Condition: used, Year of construction: 1996, Polymacc edge banding machine mod. Rubber S.A. serial number PL-O-205 SA year of construction 1996 CE marked Godowlm Sqepfx Aacokc

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return conveyor and PU glue box, top condition Year of manufacture: 2010 Operating hours: 2,560 h Total edge length: 211,844 m Edgebanding thickness max: 12 mm Panel thickness max: 60 mm Coiled material thickness max: 3 mm Minimum workpiece width: 70 mm Feed speed max: 18 m/min Infinitely variable feed speed Motorized height adjustment Granulate glue system Premelting tank BRANDT QUICKMELT KD glue system 2 x PU glue tanks Strip magazine Joint milling aggregate End trimming unit with 2 motors Flush/radius/chamfer stations: 1 Corner copying unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing station Aggregates synchronized NC axis/axes Design: right-hand machine Machine length: 5,760 mm Conformity marking: CE mark Gsdpfx Aovnwf Ujacekc Ligmatech Boomerang return system PU glue box The machine is still in operation; inspection encouraged; available by arrangement No warranty Collection only, forklift available Net price plus VAT Price negotiable

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option - Heating time:ᐸ30Sekunden - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose Gksdpfx Aajd St R Sscoc - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Equipment: plate tape feeder guillotine glue tank (granulate) 3 pressure rollers finished cutting unit with balls 2 milling units for shaping edges (radial cutters) 2 polishers min. length of the workpiece 140mm min. width of the workpiece 60mm thickness of the glued element 10-55mm thickness of the edge tape 0.4-3mm support extending from the table engine power 5.6kW diameter of the extraction nozzle 120mm dimensions L/W/H 3480x1050x1020mm weight approx. 900kg Gjdpfsvtl Tqex Aacokc – unpainted – Austrian production – year of production 2007 – very good condition good – used edge banding machine Net price: 18900PLN Net price: 4450 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Factory overhauled by Lange Maschinenbau Minimum workpiece width approx. 75 mm Minimum workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Gkjdpfxew Sbblj Aacoc Joining unit with two counter-rotating, insert-controlled joining units Diamond tool height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cross-cutting unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Availability: Short term Location: Hochheim

Condition: new, functionality: fully functional, feed rate X-axis: 9 m/min, total length: 2,600 mm, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, warranty duration: 12 months, Automatic edge banding machine with bottom glue pot for hot melt adhesive (EVA), and, depending on the model, also suitable for polyurethane (PUR) on request. Features include a jointing/milling unit, corner rounding device, spraying system, and buffing unit. Feed speed: 9 m/min Panel thickness: 50 mm Edge thickness from roll: 3 mm Edge thickness solid wood strips: 5 mm Chain feed Prefeeding/jointing and gluing unit Corner rounding device Unit adjustment by sample edges or Unit adjustment by scale Simple and intuitive controls Machine equipment: Display: 7'' color touchscreen Option for programmable memory operation Graphical interface directly indicates processing result on the panel Single-click access to desired processing function Interchangeable glue pot 6 heating elements ensure guaranteed, uniform glue temperature Motorized glue application roller with internal electric heating element Teflon-coated glue pot for fast and thorough cleaning EVA & PUR in the same glue pot possible! (depending on model) Quick-change system for fast and easy glue pot replacement Teflon-coated glue pot for complete and easy cleaning Glue pot capacity: 1 kg Depending on adhesive type, two different temperatures with automatic standby function can be set Tool kit R = 2 mm Godpfxexanllj Aacekc Quick change between processing types: thin edges, radius, solid wood strip 2 HF motors 200 Hz, 12,000 rpm Flush trimming unit with multi-profile tool for thin edge and solid wood radius Nesting package optional Scraper unit Flat surface scraper Buffing unit Cleaning spray unit Electronically controlled spraying function 2 spray nozzles (top and bottom) and fluid tank LED interior lighting The LED interior lighting ensures safe machine adjustments even in low ambient light The complete price list will soon be available in German. List prices subject to our discount, which will be passed on to you. See the attached PDF document for all details. All machines available. Please note respective delivery times. Installation, training, and repair services provided by Bima throughout Germany. Contact us for more information :)

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Godpfx Aaeuvdzuecekc

Condition: ready for operation (used), Year of construction: 2016, Main Drive Number of axis 2 Additional Equipment Gkodew Sprrspfx Aacjc Radiator for preheating the edge of the workpiece Automatic PU Melting System Quickmelt 283.203: Melting capacity approx. 8 - 10 kg Pre-melting Container 283.201: Approx. 1 l, heating capacity 3 x 400 W Six-fold Edge Magazine: For roll material 0.3 - 3 mm thick NC Axis Vertical and Horizontal Adjustment: Equipped for precise adjustments Scraper Unit 08.521 and Buffing Unit 08.617-2: With motors 180 W, 50 Hz, 1400 rpm This IMA Novimat/Contour/I/G80/700/R3+ edgebander was manufactured in 2016. Consider the opportunity to buy this IMA Novimat/Contour/I/G80/700/R3+ edgebander. Contact us for more information. Application Types Edge Banding

Condition: as good as new (ex-display), Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min. Gkjdpfxjxh Spke Aacec

Condition: excellent (used), CATALOGUE NUMBER 7404 TECHNICAL DATA - min. thickness of the processed element 16mm - max. thickness of the processed element 60mm - height to the table surface 920mm - 1.2kW motor Godpfjt H E Ikjx Aacjkc - voltage 400V - plate - guillotine - tape feed rollers - glue tank - 3 guide rollers (including the first pulling roller) - worktop 1600x670mm - dimensions length/width/height 1600x1400x1100mm - weight 170kg ADVANTAGES - Polish production - for gluing straight and rounded edges - used machine, very good condition Net price: PLN 5900 Net price: EUR 1390 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2023, Demo machine Year of manufacture: 2023 Equipment and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Gkjdpfsw I Uytex Aacjc Extendable workpiece support 600 mm Long infeed fence 1252 mm Jointing milling unit with 2 motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edgebanding unit 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3 pneumatic Spray unit GM 201 after pressure unit End trimming unit 1918 pneumatic Extraction hoods for end trimming unit Combination milling unit FR201 with DIA cutters R=2 mm Profile trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short notice

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, total width: 1,060 mm, total height: 1,180 mm, filter area: 2 m², negative pressure: 550 Pa, volume flow: 3,600 m³/h, FELDER FSW 2000 mobile spray wall 3x400V 50Hz, 1.1 kW, air flow rate 3600 m³/h, pressure increase 550 Pa, exhaust diameter 300 mm, outlet throttle valve D-300 mm to smooth exhaust airflow, dimensions 2500x1060x1180 mm Suitable only for water-based paints Gjdpfx Aow Hcp Ujacokc NEW including accessories as shown in the picture

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-200-73-1332, total length: 11,640 mm, type of input current: three-phase, input voltage: 400 V, working height: 950 mm, input frequency: 50 Hz, Equipment: CE marking, NEW PRICE ONLY €185,000!!! Price valid only until October 30, 2025! Don’t miss the opportunity! We invite you to purchase the HOMAG EDGETEQ S-500 edgebander, manufactured in 2021 and delivered to our site. The edgebander was operated for exactly 3 years—from April 2021 to April 2024—in single-shift operation. It has approximately 5,000 operating hours, which for a machine of this class is equivalent to the typical annual use in a professional production facility. The edgebander is in excellent condition and requires only cleaning and routine minor servicing. Single-sided edgebanders for narrow panels, such as the EDGETEQ S-500, provide precise edge banding and flawless edge finishing. Options for PUR adhesive application and airTec technology are available on request. Adjustable feed speeds of 16–20, 25, or 30 m/min allow performance to be matched to the needs of small, medium, or high-capacity production sites. Automation and additional functional upgrades for these models can be configured to individual requirements. Gkodpfx Aaew E Npfscjc The offered machine was purchased from HOMAG in 2021. Its condition can be described as perfect. In the industry, neither the model nor the HOMAG brand needs introduction—they are recognized globally as leaders in the manufacture of advanced, high-quality equipment. This model is highly professional and a perfect complement for any large or modern production facility. Our machine is comprehensively equipped and includes virtually all options. Currently, a new EDGETEQ S-500 with this specification costs €284,959 net (PLN 1,210,000 net). All manuals and technical documentation are included. We maintain support from HOMAG in case installation and commissioning are required for the new owner. In our opinion, the discount offered—over 30% off the new price, amounting to approximately €84,705 net (PLN 360,000 net)—more than covers transportation and commissioning costs through HOMAG, and still results in savings of over €70,000 net (approx. PLN 300,000 net), which could be invested in another production machine. Furthermore, there is no need for the 6-month lead time typical for a new machine: this edgebander can be in your facility less than a week after purchase. General notes regarding this sale: • Although the machine is almost new and was manufactured in 2021, no warranty or guarantee is provided. • No returns will be accepted. • The listed price is exclusive of VAT (23% for buyers in Poland) which will be added to the invoice—please check the ad for price details; • Single owner. General note: We are not a furniture, manufacturing, or machinery trading company. We own numerous properties in Poland and are a developer building houses and apartments in Warsaw. The machines listed in this offer are our property. We acquired them as settlements from tenants operating in the furniture industry. We know their histories and conditions, which are as described. We are in contact with the manufacturers for further support (HOMAG, OMC, and FANUM). Since we do not need these machines, our prices are very attractive, especially given that the machines are virtually new. We can assist with transportation anywhere in Poland or the EU. Inspections prior to purchase are welcomed.

