Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Gjdpex Nv S Ujfx Ahmjbr Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: new, Catalog number: HZ014 – preliminary milling – edge trimming – new machine, in stock – CE certificate – professional TECHNICAL DATA panel thickness 8-45mm edge thickness 0.4 mm – 3 mm min panel width 90mm min panel length 170mm feed speed 9m/min pre-milling 12000 rpm front/rear milling 12000 rpm top/bottom milling 12000 rpm edge trimming 12000 rpm polishing 3000 rpm feed motor power 1.13kW glue tank heating power 1.315kW pre-milling power 1.5kW pre-heating power 0.4kW glue spindle power 0.25kW front/rear milling power 0.22kW top/bottom milling power 2×0.37kW edge trimming power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working height of the table 960mm extended support width 560mm extraction connection 3x125mm Gbjdozrurijpfx Ahmsr dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 edge banding machine with pre-milling, saw cutting, top-bottom milling, edge trimming, radius scraping, and polishing ensures a high-quality final result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23571 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Gedpfsw Tfw Hsx Ahmebr Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer this excellent HEBROCK AKV 3005 DK-F Airtronic edge banding machine with solid edge band magazine, manufactured in 2014. Manufacturer: HEBROCK Model: AKV 3005 DK-F Gjdpfx Aezrm Dqehmobr Year of Manufacture: 2014 Condition: very good Category ID: 877 Type: Airtronic edge banding machine with solid edge band magazine Hebrock AKV 3005 DK-F edge banding machine (2014) – Fully equipped with Airtronic & Solid Edge Band Feeder An extremely well-equipped and production-ready edge banding machine. The machine is in very good condition; this specific machine is equipped with Hebrock’s Airtronic unit for zero-joint/laser-joint (hot-air system) and a solid edge band magazine for thick wood edges. The machine has a complete processing line, which means a finished result directly from the machine without the need for post-processing. Pre-milling: Double pre-milling cutter (joint milling) with diamond tools for a perfect cutting surface. Gluing system: Traditional glue application (hot melt) + Airtronic unit for seamless zero-joint. Magazine: Automatic edge band magazine, also optimized for solid edge bands. Cutting: 1 high-precision cutting blade. Milling: Upper and lower milling unit for radius and bevel milling. Corner rounding: Integrated corner copying/corner rounding for finished corners. Finishing/Post-processing: Profile scraping (radius scraper), flat scraping (surface scraper), and polishing unit. The machine handles everything from thin rolls (ABS/PVC) to thick solid wood edges. Thanks to the Airtronic system, you can achieve the sought-after "invisible joint" required in modern furniture manufacturing. The machine can be demonstrated in operation by appointment. The buyer is responsible for removal and transport. VAT will be added to the price. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Printing unit Trimming unit Multifunctional milling unit Copy milling unit Radius scraper unit Flat draw blade Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Gsdpfxszk N Euo Ahmsbr Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 Features and technical specifications: At 5,500 mm in length, the Quadromat is the shortest edge-processing machine capable of complete processing of edge banding materials with an integrated workpiece return mechanism . Not only are the longitudinal edges milled within the machine, but the end edges are also profiled, thereby completing the machining process. Gbedpfx Ahozk Nr Uomsr The finished workpiece is returned to the operator, no manual reworking is required. With PLC control, with up to 20 machining programmes Workpiece dimensions: – Minimum width: 60–80 mm (depending on the edge material) – Minimum length: 150 mm - Workpiece thickness: 10–50 mm - Glue bar thickness: 0.4–12 mm – minimum edge banding length: 400 mm Feed rate 18 m/min with 2 jointing motors with multifunctional milling unit (flush, chamfer, radius) with scraper blade with cross-cut saw with 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection: 7–10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers Gjdpfxozk Nmrj Ahmebr - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2006, Second-hand machine Year of manufacture: 2006 Condition: fully overhauled Features and technical specifications: - with new glue application system - Feed guide manually adjustable - Milling unit 1961 - Edge feeder 1903 - 1906 adhesive application station with sensing nozzle - Pneumatic printing unit 1816 - Trimming unit 1822 - Milling unit 1942 M: Radius, chamfer, flush - Complete blow nozzle - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Extraction hood set - Complete protective hoods - Total length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Glue applicator thickness depending on configuration: 0.4–5 mm - Max. edge banding height: 55 mm - Edge banding strip length: min. 350 mm - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed rate: 12.5 m/min - Extraction: - Joint milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: Godpfx Aszk Nlhjhmobr - Joint milling unit: 1,490 Pa - Milling unit: 1650 Pa - Minimum air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Edge banding thickness: 0.4 - 3 mm Edge banding height max.: 51 mm Edge banding strip length min.: 350 mm Edge banding overhang in height per side max.: 3 mm Workpiece width min.: 60 mm Gbodpfxey Dd Iye Ahmjr Workpiece length min.: 180 mm Overall length: 3700 mm Width: 1440 mm Height max.: 1970 mm Workpiece infeed height: 850 mm Weight: approx. 850 kg Storage location: Nattheim

