Used extruders & extrusion lines for sale (202)

Year of construction: 2014, condition: excellent (used), ANKELE 2 BAND CATERPILLAR BAP 375-70 1A Ijdpfxsu Skmws Aalohw

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 1183, VACUUM CALIBRATION TANK G&G VA 75-6 Chamber: 1 Pipe Diameter: Max 75 mm Length: 6 meters Ihsdpfxsrqz Auo Aaljw Feed: electrically back and forth Year of construction: 1992

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Ihedenq Di Tjpfx Aaljw Gz7iapb All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries...

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Ihedpfxexw Tumj Aalsw Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Ihedebqt Arjpfx Aalew Photos on request.

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D Iodpouziyhofx Aalehw - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Ijdpfxouhpiys Aalshw Good overall condition, very clean machine

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. Ijdpfx Aaev E Nwdjlohw for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8

Year of construction: 2000, condition: refurbished (used), • Manufacturer: SICA • Type : C800 • Year : 2000 • 6 caterpillar • Up to 800mm • Motor power : 8,5kW Ihsdpfxoix I I Ij Aalew • Great condition

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Iodew Hy Uuspfx Aalehw

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: 99031, DD Motor 27.9KW; 2655 RPM Automatic feeding system MAAG gear Pump; Type: EXTREX EX 28 - 4STE with control system MAAG; Type: MAAX 5 Input and Output pressure sensors (up to 350 Bar) on the gear pump Possibility to add Inox tank 2m length * 0.45m width with possibility to apply calibration system: - Equipped with vacuum pump, 8 exits vacuum collector and cooling collector with 8 exits. Ihodewqrpropfx Aalsw - Manual adjustments: right/left, up/down, forward/backwards

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Iodjpaiaiopfx Aalohw Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers Ihjdepah U Tspfx Aaljw INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: used, Year of construction: 1994, Film width: 1500 mm Thickness range: 25-200 Dosing system: Summit Garvimetric Screw: 90 mm Heating zones: 5 Heating power: 64 kWt approx. Driving system: D.C.11-110 KW Power: 415 Die head: fixed Diameter die head: 350mm Diameter of the gap: 1.25 to 2.25 IBC – yes Air ring type: optifil Die lip gap diameter: 2-50 Calibrating basket: yes with Ultrasonic control Motorized adjusting of calibrating basket in diameter / high: yes Take-off system: Oscillating Number of rolls: 2 Web guiding system: Yes Final roll width: 1650 mm Final roll diameter: 1000 mm Final roll maximum weight: 1 t Rewinder speed: 100 Thickness Control System: Optifil Micro perforator: no Filter changer: Yes(hydraulic) Electrical requirements: 400 A PLC: Siemens Simatic S5-100 U Trim removal system: Rollers Yes-Extract No Iodpjwgcw Sefx Aaljhw

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: P251001170, Complete extrusion line for ABS/PP furniture edge banding from the renowned brand AMUT The line is in perfect technical condition, regularly serviced, and currently in operation. The set includes a spare screw, further enhancing its operational value. Line equipment: 1. AMUT EA 100 extruder 2. AMUT calender station with CLV 1200 roller conveyor Ihsdpsxiu Npefx Aalsw 3. AMUT TRK 100 edge banding machine 4. AMUT edge winder 5. Calendar cooling unit with a complete set of hoses 6. Electrical control cabinets for the entire line Material: ABS, PP (virgin + regrind) Working width: 700 mm (after side trimming) Nominal width: 1000 mm Thickness range: 0.5 – 2 mm Extruder: single-screw AMUT EA100 33D Extruder output: ABS: 320 kg/h PP: 350 kg/h Final product: 2 rolls, each 350 mm wide Line speed: up to 25 m/min Year of production: 2009 Technical condition: perfect, complete with spare screw

