Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Gkjdpfsvvkg Isx Aacec

Condition: good (used), Year of construction: 2025, • Additional interchangeable glue pot • PLC control (incl. touchscreen) • Hotmelt application onto the workpiece up to 3 mm jointing cutter • Jointing cutter (incl. DIA tool) up to 2 mm cutting depth • Maintenance-free glue pot with quick-change function, incl. glue discharge device • HF cross-cut saw station (approx. 12,000 rpm) • HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter heads (combination execution) • Corner rounding unit • Surface scraper (incl. pneumatic lift) • Free position (for cleaning station or radius scraper) • Robust chain feed Gedpfsxgfpzex Aacskc • Ball bearing mounted double pressure rollers (top pressure) • Inspection window on rear of machine • Extendable workpiece support • Feed rate approx. 10 m/min • Hebrock F4/09 radius scraper (incl. pneumatic lift) • Hebrock pneumatic 3-point adjustment (for radius, chamfer, or flush milling) Available from: immediately Delivery terms: ex works – EXW Berlin Payment terms: Payment before collection Accessories supplied without guarantee. The following applies: "Item sold as seen." The buyer is responsible for inspecting the completeness of the item on site.

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, composed of the following machines: OZ2050A) Loader (Double-cage, double pick-up) "MEINERT" Mod. P 415 D/B - L with central motorized rollers table. With two external roller ways to in-feed the piles (stacks) of panels to loader. OZ2050B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 440 / A / R3 Gkodpfxsxftt Eo Aacjc OZ2050C) Connecting Roller Table "IMA" Mod. IDK L/Q with turning device (from lengthwise to crosswise) with double cone system. OZ2050D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 590 / B / R3 OZ2050E) Connecting Roller Table "IMA" Mod. IDK Q/L with Turning device (from crosswise to lengthwise) with double cone system. OZ2050F) Unloader (Double-Cage, double storage) "MEINERT" Mod. P 415 D/S - L With central motorized rollers table. With 2 on-ground motorized roller ways to out-feed the piles (stacks) of panels from the Unloader.

Condition: used, Lange B90 KFE Edge thickness: 0.4 - 3 / 5 mm Control panel: PLC touch panel Pre-milling unit for pre-milling before the gluing section Automatic edge magazine for roll materials Teflon-coated quick-change glue pot for hot melt adhesive granules Workpiece height: 8 - 50 mm Finely adjustable glue roller Guillotine up to 3 mm for pre-cutting roll materials Pressure unit End trimming unit Multi-function milling unit for flush, radius and chamfer milling Corner copying unit for end edges up to 2 mm, switchable from the control panel Radius scraper blade Flat scraper blade Buffing unit Spraying device at infeed and outfeed Year of manufacture: 2018 The machine is FUNCTIONAL and in GOOD CONDITION Gkedpfxoxl Aw Tj Aacsc Ex works NET €17,000.00

Condition: ready for operation (used), Year of construction: 2015, This BRANDT OPTIMAT KDF 440 C was manufactured in 2015. A used edge bander ideal for processing straight workpiece edges, it supports edge materials from 0,4 to 3 mm and workpiece thicknesses from 8 to 60 mm. It features jointing, gluing, end trimming, multi-stage trimming, contour trimming, scraping, and buffing units. If you are looking to get high-quality edge banding capabilities consider the BRANDT OPTIMAT KDF 440 C machine we have for sale. Contact us for more information. Gjdpfexcb Sdex Aacekc Application Types Edge Banding

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 Gkodpfx Aasxducrscec - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) - Available from end of November/beginning of December 2025 Please feel free to contact us if you have any questions.