Condition: used, machine/vehicle number: 008519, Type of edging: Thin edge, Thick edge Gluing System: PUR, Laser Premilling Unit: yes Corner Rounding Unit: yes Gsdpfozruytox Ahmjbr Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Gbjdpfx Ahjyzxa Esmsr Buffer Return system TFU140

Condition: excellent (used), CATALOG NUMBER 7729 TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging Gsdpfszh H Insx Ahmebr - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW Gbsdpfszccuuex Ahmer - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: Gedszlbpzepfx Ahmobr - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-261-07-3237, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, actuation type: electric, total height: 1,580 mm, total length: 4,860 mm, total width: 1,130 mm, overall weight: 1,630 kg, Equipment: CE marking, documentation/manual, I am offering a professional edge banding machine from Brandt, model Optimat KDF 430. * Brand: Brandt (HOMAG Group) * Model: Optimat KDF 430 * Year of manufacture: 2008 * Functions: Edge banding with EVA glue * Second glue tank for color changes * Diamond pre-milling cutter * Trimming unit * Pressure rollers Gjdpfx Ahszrtbpsmjbr * Circular saw for length trimming * Milling unit, top/bottom: rounding, chamfering, flush trimming * Corner rounding unit * Profile trimming blade * Surface trimming blade * Max. workpiece height: 60 mm * Max. edge thickness: 6 mm solid wood The machine is fully functional and ready for operation! Available from week 40/2026. Please feel free to contact me if you have any questions.

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350 Gjdeznu Dwepfx Ahmjbr

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: Gbodpfx Ahjzk N U Aomer - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Gedpfx Ahszk N Hrjmobr Condition: well-maintained Features and technical specifications: Machine with PLC control Feed rate: 12/16 m/min Edge feeder for roll and strip material, automatic 1901 Glue application unit, cartridge 1906, with sensing nozzle Pneumatic pressure unit, motorised adjustment to edge thickness 1926 Trimming unit, twin-motor, pneumatically swivelling 1918 Rigid milling unit up to 30 mm, 1962 MOT 5 milling unit with multifunction capabilities: flush, radius, chamfer, 1966 Radius scraper 1927 Corner copying machine 1983 Surface scraper 1964 1944 sanding unit Blow moulding nozzles Technical specifications: Workpiece thickness min./max.: 6/60 mm Workpiece width min. 60 mm Minimum workpiece length: 140 mm Maximum gluing thickness: 13 mm Weight: 1,350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: at short notice