Condition: ready for operation (used), Year of construction: 2020, This FELDER G480 edgebander was manufactured in 2020. It features a feed speed of 9 m/min, tool diameter of 80 mm, and can handle panel thicknesses from 8 to 45 mm. The machine includes a premilling unit with a speed of 12,000 rpm and power of 2 × 1.1 kW, ensuring precise edge preparation. Additional features include a guillotine, pressure rollers, scoring cutters, a flat scraper, and a polishing unit. Contact us for more information about this machine. Application Types Edge Banding Gkjdexd H T Aopfx Aacjc

Condition: new, Year of construction: 2023, 0,4 - 5 mm Gksdpfxsxh Spde Aacsc Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min.

Condition: new, Catalog number: HZ014 – pre-milling – corner finishing – new machine, in stock – CE certificate – professional Gkodpfx Aaevviz Djcjc TECHNICAL DATA plate thickness 8-45mm edge thickness 0.4 mm – 3 mm min plate width 90mm min plate length 170mm feed speed 9m/min pre-milling 12000 rpm front/back milling 12000 rpm top/bottom milling 12000 rpm corner finishing 12000 rpm polishing 3000 rpm feed power 1.13kW glue tank heating power 1.315kW pre-milling power 1.5kW pre-heating power 0.4kW glue spindle power 0.25kW front/back milling power 0.22kW milling power top/bottom 2×0.37kW corner finishing power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working table height 960mm extended support width 560mm extraction connector 3x125mm dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner finishing, radial scraper and polisher ensures a high-quality end result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a 1.2 kg glue tank. Net price: PLN 98,000 Net price: EUR 23,060 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2011, Type KDF 220 C Year: 2011 Unit controlled via display Gluing unit End trimming saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 3 mm Workpiece thickness: 8-50 mm Feed rate: 10 m/min Total power: 9.5 kW Gksdpexc N Hvsfx Aacoc Length: 4150 mm Weight: 1150 kg €19,990 incl. VAT, stated on the invoice

Condition: used, machine/vehicle number: 006719, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Gsdeq Awliepfx Aacekc

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). Godpsw Ebrxofx Aacjkc (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Condition: ready for operation (used), Year of construction: 2015, This Biesse Akron 1440 was manufactured in 2015. It features a touchscreen control, joint milling, and a gluing unit with two Teflon-coated glue pans. It handles edges in rolls and stripes from 0.4 to 12 mm. Additional features include a snipping unit, pre-milling, rounding, and both profile and surface scraper blades. Consider the opportunity to buy this Biesse Akron 1440 edgebander. Contact us for more information about this machine. Application Types Godpfxjw Sazdj Aacekc Edge Banding

Year of construction: 2009, condition: like new (used), Glue tank Guillotine Cutting the front / back of the ball Milling up / down cutters R2 Material feed 11 m / min Gjdsidrd Dopfx Aacskc European CE certificate

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 450 mm, extraction connection diameter: 120 mm, workpiece width (max.): 690 mm, year of last overhaul: 2025, Equipment: CE marking, For sale: Felder FB-710 bandsaw with a cutting width of 690 mm. Available from December 1st. The machine also includes a table extension. The machine is used but in perfect working condition. We are selling this and other Felder machines because we are upgrading all our equipment. Technical data: Gkodoxdwchspfx Aacec - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5,120 mm - Weight: approx. 400 kg - Motor power: 5.5 HP - Year of manufacture: 2019 The bandsaw is located in Madrid and can be inspected at any time during our business hours. Sale subject to prior confirmation! Related terms: bandsaw, saws, saw, band saw.

Condition: used, Year of construction: 2017, functionality: fully functional, Single-side edge banding machine Type of applied edge: thin edge, thick edge Glue system: PUR Jointing unit: yes Multifunction unit: yes Top milling unit: yes Gkodpow Up Hnjfx Aacoc Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 10 pcs

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gkedpfx Aevxxuxeacec Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007825, Type of edging: Thin edge, Thick edge Gkjdpowk Uzksfx Aacec Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 24 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr