Used edgebanders for sale (578)

Condition: used, Storage location: Sonnefeld Ncsdpfxjway Dcj Aiyju

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Njdpfx Aiovvkd Tsyecu Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Ncsdpfx Ajvvkfdeiyeu

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Ncodpfx Aovvkfqsiyou Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Nedpfxjvvkfwj Aiyscu

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Ncodjxyiilspfx Aiyeu Storage location: Nattheim

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Njdsymcrbspfx Aiyscu Storage location: Nattheim

Condition: used, machine/vehicle number: 005335, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Njdey I Trcjpfx Aiyocu Corner Rounding Unit: yes Grooving Unit: yes Maximum panel thickness: 60 mm Operating Units: 13 nr

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Nodpfx Ajx Swf Usiyscu Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: used, machine/vehicle number: 008554, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Ncsdpfxjzg D Ezj Aiyou Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Nedoy Dq Iajpfx Aiyjcu Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 008325, Position 1: Single Edgebanders HOMAG-EDGETEQ S-390 - LOOPTEQ O-300 Nodpfxex Hpklo Aiyocu Position 2: Panel Return Systems HOMAG-EDGETEQ S-390 - LOOPTEQ O-300

Condition: used, machine/vehicle number: 008552, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Nedpjzg D D Defx Aiyscu Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650 Ncjdpfx Aiex A Thqjyou

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B AIRTEC Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B AIRTEC Ncsdpfswukywsx Aiysu

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05 Nedpex A Hi Ijfx Aiyocu

Condition: used, machine/vehicle number: 008250, Position 1: Single Edgebanders BIESSE-STREAM B1 9.0 Position 2: Roller Conveyors BIESSE-STREAM B1 9.0 Njdpfx Aex Dipmoiyocu Position 3: Single Edgebanders BIESSE-STREAM B1 9.0

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Nsdjw Tq Iwjpfx Aiyocu Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A

Condition: used, machine/vehicle number: 008148, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Ncsdpextugcefx Aiysu

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 18.5" touchscreen control panel, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed fence, 1350 mm MOT Edge magazine, fully automatic for coil and strip material, MOT Gluing station GLU-JET cartridges – hot melt and PU adhesive, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle Press unit 1913 mot., motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of 0-10° bevel on the miter saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius trimming Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end faces, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as anti-static agent at the press unit Infeed area, electronically controlled release agent spray device Nedpfxszdzlme Aiyocu Press unit, electronically controlled anti-static spray device Outfeed area, electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is FACTORY REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Ncedpezf Ircefx Aiyju Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with descriptive content. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Feed rate max.: 10 m/min Ncedpfx Aszf Id Ssiyou Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel splitting/milling units: 1 Number of edge processing units: 4 Gluing system: EVA hot melt adhesive The machine consists of the following processing units: Panel splitting/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Trimming Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Pressure roller Pressure with idler rollers Panel support guides Edge roller magazine Glue pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8570

Condition: new, Year of construction: 2024, functionality: fully functional, power: 3.6 kW (4.89 HP), input voltage: 230 V, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: mechanical, overall weight: 11 kg, compressed air connection: 6 bar, working height: 65 mm, The perfect zero joint - for laser edgebands / hot-air edgebands / co-extruded edgebands - Up to 65 mm edge height - Up to 3 mm edge thickness - Mobile or stationary use - Tool-free changeover - Up to 3 mm edge thickness - approx. 4 min heating time - 230 V / 50 Hz Njdpfxer H Eale Aiyocu

Condition: used, Year of construction: 2008, machine/vehicle number: T/41288, functionality: fully functional, power: 19.5 kW (26.51 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 14 m/min, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2008. Type: TORNADO-TOP Machine No.: T/41288 Year of manufacture: 2008 Power type: 3~ N+PE Ncedpfx Aiszd Dvzsyeu Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 19.5 kW Control voltage: 24 VDC Maximum fuse rating: 35 A – 5×6 mm² Weight: If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), BRANDT optimat kdf350C edge banding machine Pre-milling cutters Edge gluing with a roller Pneumatic pre-trimming cutter Pressure rollers Final trimming cutters R1-R2 top and bottom milling unit Corner rounding unit Profile edging unit Flat edging unit Max. element height 50mm Max. veneer thickness in roll 3mm Njdpfx Aiozfyyreyecu Feed rate 11m/min Machine length 390cm Machine inspected, very good condition Ready for operation