6
150 €
Starting bid VAT not applicable
10 days left
10 days left
Differential taxation (VAT cannot be shown!!!)
Your bid prices are ex location plus 15% brokerage and plus 19% VAT on the brokerage.
O0v72
Crosscut and miter saw, pull saw, miter saw, panel saw, miter saw, radial saw, radial arm saw
-on: stable base
-Motor power: 1.49 kW
-Speed: 3000 rpm
N0p8z
-Saw blade: Ø 250 mm
-Max. Cutting height: 80 mm
-Cutting length: 500 mm
-Saw blade is: tiltable up to 90°
-Dimensions: 840/700/H1390 mm
-Weight: 150 kg
OZCELIK ALUMINIUM CROSSCUT SAW
TYPE VEGA II M
- Saw blade 400 mm
- Double mitre
- 4 Pneumatic clamps
- Spray lubrication system
- Roller conveyor 300 cm with length stop
- Blow gun
- Protective cap
Oxbkt
- Technical documentation
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
Graule crosscut and mitre circular saw
Type ZS 170
mitre range horizontal: 45° - 90° - 25°
Saw blade diameter 420 mm
Yljim8k2
cutting range:
Cross cut 90°: 410 mm
mitre cut 45°: 290 mm
cutting height at 90°: 170 mm
function tested
A completely automatic upstroke crosscut saw for the cutting of straight and angled components. Particularly suitable for the cutting of garden and furniture components
Brpqpzghqv
Specification
Right to left feed
Touch screen controller
Remote programming of cutting list - connection via USB key
10hp motor
Rack & pinion drive system
600mm diameter blade
Cutting capacity - straight - 160mm high by 310mm wide or 80mm by 390mm
Cutting capacity - 45 deg - 160mm x 220mm, 80mm x 270mm
Cutting capac...
cleaned, function tested, test run
new parts:
V-belt, support table, return spring
used, good condition
manufactured by Graule
type ZS 135 N
built in 1984
motor 2 kW
tiltable right hand to 65°
tiltable left hand to 45°
tiltable to 45°
Ok8md
underframe
fence aus aluminium
exhaust connection D 100 mm
required space ca. 1000 mm x 1000 mm x 1400 mm
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
Mobile chop station with extremely robust base, ready assembled and ready for use.
Included special equipment:
- Machine tiltable on both sides from the front
- Circular saw blade HM 520x50 Z60 W neg.
- Undercarriage mobile, especially stable
Data of the machine:
- especially due to constant zero point
good when using measuring equipment
and stop systems (miter and tilt!)
- Powerful three-phase motor 5 kW with automatic
Star-delta starting
- stable guide arm with 4 ball bushings
for preci...
Cross-cut and miter saw, pull saw, chop saw
-Motor power: 1.03 KW
Qkrqrb0id
-Speed: 2800 rpm
-Saw blade: 180 mm
-Cutting length: 250 mm
Semi-automatic crosscut saw MEP for aluminium type Cobra 350 SX
Machine no.: 000146 25/G Year of construction 1995
Series No. 004754
Saw blade diameter 350 mm
Sawing range at 90° Round Ø 120
Sawing range square at 90° 105 x 105 mm
Sawing range rectangle at 90° 180 x 70 mm
Sawing range at 45° round Ø 110
Sawing range square at 45° 95 x 95 mm
Sawing range rectangle at 45° 135 x 60 mm
Saw blade speed 1700 and 3400 rpm
table size 580 x 250 mm
Working height 920 mm
Engine output 2.2 / 1.5 kW
Power su...
- year of production 2013
- Polish production
- DTR and CE
Bjjknpyoui
TECHNICAL PARAMETERS
cutting width 600 mm
cutting height 140 mm
blade diameter 500 mm
main engine 5.2 kW
pneumatic pressure
spigot diameter 120 mm
saw spindle diameter 30 mm
feeding table 260 x 53 cm
receiving table 218 x 53 cm
transport dimensions (length / width / height) 260 x 115 x 125 cm
weight 650 kg
feeding and receiving table - option additionally payable PLN 3,000 net
1 branded Hüllhorst double crosscut saw
max. cutting length: approx. 2.000 mm
Fbr0uuyfc
max. cutting height: approx. 100 mm
Sawing cross-cut saw MZ CS 1000
Cutting width 1000 mm
engine power. 9,2 kw
saw blade diameter 550 mm
saw hole diameter 40 mm
rotational speed of saw 2800 RPM
roller feeders driven
cutting distances pneumatically controlled from the desktop
option of fast cutting of narrow elements
option of cross cutting 1000 mm
automatic waste discharge
feeding table 400 cm long
Cynthstg
receiving table length 200 cm
CE marking
working width 900mm
cutting heigth 180mm
pneumatic pressure of material
pneumatic movement of blade
infeed and outfeed tables with rolls
Btnwmkrwru
variable regulation of cutting speed
two buttons push for start the cycle
safety switch
Cross-cut and miter saw, pull saw, chop saw
-Motor power: 1 kW
Bexx7vjb38
-Speed: 2800 rpm
-Saw blade: 290 mm
-Cutting length: 300 mm
-Max. Cutting height: 80 mm
-Dimensions: 600/1160/H500 mm
-Weight: 76 kg
Fully functional train circular saw with underframe from Graule in very good condition. Additionally with further saw blade
PICKUP ONLY - No delivery possible
Private sale
Fdjn2alhu
Industrial Duty upstroke crosscut saw, for cutting aluminium sections, With oilpneumatic upstroke movement and horizontal and vertical pneumatic clamps. The machine is fitted with a 400mm TCT saw blade, with manual angle setting + / - 20 °. The cutting area is completely enclosed. There are various optional extras available such as roller tables with length stop.