Condition: new, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 2,880 mm, spindle motor power: 90,000 W, type of input current: three-phase, For sale: new compounding line with a real capacity of 300kg/h. The line includes hot and cold mixers, a twin-screw extruder (2 twin screw extruder) with two feeding points—at the start of the screw and from the side—suitable for high loading of dry substances. Features include a vacuum pump, hydraulic screen changer, vibro table, and storage silos for materials. The line can process powdered materials, hard materials, various grindings, mixtures, and granules of PP, PE, and PVC. It can produce high-quality masterbatch, fillers, and other products. Up to 85% dry matter content. The machine is practically brand new, only tested for a few hours. Control with frequency inverters. A set of spare parts, spare heaters, and spare screw segments is included. Possibility to test with your own materials. Ihsdpsx Uqyqofx Aaljw

Condition: used, functionality: fully functional, color: green, The calender consists of the following units: - A set of 4 rollers - A set of roller drives - Frames - A running gear - A control cabinet The set of rollers consists of 4 rollers of different diameters. The rollers are mounted on a common frame, which allows you to change their mutual position (change the gap between the rollers). The gap between rollers 1 and 2 is adjusted using adjustment screws driven by MRA-63 type worm gears. The gap between rollers 2 and 3 is adjusted manually by turning the adjustment screws. Each roller has an individual drive, allowing you to change the rotational speed. The rotational speed of the rollers and the thickness of the plate are set on the operating panel of the Calender control cabinet. A pressure roller and disc knives for cutting the outer edges of the plate are installed above the last roller (No. 4). The knife spacing is adjustable, which allows the production of boards of various widths. Roller diameter: Roller 1 – 515.00 mm Roller 2 – 315.00 mm Roller 3 – 315.00 mm Roller 4 – 355.00 mm Roller 5 – 95.00 mm Disc knife 6 – 200.00 mm - Roller width 230 cm Iodpjwcxufefx Aaljhw - Roller working width 210 cm - Total width 300 cm - Height 250 cm - Extruder departure / arrival (calender-extruder) 70 cm - Length with arrival 350 cm Power supply - 3 x 400 V (32A) - Motors 4 x 0.75 kW - Fans 2 x 0.25 kW - Pumps 2 x 1.1 kW - Access motors 2x 0.25 kW - Central pump 1 x 0.5 kW - Roller pressure motors 2 x 0.25 kW - Razor blade motors 2 x 0.15 kW

Year of construction: 1986, condition: used, functionality: fully functional, We are offering this used AMUT BA145 machine, manufactured in 1986. Manufacturer: AMUT Model: BA145 Year of manufacture: 1986 Condition: used Category ID: 452 Ihodpoyc Ni Sofx Aalew If you have any additional questions or require more information, please send us a message or call us.

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Isdpfx Aoxrb Hmealshw Head: • Blown film die head • Die diameter: 150 mm Die gap: 1.2 mm Output: Up to 100 kg/h, depending on material composition • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage The machine can be inspected in operation. Offered with spare parts.

