum mold thickness: 350 mm Max. opening stroke: 1100 mm Hydraulic cores: 6 Rotating base G4 270mm digital Machine dimensions: 10200 x 2730 x 3533 mm

Condition: good (used), Year of construction: 2016, Engel duo 23050/3200 (2017) Tie bar distance: 2240x 1800mm Min - Max mould: 1100-2000mm Screw dia : 160 mm Shot volume: 14480 cm3 CC300 controll Cgehx Arov Eviaof Hst

Condition: good (used), Year of construction: 2012, operating hours: 10,624 h, clamping force: 1,200 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 1.24 bar, ejector force: 16,000 N, ejector stroke: 100 mm, plate length: 400 mm, plate width: 710 mm, input frequency: 50 Hz, input current: 400 A, Equipment: documentation/manual, ENGEL insert 650H-120 injection molding machine Stock no.: 503503 Manufacturer: ENGEL Type: insert 650H-120 Control unit: CC200 Year of manufacture: 2012 Operating hours: 10624 h Technical data closing side Clamping force: 1200 kN Plate size h x v: 710 x 400 mm Installation height min.: 400 mm Plate distance max.: 750 mm Opening stroke: 350 mm Ejector stroke: 100 mm Ejector force: 16 kN Centering fixed plate D: 125 mm Technical data injection side Screw diameter: 50 mm Stroke volume: 392 ccm Cshx Arovbgw Hef Hegt Injection pressure: 1240 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 230 min Plasticizing flow: 343 g/s PS Number of heating zones: 5 Nozzle path: 550 mm Equipment On-screen text German On-screen text English Air valve 1x Leveling elements Closing side vertical Interface for inking unit Mold heating 8x

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012032351, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Cgjhx Aev Sq H Horf Hst Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 195 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 800 – 12000 MX injection molding machine Year of production - 2006 Closing system: - Mold closing force: kN 8000 - Mold opening force: kN 560 - Dimensions of the mounting plate (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection system: - Screw diameter: mm 135 - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Number of screw revolutions, standard/option: rpm 121/153 - Injection efficiency (standard) Electric-hydraulic equipment - Nominal power of the pump motor: kW 110 - Installed power of heaters: kW 57 Cgehx Ajtmq Akorf Hot - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (length x width x height): m 10.81 x 2.92 x 2.51

Condition: good (used), Year of construction: 2003, operating hours: 48,000 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 182 cm³, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 650 mm, plate width: 650 mm, total length: 4,470 mm, total width: 1,670 mm, total height: 2,180 mm, overall weight: 4,410 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 750 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503292 manufacturer: ARBURG Cgohxjvbgtno Arf Hjt type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 48000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201807012051958, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 186 bar, injection weight: 194 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 450 mm, plate length: 615 mm, plate width: 615 mm, total length: 4,820 mm, total width: 1,320 mm, total height: 2,120 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm Cgjhx Arfov Sq D Ej Hst INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 194 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 33 kW Machine dimensions (l x w x h) 4.82 x 1.32 x 2.12 m Machine weight 4.4 T