Manual feeding station, Magazin for second cut (strips), Rotary board cutting unit, Number of cutting knives: 7 sets, Table delivery
Uwkbyegl
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and board
shi...
used cross-cut line for boards, price on request, more detailed information on request
Bjn9wqhrnf
Manual feeding station, Magazin for second cut (strips), Rotary board cutting unit, Number of cutting knives: 8, Table delivery
Gwcgyk
Serial No. 1360
Equipment number 10070608 / 30030386
Control ByVision
Capacity 3 kW
Thickness of cut Steel 20mm, Stainless steel 12mm, Alumimum 12mm, Brass 6mm, Copper 6mm
Maximum material size 3000mm x 1500mm
Maximum material weight 890kg
Max, positioning speed parallet axis X,Y 100m/min
Max, simultaneous positioning speed 140m/min
Cutting area X, 3048mm./ Y, 1524mm./ Z, 70mm
Input 400/3/50hz
Zi83qpk
Fitted with Dust collector
Equipment Sheet storage rack,
Features Abus crane and vaccum sh...
Technical data paper roll cutting machine
Manufacturer unknown
Type unknown
Bzhf9mfq
Year of manufacture unknown
Dimensions feed table for rolls:
Width inside of rolls 2.195 mm
Height inside of castors 465 mm
Transport dimensions Feed table over all:
2,650 x 1,300 x 2,150 mm (W x H x D)
Dimensions roller cutter:
Width cutting shaft inside 2.250 mm
Transport dimensions of the roll slitter over all:
3,050 x 1,550 x 550 mm (W x H x D)
Remarks:
There are no further data or documents availa...
Waterjet cutting machine, double head,
Working table: 3.000x3.600x200mm. Numerical control: Siemens
Ingersoll-Rand pressure pump
Cutting options with or without abrasive
Possibility of manual inclined cutting
Total exterior dimensions approx. 9.,600 x 7.500mm
By8iyzls
Heavy duty roll core cutting machine in very good condition. Can cut down paper roll core to the desired diameter.
Cuzklivq
Can ship worldwide.
Table: 1500x3000 mm
Max. cut size: 1500x3000 mm
Ope0j
Thickness of cut materials:
Steel materials: max. 25mm (30mm)
Stainless materials: max. 25 mm
Aluminum and aluminum alloys: max. 25 mm
Technical condition: good, fully functional, new transformer, new hoses, possibility to test
Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma:
Year 2007
Working area: 24m x 3150mm
Working condition
Svd7j2tt
Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification
Year 2014
Working area 30m x 3150mm
Good Condition
2x Donaldson Aspiration Unit
50m rails + cutting table
Technical specifications:
Bno23ofohu
Working area: 1300 x 900 mm
Workpiece thickness: 25 mm
Max. Speed: 800 mm/s
Cutting Depth: 0 - 50 mm
Voltage: 220 Vtl
Dimensions:
Length: 1850 mm
Width: 1320 mm
Height: 1100 mm
Weight: 450 Kg
More info:
CNC laser cutting / engraving machine, very well maintained machine and recently underwent major maintenance, the entire head was also replaced again.
The machine is equipped with a new 100w RECI lamp, the machine is like new.
The software is included and i...
Waterjet cutting machine with 5-axis head.
Total cut-off hours: 2.147 hours. Hours of operation: 7.484 hours. Dimensions axles: X-3.000mm Y-4.000mm Z-500mm.
Dnlbiyd80
Pump "KMT", press max.: 4.100bar.
Maximum part thickness: 200 mm.
Maximum permitted load of pieces: 790 kg / m2.
Number of cutting heads: 1 of 5 axes.
Maximum cutting speed: 20 m / min.
Machine tolerance according to VDL / DGQ 3441: ± 0.05 mm / m.
Repeat accuracy: ± 0.025mm / m.
Kama TS 105 used diecutter, 74x105 from 2006.
Mufxk0
CLEANED AND INSTALLED, automatic die cutter for paper, cardboard, plastics, micro corrugated board up to 1.500 gsm/1,8 mm
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with previous
...
Plasma cutting machine HPM 2000 x 4000
satellite cutting head
6 stations
generator hyperterm Hpr 130
Complete fume exaust system and software
Bjue8uphtb
COMPLETELY REVISED
ALCOR I
THREE-AXIS CUTTING CENTRE CONTROLLED BY CNC
APPLICATION: For cutting aluminium, PVC and wood profiles, blade Ø 550 mm.
MAIN FEATURES:
- Precise cutting at any angle between 30° and 150°
- Up to 7 profiles can be loaded
- Waste treatment capacity of more than 800 mm for new production
- No waste cutting
- CNC control, touch screen
- Data transfer via remote network connection, Internet and USB
- Remote access
- Pneumatic maintenance system
- High processing capacity to increase efficiency...
ALCOR II C
8-axis CNC-controlled cutting and machining centre
7 spindles
APPLICATION:
For cutting, milling, punching and marking on 4 profile surfaces
MAIN FEATURES:
- Precise cutting at any angle from 30° to 150°
- Up to 10 profiles can be loaded
- No waste cutting
- CNC control, touch screen
Nvkij
- Data transfer via remote network connection, Internet and USB
- Remote access
- Pneumatic maintenance system
- High processing capacity to increase efficiency
- Processing on 4 profile surfaces pos...
ALCOR II R
PVC cutting centre
Used for cutting, milling, punching and marking on 4 surfaces of PVC profiles.
Servo-controlled cutting
Servo controlled pivot axis
Automatic positioning in all degrees between 30° and 150° with servo drive
Robot with pneumatic handle and servo axis control and manual adjustment function for accurate profile positioning
Industrial PC with Windows-based touch screen and easy to use practical interface
Remote access Data transfer with remote control Network connection...
Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine easy .
Manufacture : Dairy Machinery UK
Model : DMUK EXSH1
Usage : Butter and Various Viscous Pastes Extruding, Shaping and Cutting Machine
Shapes and Sizes : Choose your own shpe and size
Bfsvspj9uf
Control Panel : Butter Working Switch, Butter Extruding S...
Made in Czechoslovakia TOS Celakovice
Machine for the production of spur gears with straight and helical gears, sprockets and worm gears
dimensions: L x W x H: 3915 x 2650 x 2410 mm
weight 13500 kg
Ysrkuk
Total power consumption of the machine 22 kW
Largest head diameter of milled wheel 710 mm
The largest gear module of the milled wheel 10 mm
The longest travel of the milling support 450 mm
The largest distance of the tip of the support arm from the table area is 770 mm
The largest angle of incl...
Table dimensions: 2x 2450x1150mm, including 2x Industrial Robots ABB IRB 1600 and High Pressure Pump BHDT HYTRON 40.37.
Y3c0nl
LINE FOR CUTTING AND STRAIGHTENING RE-BAR/REBAR.
Automatic line is designed for straightening and cutting of smooth re-bar diameter from Ø6mm to Ø16mm and ribbed re-bar from Ø5mm to Ø12mm, depending on machine type.
Except straightening, machine cleans re-bar from dirt and rust.
Complete line set consists of wheel for re-bar pulley, machine for straightening and reception desk for straightened re-bar.
Machine operates by principle of „flying bushes“ (rings).
Instructions for use line for cutt...
KENDALL & GENT 1" Thread Cutting Machine
Hand Feed fitted with 1" Diehead c/w Chaser Holders
Bdvgwjk7i
4 speed gearbox 55 - 170 RPM
Ball chuck vice for fast action c/w many collets & spares
Coolant
Checked over, new coolant system & pump,
weight of the machine ca. 0,25 t
Eqcd0gd
tapping bell
2 bells
Flame cutting machine, torch, oxyacetylene cutting machine
-Shaft diameter 30 mm
-Shaft length 220 mm (260 mm with sleeve)
-Overall length 405 mm
-for 16 mm nozzle diameter
Nxzat
-Weight 1.3 kg
thread dia. M6 - M36 M
Bhcnubq8po
turning speeds 150 U/min
working area 1200 Rmax.
engine output 1,2 kW
voltage 230 V
weight ca. 50 kg
Travel axes: 550 x 370 x 310 mm [ X x Y x Z ]
max. workpiece size X: 820 mm
max. workpiece size Y: 730 mm
max. workpiece size Z: 300 mm
max. workpiece weight: 1000 kg
with AWF ( Automatic Wire Feeding )
U / V axis: +/- 60 mm x +/- 60 mm
Y008pmyb
submerged
cooling unit
max. taper cut: +/- 30° with 80 mm
TRUMPF L4050 6KW LASER CENTER
•4000mm x 2000mm
•TLF 6000 turbo
•Mild steel 25 mm
•Stainless steel 25 mm
•Aluminium 15 mm
•Resonator rebuilt
•Siemens SINUMERIK 840D control
•RotaLas tube cutting attachment
•Automatic shuttle tables
•5" & 7-1/2" & 10" cutting heads
•Chillier
•Dust extraction
Weqi2t8l
•Light guards
•LiftMaster
•Machine manuals and programming manuals
•Full history from new
•New 2005
The resonator has been completely rebuilt
MAGEBA GA 52/2, 2” Thread Cutting Machine
threading length 500 mm
Hollow spindle diameter 54 mm
Ortzt77l
spindle RPM 25-140 rpm /
voltage 380 V
frequency 50 Hz
weight of the machine ca. 0,75 t
dimensions of the machine 1,0 x 1,8 x 1,4 m
Large selection of tooling
Movement space: X / Y / Z: 400 x 250 x 100 mm
ND-Yag laser: 100W
Ray-Cutter Free Optic C axis direction of rotation: 360 °
Focal length: 70 mm
Machining laser Weilelänge: 1064 nm
Nominal power: 73 W / cw
Max. Pulse energy: 4 mJ
Max. Pulse repetition rate: 50 kHz
Min. Pulse width: 30 ns
Laser protection class: 1
Connected load: 400 V / 60 Hz
Dimensions L x W x H: 1600 x 1600 x 2200 mm
weight: approx 1700 kg
colour: Gray
Biizt3hu
Laser precision processing system for processing hard materials such...
Scoring head, glass cutting table, glass cutting table, glass cutting machine
-Number: 23x scoring heads available
-Manufacturer: Eitzenberger Luftlagertechnik GmbH
-Article no.: 093329
-Price: per piece
-packed: individually
-Dimensions: 310/160/H60 mm
-Weight: 0.5 kg/piece
Rt3ipjgcq
table length 3000 mm
table width 1500 mm
laser capacity in Watt 4.000 Watt
x-axis 3050 mm
z-axis 150 mm
y-axis 1550 mm
Beoahd90db
burner heads Precitec HPSSL
total power requirement 22,0 kW
weight of the machine ca. 14.200 kg
range L-W-H 10.360 x 5.110 x 2.310 mm
Travel axes: 750 x 500 x 300 mm [ X x Y x Z ]
max. workpiece size X: 1050 mm
max. workpiece size Y: 750 mm
Bniyvspiet
max. workpiece size Z: 300 mm
max. workpiece weight: 1500 kg
with AWF ( Automatic Wire Feeding )
U / V axis: 770 x 520 mm
submerged
•3050mm x 1525mm
•Z axis 250mm
•Max sheet weight 725 kg
•Max positioning speed 120m/min
•Fanuc 4kw
•Mild steel 20mm
Pvbgoq
•Stainless steel 15mm
•Aluminium 6mm
•5" & 7-1/2" quick-change self-centering lens cartridges
•Fanuc 16i-LB CNC control
•Chillier
•Dust extraction
•Full working condition
•L: 11750 W: 4895 H: 2220
CNC flame cutting machine BACH type ACW 2500
Flame cutting machine with CNC control NBS 400
machine No. 14 561-06 Year of construction 2006
cutting range 2500 x 6500 mm
Raceway length 8000 mm
track gauge 3345 mm
Height of the raceway 650 mm
2x machine cutting torches
with firing table
Omhud
Working hours machine: 51614 h (new TurboBlower 02.02.18: 50.635 h) h
Laser power: 4000 Watt
Working range laser: 2520 (5040) x 1550 x 300 mm
Max. steel: 12 mm
Max. stainless steel: 10 mm
Max. aluminium: 8 mm
Length: 5745 mm
Width: 2630 mm
Height: 2789 mm
Machine weight: 7700 kg
Bczxurbnwz
Electrical connected load: 65 kVA
Standard configuration
- max. load of table: 330 kg- speed of axis: X/Y 80 m/min- simultanous: 113 m/min- speed of Z-axis: 60 m/min- Positionsabweichung: +/- 0,01 mm auf 500...
table length 3.000 mm
table width 1.500 mm
laser strength 3 kW
Laser type IPG
Control BodorPro 2.0
positioning accuracy 0,05 mm
repeating accuracy 0,03 mm
rapid traverse 140 m/min
max. acceleration 1,5 G
max. table load 900 kg
Ccs2oip
total power requirement - kW
weight of the machine ca. 11,0 t
dimensions of the machine ca. 12,0 x 3,7 x 2,3 m
Documents
Laser-Cutting-Machine
BODOR - P3015
- NEWMACHINE
table length 3000 mm
table width 1500 mm
2t3a9x0z
material thickness Stahl 0,8 - 25 mm
material thickness Aluminium 0,8 - 12 mm
Operating hours: approx. 53680 hours Laser switch-on hours: approx. 34900 hours included: - Changing table system with portal feeder: Vacuum portal loader for moveable raw material storage and moveable storage table for finished goods - Cooling unit EF Cooling WKL Due to planned new acquisition of a larger laser, the last maintenance was not carried out. A major main...
In good technical condition, fully functional.
Year of production 2001.
Shot length: 8000 mm.
Table width: 2500 mm.
Cisrwf2
X-axis travel 4250 mm.
Power 4kW.
Thread cutting machine with Stehler jaws, thread cutting head
Qlbxmq7cq
-Chuck diameter: 190 mm
-Size: 1/2 - 2 inches
-Weight: 130 kg
Format (cm): 76
Equipment / Additional information:
Operating voltage: 380 V
Wabhhhpl
Control voltage: 220 V
thread dia. 1/4 - 2" mm
diameter Bolzen M8 - M52
turning speeds 40 U/min
Dw9gga
engine output 220 Volt
total power requirement 600 Watt
table length 3.000 mm
Bz9a2j3q
table width 1.500 mm
laser strength 4 kW
Laser type IPG
Control BodorPro 2.0
positioning accuracy 0,05 mm
repeating accuracy 0,03 mm
rapid traverse 140 m/min
max. acceleration 1,5 G
max. table load 900 kg
total power requirement - kW
weight of the machine ca. 11,0 t
dimensions of the machine ca. 12,0 x 3,7 x 2,3 m
Documents
Laser-Cutting-Machine
BODOR - P3015
- NEWMACHINE
spindle diameter 75 mm
x-travel - mm
y-travel ca. 500 mm
z-travel ca. 300 mm
Column-Diameter 160 mm
Boring power 50 mm
spindle taper MK4
spindle turning speed range 50 - 1500 U/min
feeds 0,12 / 0,2 / 0,32 mm/U
drilling depth 200 mm
throat 280 / 540 mm
thread capacity M 45
total power requirement 5 kW
Bjbd83y39t
weight of the machine ca. 2 t
dimensions of the machine ca. 2,3 x 2,4 x 2,4 m
Control
Drilling and tapping machine on base with splash guard cabin, screen control for x + y travel ...
max. wheel diameter 1000 mm
gear width 116,84 mm
max. module 17
min. module
Control FANUC series 150 M
number of teeth 5 - 200
range of tooth size 31,75 mm
tooth width 116,84 mm
x-axis -305 / +305 mm
y-axis -305 / +305 mm
z-axis -25 / +711 mm
b-axis -5 / 90 °
milling head Ø 500 / 350 mm
control
total power requirement kW
weight of the machine ca. 24 t
dimensions of the machine ca. 5,5 x 5,3 x 3,2 m
Beomhsmttl
max. workpiece dia. with single indexing method 1000 mm
max. workpiece dia. ...