Angular panel saw GABBIANI AXIOMA 12

SCM GABBIANI AXIOMA

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Credpfx Asukhd Aogfjc Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Crjdspbvqvopfx Agfsc Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) Cjdpfxouc Idxo Agferc 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 7,908 h, fuel type: diesel, motor manufacturer: MERCEDES, gearing type: converter, battery voltage: 28 V, tire condition: 70 %, color: yellow, Equipment: CE marking, air conditioning, all wheel drive, centralized greasing system, full service history, seat heater, 4x4 tractor Only 8,000 operating hours Registered as a working machine and homologated for snow plow and salt spreader attachments on public areas Available: salt spreader trailer + 2 m³ salt spreader + ballast + homologated snow plow blade for road use – €5,000 + VAT Swivel seat with three positions Air conditioning External 24V electrical sockets front and rear for accessories Crjdpsv H Urcofx Agfsc

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 8,500 h, load capacity: 2,500 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, battery capacity: 575 Ah, battery voltage: 48 V, fork length: 1,200 mm, total height: 2,145 mm, Equipment: head guard, lighting, pallet forks, sideshift, Four-wheel electric forklift with triplex mast, 2.5-ton lifting capacity. Cjdpfx Aewt Awxogferc

Condition: used, functionality: fully functional, operating hours: 3,443 h, CLARK FORKLIFT LOAD CAPACITY: 50 Q. DIESEL NEW FORKS LENGTH: 1.80 MT. ORIGINAL FORKS LENGTH: 1.20 MT. (ALWAYS SUPPLIED) NEW SEAT WITH ELBOW REST MAX. LIFTING HEIGHT: 4.80 MT. WORKING HOURS: 3,443 SERVICE CARRIED OUT IN MAY 2025 READY FOR DELIVERY Credpswtffxjfx Agfjc

Condition: good (used), Year of construction: 1990, For sale: forklift Clark C500 Y 130 PD The forklift has been in continuous use at our company – although only occasionally for handling heavier loads. We have been using it in our company for 7 years. It is in good condition. We are selling it because we want to purchase a model with a higher lifting capacity (10 tons). Crsdou D D H Ijpfx Agfjc Technical Specifications: Model: Clark C500 Y 130 PD Year: 1990 Maximum lifting height: 535 cm Minimum total height: 370 cm Fork length: 155 cm Capacity: 6 tons (6000 kg) Total weight: approximately 8500 kg Transmission: hydrostatic (with multiple speeds to choose from) The price is €7950, but we will consider a better offer. Tags: forklift, Clark, Jungheinrich, Linde, OM, CAT, Cesab, Detas, Manitou, Still, Hyster.

Condition: used, functionality: fully functional, power: 147 kW (199.86 HP), fuel type: diesel, overall weight: 18,200 kg, Year of construction: 2000, operating hours: 12,370 h, JCB 456B Wheel Loader Year of manufacture: 2000 12,370 operating hours Total weight: 18,200 kg 147 kW 1x bucket GOOD CONDITION Export net price: €18,500.00 Crsdpfxjwk Evfs Agfjc All information provided without guarantee / subject to errors and omissions.

Condition: new, functionality: fully functional, empty load weight: 8,221 kg, axle configuration: 3 axles, loading space height: 2,650 mm, tire size: 385/65, Year of construction: 2025, Equipment: cooling unit, NEW IMMEDIATE DELIVERY Kassbohrer SRI.C - Refrigerated semi-trailer Internal height: 2,650 mm Fiberglass reinforced panels Thermo King SLX i300 refrigeration unit Printer Aluminum floor Two drain holes Crodpfx Ajw D Eg Djgfjc Load securing rail Pallet stop Spare wheel holder NEW MODEL

Condition: good (used), CMP PRESS consisting of: 1. Hydraulic platform for loading coating 2. Automatic vacuum loader Mod. Inde 2700 3. Glue spreader with 4 rollers, length 2800 4. Hydraulic platform for internal longitudinal loading 5. Roller unloader for coating machine 6. Composition belt in vipla for sheet lamination 7. Composition belt 8. Belt with band for the composition of multilayers 9. Composition belt for the formation of panels 10. Accumulation belt 11. Loading belt with pusher for inserting panels into the loader 12. Press magazine with 12 compartments - Tablet loading Cjdpfjvnth Ssx Agfjrc - Stops - Hydraulic lifting 13. CMP press with 12 compartments - Width 1950 - Length 2700 - Pressure cylinders from above - 9 pressure cylinders - Opening cylinders 14. CMP unloader with 12 compartments - Luggage rack - Conveyor belt 15. Hydraulic platform for unloading panels 16. Hydraulic unit 17. Control panels and electrical control