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Gjdsw Aim Espfx Aacokc

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, ANTIADHESIVE UNIT ADZ02 PRE-MILLING UNIT RT02 HYBRID GLUING HEAD TO USE GRANULATED EVA/PUR, with QM-703 PREMELTER FOR EVA GLUE AND NC GLUE FLOW CONTROL ADAPTIVE INFRA RED LAMP AdIRL-700 END TRIMMING UNIT IT70-S TOP AND BOTTOM TRIMMING UNIT RS-502 FINE TRIMMING UNIT RI-501 SLIDING UNIT FOR CORNER ROUNDING UNIT MULTIFUNCTION 2 MOTORS CORNER ROUNDING UNIT AR02 E EDGE SCRAPER UNIT RB02 GLUE SCRAPER UNIT RC02 CLEANING UNIT LPT02 BRUSHING UNIT SZ02 NC AXIS PACKAGE - AX-1: NC axis on the infeed fence. AX-1: NC axis on edge pressing rollers. AX-4, NC axes on Fine trimming Unit. Gksdoxfqypspfx Aacec AX-2, NC axes on Corner rounding Unit. AX-4, NC axes on Edge scraper Unit. MULTIPLE-SPEED KIT 12-18 M/MIN SUPPLEMENTARY LATERAL PANEL SUPPORT STRAIGHT AIR TABLE PRO-NESTING KIT KIT FOR DELICATE PANELS

Condition: good (used), Year of construction: 2005, 3 mm Workingpiece thickness from to 6-45 mm mm Total length 3250 mm Gjdpfx Aewxfnweacekc Feed speed 8 m/min. Weight 700 kg

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Gkjdpfx Aasxlz Nzscec Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Surface scraper unit - finishing Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00

Condition: good (used), Year of construction: 1989, Machine with full equipment Gedsf Ua R Hjpfx Aacjkc Length approx. 9 m Edge gluing Edge sawing Pre-milling Rounding milling Corner copying Pull scraper Buffing Corner copying

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A Gkjdpfsw Tq Iwex Aacjc

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Gksdpfx Aasw Aig Sscec Storage location: Customer.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Extendable workpiece support - Joint milling unit FG201 with 2 milling heads incl. DIA cutters - Fully automatic edge feed 1903 - Glue application system cartridge GlueJet 301 with automatic glue height adjustment (sensor-controlled nozzle) - Special accessory: pressure regulation of cartridge contact pressure - Pressure section 1912-3 pneumatic, first roller driven with pneumatic plunge control - End trimming unit 1918, pneumatic adjustment - Milling unit FR 201 multifunctional milling unit for flush, radius, and radius run-out incl. DIA cutters - Corner copying unit 1832 up to 3 mm edge thickness incl. DIA cutter - Scraper unit 1929 with 2 scraper holders - Chip collection box - Surface scraper 1964 Gkedsxavr Hspfx Aacec Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6 - 45 Edge thickness (mm): 0.4 - 3 Feed speed (m/min): 10 Total length (mm): 4630 Weight (kg): 1250 Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2004, operating hours: 10 h, functionality: fully functional, overall weight: 250 kg, compressed air connection: 6 bar, edge thickness (max.): 3 mm, workpiece height (max.): 60 mm, Selling a used SCM Contura molding edge banding machine. Year of manufacture 2004, as good as new, has approx. 10 operating hours. - Feed with one roller - Pressure rollers for straight parts (can be removed for shaped parts) - Heating rod for edge preheating - Glue basin with top and bottom heating - Chassis - Gluing thickness 0.5 - 3 mm - Workpiece thickness 12-60 mm - Workpiece length min. 230 mm - Feed speed 2-10 m/min You are welcome to view the machine at our warehouse in Oberteisendorf by appointment. Gkodpfxsu Apykj Aacsc Suitable transport can be organized. If you have any questions, please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 22.198, input frequency: 50 Hz, Showroom model Fully CNC-controlled edge bander, very comprehensively equipped: Pre-milling unit Gluing unit Front and rear cut-off saw unit Gjdew Ufuhspfx Aacokc Fine milling unit (top and bottom) Corner rounding unit (front and rear) Radius scraper unit Additional options available: Infeed roller for 2 types of edge bands, including solid up to 5 mm. R-8 N glue scraper unit. PC 19” touch screen (new). CNC-controlled infeed guide. Pre-milling unit with 65 mm high diamond tools. Pneumatic on/off. Infrared lamp at infeed. Universal feed rule. Antistatic at infeed (type Riepe) Anti-adhesive unit after the milling unit (type Riepe) Cleaning unit at outfeed (type Riepe) LED in the cabin. WiFi Kit unit. LED motion system. Duo Melt EVA/PUR glue unit. Nesting for panels with hinge holes. Automatic chain lubrication.

