Pull saw

Graule ZS135

Condition: excellent (used), Year of construction: 1990, Radial saw ZS135 Year of manufacture: 1990 On stand With pneumatic clamp Hydraulic feed brake Saw blade for aluminium Cedpst Sin Sofx Adxshd 2 kW / 380 Volt

Condition: used, Year of construction: 1999, Cutting height at 90°: 135 mm Cutting length: mm Saw blade swivel and tilt: yes Vertical miter range: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Chodpfx Ajxc Hklsdxjd Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: excellent (used), functionality: fully functional, Graule ZS 135 Motor: 400 V / 2.0 kW Speed: 3800 rpm Chjdoxf Hcmspfx Adxsd Cutting length: 430 mm (at 90°) Cutting height: 135 mm Mitre range, horizontal: 45°-90°-25° Saw blade diameter: 350 mm Extraction port: 100 mm Weight: 100 kg

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm Chodpfx Ajxabqzsdxsd - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: used, No. 04480 Cross-cut and mitre saw Graule ZS 135 N Used This machine type is used for cutting to length and for horizontal and vertical miter cuts, double mitre cuts are also possible Precise ball bushing guide of the tool slide on hardened and ground steel shafts Fast mitre adjustment up to 25° horizontally and up to 45° vertically Adjustable fixed stops at 90° and 45° Machine can be set to mitre in 2 planes Cedpew Htm Refx Adxehd Adjustable aluminum stop plates Sturdy cast iron construction Lower saw blade guard can be connected to extraction system 3 kW three-phase 400 volt brake motor (special equipment) Saw blade diameter 350 mm, Saw blade holder 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: Cutting height 92 mm Including saw blade for aluminum 350 mm diameter Including machine stand for type ZS 135 N Including roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop that can be folded back, roller diameter approx. 40 mm Transport dimensions machine approx. 1300x700x1700 mm LWH, roller conveyor approx. 3000x500x800 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. Spring return of sawcarriage. 350mm max. sawblade dia. 2KW brake motor. 30-40mm dia spindle dia. 45 - 90 - 25 degree horizontal movement (swivel) Adjustable upper protection 350mm dia TCT sawblade - 72 teeth. Cutting capacity: Chjdpfx Ajdy Hm Eedxsd 350mm x 135mm deep at 90 degrees. 250mm wide x 135mm deep at 45 degrees (swivel). Dust extraction outlet 100mm Working height of table 900mm 'N' model with vertical tilting. 90-45 degrees tilt to left. Max capacity 350mm wide x 92mm deep.

Condition: reconditioned (used), functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Codpfjwhn T Ujx Adxjhd

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Csdpfoww Nd Tex Adxshd Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Year of construction: 2004, condition: good (used), Crosscut and mitre saw, pull saw, crosscut saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double mitre, aluminum crosscut saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw -Manufacturer: Graule Type ZS135 -Engine power: 2 kW -Speed: 2700 rpm -Saw blade: Ø 350 mm, pivoting -Cutting area: 90° flat 430 x 135 mm -Cutting area: 45° flat 300 x 135 mm Cedpfjt Hafkjx Adxjhd -Transport dimensions: 1150/910/H1200 mm -Weight: 185 kg with pallet

Condition: new, NEW Description: - Crosscut and miter saw with maximum cutting height of 135 mm Codpevwf T Sofx Adxjhd - Machines can be mitered in 2 levels - Stable gray cast iron construction - Precise ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25° horizontally and up to 45° vertically - Readjustable fixed stops at 90° and 45° - Lower saw blade guard can be connected to the extraction system Scope of delivery: Crosscut and miter saw type ZS 135 N without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Miter range horizontal: 45°-90°-25° - Miter range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 350 mm - Extractor nozzle diameter: 100 mm - Weight: 100 kg