Oilpneumatic upstroke of saw blade
400mm TCT saw blade
Bczt7kldkj
2.5 hp saw motor
Spray mist blade lubrication system
2 x vertical ...
Siro crosscut saw.
Adjustable lowering speed
Pneumatic clamp
Brnuwpjqyb
Max cutting depth; 80 mm
Cutting depth continuously adjustable.
Saw both straight and in miter
With length stop.
With cooling pump
And a built-in collection tray.
Supplied with extra saw blade.
Motor; 1.8 kw max; 2.5 hp
Dim; l x w x h 95 x 90 x 195 cm
Sawing crosscut OGAM TR800
Cyevej0i
cutting width 800 mm
cutting height 110 mm
motor power 7,5 kw
saw blade diameter 450 mm
pneumatic material pressure
roller tables on both sides
total length of the machine 580 cm
working width 900mm
working height 180mm
pneumatic pressure of material
pneumatic blade movement
Oocs3zsp
infeed and outfeed table with rolls
variable regulated cutting speed
two buttons of starting cycle
Working width max. 3000 mm
Ytkiv0
Directly available
If you needs more information please contact me
Brj9gavefx
A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity.
Ju0nky
Precision ball bearing movement on hardened steel runners.
Sturdy cast iron construction with steel base stand.
Spring return of sawcarriage.
350mm m...
(tiltable), 400 Volt three-phase brake motor 2 kW
Saw blade diameter 300 mm, saw blade holder 30/40 mm, cutting height 85 mm,
cutting length 380 mm,
mitre cuts, saw blade set vertically, tilted 45° to the left or right: 265x85 mm
mitre cuts vertical, saw blade tilted 45° to the left: 380x60 mm
Technical data:
Three-phase motor 400 V: 2 kW, 2800 rpm.
Saw blade diameter: 300 mm
saw blade bore: 30/40 mm
Machine weight: approx. 75 kg
Suction nozzle diameter: 75 mm
Working range:
Cut to length: 380 x...
For sale is a Rapid under table crosscut saw with two hand operation.
Machine number 1364.
The machine is little run and in good condition.
The saw blade diameter is 500 mm.
Vt3mii
The saw angle can be infinitely adjusted.
saw height 150 mm.
chian infeed 6.000 mm
Ofpf2
outfeed sytem
Working width 1500 mm
Bst3gv9ofo
COMEC machine for shortening and drilling with feeder
FORATRICE - TRONCATRICE
FMIOV-2200-ZUT-8UFCA2V30
23eq0n
Year of manufacture -2004
A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position....
(tiltable), 400 Volt three-phase brake motor 2 kW
Saw blade diameter 300 mm, saw blade holder 30/40 mm, cutting height 85 mm,
cutting length 380 mm, material support shoulder made of steel/ALU
Mitre cuts, saw blade set vertically, tilted 45° to the left or right: 265x85 mm
Ythlz8
Mitre cuts vertical, saw blade tilted 45° to the left: 380x60 mm
Technical data:
Three-phase motor 400 V: 2 kW, 2800 rpm.
Saw blade diameter: 300 mm
saw blade bore: 30/40 mm
Machine weight: approx. 75 kg
Suction nozzle ...
Crosscut saw for strips Düspohl, type: DTS-350 E
Machine for cutting or cutting profiles made of plastic or wooden materials or similar in the run.
Machine No: 00900192
Cutting area 10 – 320mm
Bcy8ruqw
Cutting height max. 130mm
Crosscut saw motor 4 kW
Saw blade speed 4200 U/min
Feed rate 80 m/min
Saw carriage drive 5,90 kW
Saw stroke drive 1,1 kW
Drive band chop saw 0,64 kW
Number of cuts 50 / min
Accuracy +-2 mm
Operating voltage 400 V, 50 Hz
Total connected load about 14 kW
Dimensions 2010 x...
