Used Co Rotate Extruder for sale (34,875)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: Matricola: 40EV.147, The EBC40 HT/42D 600rpm extruder was manufactured by Comac (year of manufacture 2012). The motor is an AC motor with a power of 60kW. The extruder is equipped with an Omron-made PLC. The cabinet is fitted with an air conditioner. A degassing system with a 2.2kW liquid ring vacuum pump is included; the extracted gases are allowed to settle in a dedicated container for easy cleaning. The extruder is equipped with a twin-screw extrusion head, including a pressure and temperature transducer (newly supplied). Dedpfs Afnqcex Agrewd Below are the specifications of the proposed model: Screw diameter: 42 Screw speed: 600rpm Motor power: 60kW L/D ratio: 42 Effective penetration ratio: 1.5

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: Dedpfx Agezxxifsrswd CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Dwedpfx Aovy It Togred Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Djdpfozylxiex Agrjwd Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. Dedpfjzti Tkox Agrjwd This equipment has very few operating hours.

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm Djdpfon Utt Hox Agrewd * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels Dedoycuuyopfx Agrjwd • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 Dodewivdkjpfx Agrswd extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Year of construction: 2025, operating hours: 20 h, condition: like new (used), functionality: fully functional, Automatic Horizontal Flow / Pillow Packing Machine – Transparent Packaging Film Included – Excellent Condition The machine was purchased new in late 2025 from Anhui Dixin Machinery Technology Co., Ltd. specifically for our premium protein bar production operation. It has had very limited commercial use, is fully functional and in excellent condition. As a horizontal flow/pillow packing machine, it may also be suitable for: Protein bars, Energy and nutrition bars, Chocolate and confectionery, Snack bars, Biscuits and cookies, Bakery products, Other regularly shaped solid food products. The transparent film is included in the advertised price at no additional charge. Condition - Purchased new in late 2025, Very limited commercial use, Used in our dedicated food-production facility, Clean and well maintained, Fully functional, Excellent overall condition. Inspection & demonstration The machine is currently located in Wimbledon, London, United Kingdom. Available immediately. Inspection and demonstration can be arranged in London. Dwedjzy Abnepfx Agred We are selling also selling other equipment from our complete premium protein-bar production facility, including: Chocolate enrober with 30kg chocolate tank & 2.7m refrigerated cooling tunnel Protein/energy bar extruder and pneumatic cutter 60L Commercial chocolate melanger/refiner Commercial planetary mixer Stainless-steel production tables, sinks, racks and other food-production equipment Machines are available individually, or we can discuss a package price for multiple machines / a wider protein-bar production setup. Delivery: EXW Wimbledon, London, UK. Collection, loading, transport and installation are to be arranged by the buyer unless otherwise agreed.

Year of construction: 2023, operating hours: 14,000 h, condition: like new (used), functionality: fully functional, COMPLETE DRY ICE PRODUCTION LINE - 2 x COLD JET P1500 DrDryice offers a complete equipment package for dry ice production, bagging, storage, and distribution. 2 x COLD JET P1500 PELLETIZERS Year: 2012. Output: up to 546 kg/h each, approximately 1.1 tonnes/h combined. Pellet sizes: 3 and 16 mm. Recorded operating hours: 15,765.1 h and 14,271.9 h. Automatic hydraulic production, touchscreen controls, and interchangeable extrusion dies. 2 x CHART FEROX CO2 TANKS VT 25/22, year 2013. Stated capacity: 25 tonnes each. Pressure rating: 22 bar. Vertical liquid CO2 storage. 2 x DRY ICE BAGGING MACHINES Year: 2023. Bags: 1-5 kg. Stated output: 500 kg/h each. Power supply: 380 V, 50 Hz. OLIVO INSULATED CONTAINERS 100 x BAC 600: 600 litres, approximately 450 kg dry ice. Djde Aib Utepfx Agrowd Approximately 235 x BAC 420: 420 litres, approximately 300 kg dry ice. Silicone seals, insulated lids, and drain plugs. Payload depends on pellet size and filling density. Complete package located in Poland. Price on request. Current readings, condition, and final scope to be confirmed. Dismantling, transport, and installation by separate agreement. SEARCH KEYWORDS Comparable brands are search references; the offered pelletizers are Cold Jet P1500. Cold Jet, ColdJet, Cold Jet P1500, P1500 pelletizer, P1500 pelletiser, Cold Jet P750, Cold Jet P3000, Cold Jet P325, Cold Jet dry ice production, used Cold Jet pelletizer, ASCO, ASCO CO2, ASCO dry ice pelletizer, ASCO pelletiser, ASCO dry ice plant, TOMCO, TOMCO2, TOMCO Systems, TOMCO pelletizer, TOMCO pelletiser, TOMCO dry ice production, Triventek, Triventek pelletizer, Triventek pelletiser, Triventek dry ice machine, IceTech, Ice Tech, IceTech pelletizer, IceTech pelletiser, dry ice pelletizer, dry ice pelletiser, dry ice pelletizers, dry ice pelletisers, dry ice pellet machine, dry ice pellet making machine, dry ice production machine, dry ice manufacturing equipment, industrial dry ice maker, hydraulic dry ice pelletizer, automatic dry ice pelletizer, high capacity dry ice machine, high density dry ice pellets, commercial dry ice production, continuous dry ice production, used dry ice machine, second-hand pelletizer, pre-owned dry ice equipment, dry ice pelletizer for sale, complete dry ice plant, dry ice production line for sale, dry ice factory equipment, dry ice manufacturing system, bulk dry ice production, 550 kg/h pelletizer, 1100 kg/h dry ice production, 1 tonne per hour dry ice plant, 3mm dry ice pellets, 16mm dry ice nuggets, blasting pellet production, solid CO2 production, carbon dioxide pelletizer, dry ice bagging machine, dry ice bagger, dry ice packaging machine, dry ice packing machine, dry ice dosing system, pellet bagging line, 1 kg dry ice bags, 5 kg dry ice bags, CHART FEROX, Chart Industries, VT25/22, liquid CO2 tank, LCO2 storage tank, 25 tonne CO2 tank, bulk CO2 storage, OLIVO BAC 420, OLIVO BAC420, OLIVO BAC 600, OLIVO BAC600, dry ice container, dry ice storage box, insulated dry ice container, dry ice transport container, 420 litre container, 600 litre container, dry ice distribution, industrial gas equipment, cold chain logistics, dry ice weighing machine, dry ice filling machine, dry ice weighing and bagging system, dry ice film bags, dry ice shipping box, reusable dry ice container, insulated pallet box, dry ice suppliers, dry ice wholesalers, industrial cleaning supplies, food cooling, refrigerated logistics, DrDryice.