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on a Homag Edgeteq S-200, KDF 1130 FC (1100 kg). However, it will certainly also fit other machines, e.g. Brandt (may require slight modification). Gkodpfx Aajw S Dmdecoc Length of U-profiles approx. 1130 mm Build height incl. rollers approx. 150 mm 4 robust steel swivel castors with grease nipples 2 brakes 2 leveling plates for height adjustment The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "more offers from this seller".

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Gksdew Tivmopfx Aacjc Corner Rounding Unit: yes Operating Units: 9 nr

Condition: refurbished (used), Year of construction: 2024, Several used and fully overhauled Homag glue application units. All units are function-tested. - left hand side version Gkjdpfxstnh D Ej Aacoc - 1 unit as right hand side version available - QA 34 (QA65) - with or without new Teflon-coating (PTFE) - all wear and tear parts (bearings, seals, etc.) are new.

Year of construction: 1990, condition: used, edge heights: 10 - 60 mm edge band material thickness: 0,4 - 25 mm electr. connection: 380 V, approx. 9,9 kW Gedps T T Ddefx Aacekc space needed: 2900 x 870 x 1320 mm weight: 780 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, edge thickness (max.): 10 mm, overall weight: 1,980 kg, height adjustment type: electric, Biesse Type Akron 440 Year of manufacture: 2007 Noise rating according to manufacturer: 88 dB (A) Rated power: 13 kW Extraction capacity according to AUVA: 565 m³/h Technical specifications: - Edge thickness from 0.4 - 10 mm - Feed speed 12 m/min - Max. edge banding height 13 - 60 mm - Release agent - Jointing unit - Edge magazine - Preparation for PUR adhesive - Trimming unit, pivoting 0-15° - Pivoting bevel/radius unit RS-501 Gkjdpfx Aowahhpeacsc - Profile trimming unit - Radius scraper RBK 502 - Flat scraper RCC 701 - Buffing unit SP 501 - Electric height adjustment - Total connected load 13 kW - Machine length 4200 mm

Condition: excellent (used), Year of construction: 1977, power: 490 kW (666.21 HP), Polyma/Mercedes Benz 12-cylinder/generator set • Manufacturer: Polyma Maschinenbau • Model: PM 2467501 • Year of manufacture: 1977 • Power: 490 KVA • Mercedes Benz 12-cylinder engine • Total weight: 15,400 kg • German machine Gsdew Uiivepfx Aacekc

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Gjdpfx Aaswv Dfcecjkc Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: like new (used), Year of construction: 2018, operating hours: 1,139 h, functionality: fully functional, total length: 4,077 mm, overall weight: 1,000 kg, Edge banding machine Lange B 90 KFE - Single-sided automatic edge banding machine with - 7" color touch screen - Roller table 800 mm - Joining unit, 2 motors equipped with DIA cutter - Hot melt adhesive application to straight workpieces EVA-PUR glue pot Coated with discharge function at the bottom - Quick-change basin - 2 x release agent spraying Ripa - HF cross-cut saw station, - HF trimming unit, - corner copying unit, - chain feed, double roller top pressure, - extendable workpiece support rail, - Signal lamp for workpiece sequence - For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 - 3.0 and 5.0 mm - Workpiece height 8 - 60 mm - Workpiece width min: 75 mm - Feed speed: 8 -10.0 m/min; - Radius scraper - Surface scraper - Finishing unit - buffing - 2 x cleaning agent spraying Ripa Gedpfxsu D Htqo Aacekc - LED lighting inside - Extendable roller support - Total length 4077 mm - Weight approx. 1000 kg

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers Gkedpfjwkf Ihex Aacoc - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.