Machine line version
input length: 400 - 6000 mm
wood width: 86 - 150 mm
wood thickness: 63 - 72 mm
From place
Freely loaded
Owuip
Technical data enclosed
Maximum cutting height : 120 mm
Blade stroke : 500 mm
N2dgd
Speed of rotation of the blade: 2850
Engine power: 4KW
Weight: 180 kg
Crosscut and mitre saw (inclinable) 400 Volt three-phase current
brake motor 3 kW, saw blade diameter 420 mm, saw blade holder 40 mm, cutting height 170 mm
Saw blade inclined at 45°: cutting height 115 mm, cutting length
410 mm
with machine stand
Imou8djz
Machine can be inclined on both sides from the front via hand crank
Used crosscut and miter saw makes Graule type KS Ma.Nummer 1995-2-4
Bszqzquo
Built in 1995
Speed 2.760 RPM.
Power 2,2 kW length 90° 115 mm for miter 45° 80 mm cutting height approx. 50 mm weight approx. 50 kg location: 54634 Bitburg's stock
working width 260mm
working height 110mm
infeed table length 2,7m
Bq9mokgqfd
outfeed table length 2,7m
main motor power 2,7kW
blade diameter 400mm
year of manufacture 2007
Automatic crosscut saw for circular and gang saws make VOLLMER type AT 500
Year of manufacture 1961
Biyisbu8qv
Technical data:
Gangsaws any dimension
Circular saw outer diameter 120 - 800 mm
tooth pitch 12 - 80 mm
Tooth height from 5 mm upwards
blade thickness 0.8 - 3.5 mm
Cabinet per side 0.3 - 1.5 mm
Operating speeds 16 teeth/min
Connected load 0.55 kW
Dimensions L x W x H 1000 x 600 x 1200 mm
Weight approx. 800 kg
little used, in very good condition
Crosscut saw AS-600 Vorfürmaschine
Ifmlrk7ie
Incl. blade diameter 600 mm.
Incl. Automatic minimum quantity lubrication.
Incl. smooth lift and manual length stop.
Machine can be visited, by appointment, on the spot.
Continuous crosscut saw
Be3rtldeet
Make Oswald
Type BKS
Total connection 25kw
700 mm blade diameter
Jvh7o3
Overcut 150 Crosscut Saw , Auto Optimization System , 10 mm x 260 mm / 100 mm x 150 mm .
Fe9helz
Crosscut saw Reinhardt HRK 800
Brikx2iejy
- after the technical review
- German production
TECHNICAL PARAMETERS:
cutting width 1000 mm
cutting height 145 mm
main engine power 15 kW
blade diameter 600 mm
hydraulic material pressure
4 kW hydraulic pump power
blade guard
rolls in the table top 4 pieces
material feed
regulation of the feed speed on the inverter
pneumatic feed pressure
feed motor power 0. 75 kW
table top dimensions 1120 x 1000 mm
top height 930 mm
stub diameter 3 x 120 mm
dimensi...
Crosscut saw + Kantenrunder WEINIG suitable for UNITEC 10 or similar, year 1998, CNC controlled motor-driven, number: 2.
Price per piece: €2.000,00 + VAT
Nhtv8qgn
Crosscut saw AS-1000
New machine
Saw blade diameter 1000mm.
Pneumatic minimum quantity lubrication (optional).
Hydraulic material clamps (with pressure control).
Fn29w79
Hydraulic saw feed (with pressure and flow control).
Infinitely variable speed control via frequency converter.
2 Blades ø 400 - tiltable - 3000 rpm
cuttings min/max 210/2500 mm
11 KW TOTAL
Bksbk8iqye
1 new Holtec PICCOLO handy, precise and flexible to use,
- mobile package crosscut saw in light design e.g. for starting and
End cuts on sawn timber packages
- Chain set with STIHL chain type Rapid Super 0.404" for
extremely fine surfaces and stellited on both sides
Guide rails (quadruple turnable)
Bfmncgfo
- Electric motor 7,5 kW
- large cutting capacity
- for packages up to 1.15 m x 1.15 m and
- Round timber diameter up to 1,30 m
- Sword length: 1,60 m
400V, 50 Hz
sell 1 JRIMAC under table crosscut saw UKS 750
Cross sections: 50x800 - 170x250mm
Saw blade: 550mm
working height: 850mm
Suction connection bottom and top: 160mm
- infinitely adjustable, pneumatic cutting feed
Bjcmawkcka
- hydraulic. Brake cylinder f. uniform lifting speed
- pneumatically controlled workpiece clamping device
- cut release via 2-hand control, with protective shield
- Roller conveyors and stop systems on request
Crosscut saw with optimization.
The Opti-Kap automatically recognizes the lengths, and cuts the workpieces into components with an accuracy of ± 1 mm.
This machine come with electrical movement of top beam.
Short outfeed belt, but option to ad longer belt with sweepers
Byvkyipe
or stackers.