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Dode Agvygepfx Agrewd Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, 2 Kowin 232 extruder pelletizing lines for sale Dwedpfx Aez D T Nbegrsd one brand new 2024, second 2011 good working conditions output capacity 275Kg per H genuine reason for selling

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Dwodpfxjx Apcke Agrod

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR210 ± 120L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 15 Kw - 970 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 300L Single mixing shaft execution with adjustable paddles Dodpfxez Rl Ece Agrswd Motor 3 Kw Extruder BR210 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm without electric cabinet and controls

Year of construction: 2016, condition: as good as new (ex-display), Category: Twin-screw extruder Number: DE27621 Manufacturer: KraussMaffei Berstorff Type: ZE 110 R x 28D UTmi Dedoiux Nmjpfx Agrewd Year: 2016, like new, less than 100 operating hours Screw diameter: 2x Ø 127.0 mm L/D: 28:1 (extension of the processing unit possible) Drive/Motor: 250.0 kW (AC) – water-cooled Details: Co-rotating, screw speed: max. 300 rpm, degassing, 2x Busch vacuum pumps MM 1202 A VA3, segmented screws and cylinders, 1 x side feeder Berstorff ZSFE 120 – Control: Siemens S7 with screen control Does this offer not meet your requirements? Please visit our Plama website or send us your detailed request; we have a suitable option for almost every budget.

Condition: excellent (used), Year of construction: 2004, Complete Bandera extrusion line, diameter 110/27d, for window profile extrusion, with conical co-extruder Weber CE7, diameter 51/104. Metering units Calibrating table Vertical extruder for seals Haul-off unit from 2011 Dodpfxo Agc Huj Agrjwd Saw Receiving table

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Dwodpfx Aezw Ucxjgrsd Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Dwsdpfx Agozw Ug Rorod Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: like new (used), functionality: fully functional, machine/vehicle number: 25C862, SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: 25C862-OC - UPC Code: 00755652654278 - General industry - sealants, adhesives, silicones - Application: Beading and encapsulation - Maximum flow rate: 9 L/min - Maximum working pressure: 207 bar - Air inlet: 1/2" - Mixing ratio 1:1 - Pressure ratio 36:1 - For 20 L drums - Second-hand product, fully inspected Djdpfx Ajza Utqegrswd

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Dwsdexu Db Eepfx Agrod

Condition: used, functionality: fully functional, Used Lehmann UMT extruder. Suitable for a wide range of applications including food, biogas, substrates, wood fibre, and more. Contact for further information. Dwedsyxfg Tjpfx Agrjd

Year of construction: 2020, condition: excellent (used), functionality: fully functional, 1 x Ethercat servo-driven horizontal flighted conveyor. This conveyor has an advanced servo system with a matched drive and motor which only works off Ethercat plc systems. Perfect for accurate 'start / stop' work. Manufacturer - Jinan Hiwell Machinery Co. Ltd. Dwjdszdvb Nopfx Agrod Model - LPJ600-4. Serial number - 1661962. Date of manufacture - 2020. Belt dimensions - 3900mm L x 600mm W. Electrical requirements - 220 V / 50 hz / 1 phase.

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request Dwjdpsw S Ewqefx Agrod • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Year of construction: 1998, condition: excellent (used), Material: PE, PP, PS, ABS + filler materials // further details: co-rotating, degassing with SIHI vacuum pump, segmented screws and cylinder – Control: Siemens S7 with visualisation Dwedpfjiw Ibhex Agrsd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 06 00003 00112, screw diameter: 65 mm, TECHNICAL DETAILS Screw diameter: 65 mm Process length: total 40 L/D, divided into 24D + 16D Dwsdpfj Ah Ei Njx Agred Extruder drive according to datasheet: 45 kW MACHINE DETAILS Operating voltage: 3 × 400 V, 50 Hz AC control voltage: 230 V, 50 Hz DC control voltage: 24 V Rated current: 130 A Total power: 65 kW Maximum pre-fuse: 160 A Dosing speed: 102 rpm EQUIPMENT Single-screw extruder including the control system mounted on the frame and a die. Note: The machine is sold without a melt filter, water bath, and strand granulator.