Used miter saws / chop saws for sale (128)

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Year of manufacture: 2022 Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Cutting waste: max. 300 Operating voltage: 400 V 50 Hz Oil filling: HLP-D-32 Gsdpfx Aox Dmavsayjca Tank capacity: 70 l Pressure: 70 bar The machine is unused and dismantled. Inspection possible at any time.

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting fixed lengths according to cut lists and cutting out defective sections Cutting cycle: Defect trimming via chalk marking Cutting to fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths with single piece loading WS.1 Through-feed crosscut saw 4 pcs. lower feed rollers Godjx Da Tvopfx Aayeca 1 pc. loading table, 2 meters, right side, with dual marking table 1 pc. outfeed table, 1 meter, with rear stop Roller height adjustable manually 12 pcs. luminescent chalk sticks Cutting capacity: Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming options: - Defect trimming via marking - Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension 100 storage slots for cut lists Detection system for the last two pieces to be cut and the following piece Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional) Technical specifications: Feed system adjustable by motor, brushless and with toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting cycles per minute up to No. 100 Minimum workpiece length 550 mm Minimum workpiece width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with dual marking table ZA110 Outfeed table ZA058 TCT saw blade Ø 500 mm ZA296 Motorized adjustment of roller height

Condition: used, Year of construction: 2025, Dimensions (L/W/H) 6400x1500x1780 mm Gcjdpfxjwt Ua Eo Aayja Total power requirement 19 kW Weight 1800 kg Arbeits- und Platzersparnis, sicherer binierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie.

Condition: new, Year of construction: 2024, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Weight 490 kg Gsdocnz Rvjpfx Aaysca Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.

Condition: used, Year of construction: 1997, 1 unit mitre saw ELEKTRA BECKUM HOPPY MASTER KS250 Brand: ELEKTRA BECKUM HOPPY MASTER KS 250 Model: HOPPY MASTER KS250 Colour: blue Year of manufacture: 1997 Accessories: with base frame Location: warehouse Gjdpjx A A Sljfx Aayeca Condition: used

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Gcsdpfxew Sy T He Aayja Storage location: Nattheim

Condition: excellent (used), Catalogue number 7800 TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 80 mm - Max. workpiece diameter with 400 mm blade: 130 mm - Motor: 9.2 kW Gcedpfxjxr Dd Is Aayoa - Feed motor: 4×0.3/0.45 kW - 2 feed speed options - Material clamps: 6 pcs (including one pneumatically adjustable) - Dimensions (L/W/H): 4650x1120x1280 mm - Weight: approx. 1000 kg ADVANTAGES – for palisade production – easy to operate – used saw, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR based on exchange rate 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Gjdpfx Aaoxvh E Rsysca On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10,2 kw Gedpfxev A Htke Aaysca

Condition: new, Year of construction: 2025, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Gcodpsw Hl Aqefx Aaysa Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: good (used), Code: 0239 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard Gcodpoxv Su Asfx Aayea Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Pair of vertical cylinders for cutting optimisation management Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with saw table sliding and repeted cut mm 200 x 760 Maximum ripping height mm 300 Cutting precision : +/- 2 mm on 10 mt beam (straight beam ) - +/-0,2° on rotation edge of the table - +/-0,2° on inclination angle of the blade Control by industry-standard PC Touch- Screen - Windows Operating System - USB ports - Ethernet Rollers: : n° 3 idle rollers benches mt. 2 with rollers diameter 133 mm Widia blade diameter 800 mm Compressed air 6/7 bar Machine weight kg 2900 Total weight kg 3250 (Machine + roller benches)

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Gcsdpfow Sadrsx Aayea

Condition: excellent (used), Catalogue number 7837 TECHNICAL DATA - Max. blade diameter: 450mm - Spindle diameter: 30mm - Top pneumatic hold-down - Blade guard - Blade guard also functions as a hold-down - Pneumatic blade stroke - Cutting height: 125x125mm, 100x250mm - Cutting capacity (thickness x width): 50x530mm, 100x480mm, 150x380mm, 200x200mm - Main motor: 5.6kW - Extraction port diameter: 100mm - Table dimensions (L/W): 660x480mm - Table height from base - 2 roller tables - Infeed roller table with guide: 1500mm - Outfeed roller table with guide and latch: 1500mm - Roller width: 300mm - Working pressure: 8bar - Overall machine dimensions (without roller tables) L/W/H: 940x780x1150mm - Weight approx. 450kg ADVANTAGES – German manufacture Gcsdpfsx Arhcsx Aayea – DTR documentation – 2 roller tables – Pneumatic blade stroke – Saw used, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on exchange rate 4.2 EUR) (Prices may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 035-123781, Used Gama 63 K3 machine in working condition. All details can be found in the photos and PDF files. Gsdpex Ev Ubofx Aayeca

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1000 kg Gcedjv A Htdjpfx Aaysa Total power requirement 8,5 kw

Condition: used, Year of construction: 1996, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Hold-down device: yes Gcodpfxoxu Dhxs Aayea Machine length: Machine width: Weight: 300 kg

Condition: good (used), Year of construction: 1997, Under-table cross-cut saw max. cutting width: 800 mm max. cutting height: approx. 150 mm saw blade: 550 mm Gcodpfextwk Djx Aaysa with 2 roller conveyors, the right one with stop and measuring scale

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Gjdpfx Aoxnlgceaysca Storage location: Garbsen

Condition: used, Year of construction: 2022, Heavy duty rack and pinion push feed system 6000 mm in feed capacity Ø600 saw blade 10 hp saw motor Automatic angle setting (+70 - 70 degrees ) Vertical Clamping Horizontal clamping Electrically interlocked safety hood Touch screen controller 12" colour display Full optimisation Gsdpfxsw Tar Ee Aayoca 1000 mm out feed table

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 900 kg Gcodpfev A Hr Tex Aayja Total power requirement 5 kw

Condition: used, Cutting height at 90°: 135 mm Cutting length: mm Mitre range horizontal: - Mitre range vertical: -60° to +60° Gcodpfx Aaexu Dhrjyoa Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Workpiece clamp: yes Spray device: yes Extraction port: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4500x1200x1200 mm Weight 1500 kg Gcodpfx Ajvz Hz Eeayea Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x1070x1200 mm Weight 1150 kg Gcodpfxevz Hzxe Aayoa Total power requirement 10 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Gcodpfovz Eq Sox Aaysa Total power requirement 0 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9400x1200x1600 mm Weight 1400 kg Gcsdpevz Ekrofx Aaysa Total power requirement 12,5 kw