Condition: new, Year of construction: 2016, operating hours: 9 h, functionality: fully functional, BMCtouch Integrated Automation System The control system, constructed in modular design, includes the following components: - PLC in industrial-standard design for machine control - Industrial PC for visualization and data management - Swivel-type operating and display panel with 19" TFT touch screen Performance Features: - User interface and functionality as per previous BMCtouch systems - Temperature control with self-tuning function - Pre-heating and start-up program - Prepared for data transfer to haul-offs with BMCsmart control systems - Operation of haul-off and saw from extruder terminal - CANopen Interface DS420 V2.0 - Flexible process display with individually configurable summary pages and customizable background - Configurable alarm management and alarm history - Trend data acquisition and presentation - Order management/administration - Configurable access authorization - Online assistance - Suitable for independent multi-user operation - Additional memory for history trends - Network capability - Modem Integration of Central Air Supply Co-extruder, BCE 1-30-25D - Stand-alone machine - Synchronization with main extruder via CANopen, DSP 420 V2.0 - AC drive incl. gearbox - Nitrided screws - BMCeco operator terminal - Product of battenfeld-cincinnati China branch Extruder, solEX 75-40 i Designed for pipe extrusion Technical Data: - Screw diameter: 75 mm - Effective screw length: 40xD - Drive power: 300 kW - Barrel heating zones: 5 pcs. - Barrel cooling zones: 5 pcs. - Total installed power, max.: 347.37 kVA Die heating zone incl. thermocouple (6 kW, 230 V) (BMCtouch control) Isdex Sbc Repfx Aalehw Extrusion Die, helix 500 VSI-TZ Designed for the extrusion of PO pipes - Two-step distributor consisting of smoothing thread and compact lattice basket - Base die and die set made of tempered steel - Material flow surfaces are polished - Pipe O.D.: 90 - 500 mm - Number of heating zones: 17 Co-extrusion ring for 4 color stripes Calibrating sleeve, type 6 For PO pipes vacStream 500-6 No. 1 Designed for calibrating and cooling of pipes - Closed stainless steel tank with welded feet - Tank on rollers with height and lateral adjustment - Rust-proof hinged lids - Central water inlet and outlet - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Mechanical vacuum control - Temperature display Technical Data: - Pipe diameter range: 90 - 500 mm - Number of solid taper nozzles: 162 pcs. - Number of spray rods: 6 pcs. - Max. vacuum: 0.7 bar - Length of vacuum chamber: 5500 mm - Total length: 5900 mm vacStream 500-6 No. 2 Designed for calibrating and cooling of pipes coolStream 500-6 4 For pipe cooling - Closed stainless steel tank - Base frame with height-adjustable feet - Rust-proof, hinged lid - Central water inlet and outlet - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Temperature display - Spray rods made of PVC - Solid taper nozzles with bayonet lock - Visual monitoring of pumps - Drip trays at inlet and outlet - Water circulation pump pullStream R_ 500-6 E Designed for pipe haul-off cutStream RTAplus 500 For chipless cutting of PO pipes

Year of construction: 1980, operating hours: 36,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Ihedpfx Aasvuquvolsw

Year of construction: 2025, condition: new, New PPR extrusion machine for PPR pipe starting from 20mm up to 40mm Ihodpfx Aaoyhh Udoljw

Year of construction: 2025, condition: new, New plastic pipe extruder machine with down stream pipe PE 100 or HDPE starting pipe diameter from 20mm till 65mm Ihjdpfxjyguzho Aaljw

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder Iodpfxjw Snlws Aaljhw • Water Cooled 130kW AC Motor and Drive. – Low Noise

Year of construction: 2023, condition: new, functionality: fully functional, Xtrutech XTS 35 for powder coatings (180-350 kg/hr) 1. PURPOSE AND MAIN FUNCTIONS OF THE LINE The extrusion line for powder coating production is part of a whole production process and is used for the production of polymer powder coatings. The extrusion line includes the following technological processes: formation of a homogeneous melt of heated powder coating by mixing, shaping of the melt, subsequent cooling of the product and its crushing into fine fractions. 2. LINE COMPONENTS - Twin-screw extruder type XTS 3. DESCRIPTION OF THE EXTRUDER COMPONENTS 3.1. Twin-screw extruder type XTS 35 The extruder for powder coating production consists of: - 24D hydraulically opening barrels at the top and bottom, providing quick access for cleaning, maintenance and emergency repair of barrel liners and screw element shafts. - Rectangular loading port for dosing of materials which are difficult to dose. - Robust high flow water cooled units with 5 electrically heated (aluminium bronze heating plates of 2 kW each) control zones that provide excellent temperature control. Maximum operating temperature is 350°C. - The barrel on the discharge side is equipped with a cooled discharge adapter and a knife. - Screws with screw elements. Screw speed 0 - 900 rpm. Water cooled AC motor power of 26kW. The stepless (PIV) gearbox is rated at 139Nm and protected by an automatic torque limiter. - Latch lock / quick-release coupling of shaft connection and toothed shaft. Mains supply voltage: 400±6%, 3 phases, 50 Hz (o+earth). Control: 24V. Water-supply: 70 l/min at 15°C and a coolant pressure of 4bar. Approximate dimensions: L=2250mm W=1000mm H=1600mm Approximate weight: 1600kg. Iedpswz Ntijfx Aalohw High-volume geometry D/d =1.8 AC motor power 26 kW Screw speed 900 rpm Average output 180 - 220 kg/h, max. 350 kg/h