Condition: used, Year of construction: 1989, Second-hand machine Small machine for moulded part machining The machine processes hot-melt adhesive-coated edging material, which is reactivated using hot air The workpiece is automatically fed by pressing it against the central, driven pressure roller, which ensures uniform adhesive reactivation and thus reliable bonding Thermostatic temperature control via a dial thermostat Maintenance-free three-phase hot-air blower for continuous operation Automatic airflow deflection Pneumatically operated roller cutting device cuts even the toughest veneer and PVC edging Foot switch for moulded part processing Workpiece thickness 10–50 mm Heating capacity 3 kW Connected load 3.3 kW Workpiece width min. approx. 25 mm Edge thickness approx. 0.5–1 mm Minimum internal radius approx. 25 mm Gbjdpfxozk N Ehe Ahmer Feed rate 4 m/min. Pneumatic pressure 6 bar Weight approx. 105 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2013, Second-hand machine Year of manufacture: 2013 Features and technical specifications: - Control system with 15 -touchscreen - Joining milling unit with 2 milling heads - Edge feed - GluJet 301 adhesive application system: 2.3 kW, automatic adhesive height adjustment, feel-feed nozzle - Pressure unit: pneumatic - Cross-cut unit: pneumatic - Diamond cutters (left and right): with CM technology - Corner copying unit with diamond cutters - Surface scraper blade - Sanding unit - Extendable workpiece support - Motorised pressure bridge adjustment with NC axis via programme control - Extraction hoods for cross-cut unit - Multifunctional milling unit: MOT 4 - Vertical feeler rollers: pneumatic - Pneumatic swivel mechanism for MOT 4 milling unit - MOT 2 draw-knife unit with chip collection box - Spray system for the infeed and outfeed areas - Minimum workpiece length: 160 mm Gbodpfjzk N Dkox Ahmor - Workpiece thickness: 6–60 mm - Edge thickness: 0.4–6 mm - Feed speed: 10 m/min - Overall length: 4,930 mm - Weight: 1,420 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1990, Second-hand machine Year of manufacture: 1990 Godpfx Ahszk N Amsmjbr Features and technical specifications: - Automatic edge feeding - Cartridge gluing system - 4-roller pressure unit - Cross-cut saw unit - Flush milling unit - Combined milling unit for flush, chamfer and radius - Radius scraper blade - Sanding unit - Edge banding thickness 0.3–20 mm - Edge banding height: max. 66 mm - Edge banding length: min. 200 mm - Feed rate 8/16 or 12/24 m/min Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Control system with LCD display swivelling control panel Programme memory Manual pressure bridge adjustment Feed via conveyor chain Extendable workpiece support Joint milling unit 1961 : - 2 x 2.0 kW - Diamond jointing cutters in synchronous and counter-rotating operation, Edge magazine 1903: Gedpfxozk Nwwj Ahmebr - Support plate 820 mm, max. loading capacity 40 mm - automatic feeding of roll and strip stock Glue application system 1906: - Cartridge system with sensing nozzle – with automatic reloading - PUR adhesives can be used Printing unit 1816: - with powered roller - pneumatic control of the printing unit Trimming unit 1918: - 2 x 0.22 kW - swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - for flush, radius and chamfer milling - motorised adjustment - Blow nozzle on the milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, post-forming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edging up to 3 mm - Chip collection box for radius scraper Surface planer 1964: - application-controlled surface scraper - Air nozzle on the surface scraper Buffing unit 1940 Edge thickness (roll stock): 3 mm Edge thickness of strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Workpiece support clearance: 470 mm Support plate diameter for edging material: 800 mm Trimming blade for roll stock up to: 3 mm Heating-up time: 3.5 min Power of jointing cutters: 2 x 2 kW Cross-cut saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Power for corner copying: 0.22 kW Extraction nozzle for joint milling unit: 120 mm Extraction nozzle for milling unit: 70 mm Extraction nozzle for scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: at short notice

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - MAGELIS control system - for EVA-based hot-melt adhesives - Jointing: 2 × 1.5 kW, u = 12,000, 200 Hz - Cross-cut saws: 2 x 0.2 kW, automatic tilt 0°/3°, 2 carbide-tipped saw blades 140 mm - Flush milling: 2.07 kW, with WPL HF 70 heads, diameter 70 mm - Radius milling: R2 - Radius scraper blade - Surface scraper blade - Top glue tank - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8–42 mm - Minimum length: 150 mm - Edge thickness: 0.2–6 mm - Feed rate: 12 m/min - Extraction connection: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Gbjdozk Nt Eepfx Ahmer Availability: at short notice Storage location: Baden-Württemberg

Condition: used, Year of construction: 1983, Second-hand machine Year of manufacture: 1983 For pre-coated edge banding material Gbodjzk Ntljpfx Ahmsr Edge banding up to 1.3 mm with roller trimming with flush trimming using a blade with flush milling/chamfer milling top/bottom with HF motors Location: Röllbach Availability: at short notice

Condition: good (used), Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, Gsdpfjwqmfuex Ahmebr -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg