Used Reel for sale (821)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Hjdpfxoy R Npco Aagjfg Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, actuation type: manual, coil weight: 3,000 kg, coil width: 500 mm, mandrel diameter: 508 mm, turntable diameter: 1,480 mm, Load capacity: 2x 3000 kg Floor to center of mandrel: 1020 mm Outside diameter of stop: 1480 mm Mandrel length: 560 mm Mandrel nominal diameter: 508 mm Coil limiter rings: on both sides Braking: handwheel, band brake Mandrel expansion: threaded spindle with socket wrench Rotating bearing locking: foot pedal Operated flawlessly in production at the customer's facility until dismantling. We can assist you with integration through: Hodpfx Aaoy Smfqjgefg Planning Mechanical overhaul Control engineering Painting Safety concept CE documentation

Condition: used, functionality: fully functional, coil weight: 3,000 kg, mandrel diameter: 508 mm, mandrel length: 620 mm, turntable diameter: 1,400 mm, Load capacity: 2x 3000 kg Floor to pin center: 950 mm Outer stop diameter: 1400 mm Hjdpfx Asy Smcisagjfg Pin length: 620 mm Nominal pin diameter: 508 mm Coil restraining rings: both sides Braking: pneumatic, disc/calliper Unwinding drive: Electric, gear motor Pin expansion: Threaded spindle with socket wrench Rotary bearing locking: Foot pedal Operated flawlessly in production until dismantling at the customer's facility. We can support you with integration by providing: Planning Mechanical overhaul Control system engineering Painting Safety concept CE documentation

Condition: used, functionality: fully functional, coil weight: 2,000 kg, mandrel diameter: 508 mm, mandrel length: 420 mm, turntable diameter: 1,350 mm, Load capacity: 2x 2000 kg Floor to centre of mandrel: 950 mm External stop diameter: 1350 mm Mandrel length: 420 mm Nominal mandrel diameter: 508 mm Coil limiting rings: both sides Braking: pneumatic, disc/brake caliper Uncoiling drive: Electric, geared motor Mandrel expansion: Threaded spindle with socket wrench Hfodpfx Asy Sl Rxsageg Rotation bearing locking: Foot pedal Operated flawlessly in production at the customer's facility until disassembly. We can support you with integration by providing: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, functionality: fully functional, degree of automation: manual, actuation type: manual, coil weight: 500 kg, mandrel diameter: 508 mm, mandrel length: 300 mm, turntable diameter: 1,200 mm, Load capacity: 2x 500 kg Floor to spindle center: 850 mm Outer stop diameter: 1200 mm Spindle length: 300 mm Spindle expansion range: 300-610 mm Coil limit rings: on both sides Braking: handwheel, band brake Spindle expansion: via handwheel, bevel gear set Hfodsy Slu Djpfx Aagsg Rotary bearing lock: foot pedal Was operating flawlessly in customer production until disassembly. We can support you with integration through: - Planning - Mechanical refurbishment - Control system construction - Painting - Safety concepts - CE documentation

Condition: used, functionality: fully functional, actuation type: manual, coil weight: 500 kg, coil width: 320 mm, mandrel diameter: 508 mm, turntable diameter: 1,300 mm, Load capacity: 2x 500 kg Floor to spindle center: 1080 mm Outer diameter of stop: 1300 mm Maximum strip width: 320 mm Nominal spindle diameter: 508 mm Coil limiting rings: on both sides Braking: handwheel, band brake Spindle expansion: threaded spindle with socket wrench Locking of the turntable bearing: foot pedal Operated flawlessly in production until disassembly at the customer's facility. We can assist you with integration through: Planning Mechanical overhaul Control system engineering Hsdpfx Aey Slrcoagjfg Painting Safety concept CE documentation

Condition: used, functionality: fully functional, Year of construction: 2002, coil weight: 1,500 kg, coil width: 425 mm, mandrel diameter: 508 mm, turntable diameter: 1,500 mm, Load capacity: 2x 1500 kg Floor to center of mandrel: 1090 mm Outer diameter of stop: 1500 mm Mandrel length: 425 mm Mandrel nominal diameter: 508 mm Coil limiting rings: both sides Braking: pneumatic, brake disc/caliper Mandrel expansion: threaded spindle with socket wrench Locking of rotary bearing: foot pedal Operated flawlessly in customer’s production until dismantling. Control system not included. Hjdpfsy Slp Ujx Aagjfg We can support you with integration through: Planning Mechanical overhauling Control system assembly Painting Safety concept CE documentation

Condition: used, mileage: 10 km, first registration: 03/2025, axle configuration: 2 axles, color: red, Year of construction: 2025, Manufacturer Bucher Model Remote Reel / Mobile Raupenhaspel Year 2025 Condition Very good Serial Number 24110200 Ref. nr. 7867 Reg. date: 30-03-2025 Net weight: 850 Kg Manufacturer: Municipal Books Snake: 200m 1" Drum: Tiltable Hose guide: Manual Chassis: Hinowa TS701 Track width: 756 - 1,056mm Engine Honda GX390 Hfodpfx Aewv Uw Nsagog Fuel: Petrol

Condition: ready for operation (used), Year of manufacture: 1988 / Overhauled in 2019 by HYDAC Accessoirs with a completely new control system Load capacity: 2,000 kg Table diameter: 1,500 mm Band width: max. 100 mm Band thickness: 0.3 – 1.0 mm Maximum coil height (incl. pallet): approx. 850 mm Number of pinch rollers: one pair Weight: approx. 2,200 kg Dimensions: approx. 2,600 x 2,100 x 1,700 mm Execution/features: • Sturdy welded frame construction • Coil hold-down plate • Large band deflection roller • Deflection roller and pinch rollers hydraulically height adjustable • Motor-driven pinch rollers with lateral band guide and roller cage • Deadman switch for safe band threading during setup operation at safe speed • Direction of operation (forward/reverse) selectable via hand switch • Continuously adjustable pulling force via potentiometer • Loop control system • Free-standing control cabinets with operator panels Hfjdpfoy Hlgpox Aagsg

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Hfedpfx Aoya H S Seagog Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: used, Year of construction: 2015, The decoiler including coil tilting device is for sale and can be inspected at short notice. HS Automation Strip processing line with 4 ton decoiler incl. coil tilting device Type MS41OL, year 2015 Technical data - decoiler: Max. coil weight: 4000 kg Standard strip width: 500 mm Expansion range: 450 - 550 mm Max. outside coil diameter: 1900 mm Expansion drive: hydraulic, three-phase motor 400V 50 Hz Uncoiling speed: 30 m/min Loop control: extraction via preset pressure or loop control system Hfodpfx Aaow D Sn Ujgog Coil retaining arms: 6 pieces with quick-lock system Safety device: prevents band flapping Decoiler construction and function The decoiler is made of a solid structure using electro-welded and machined components. The expanding mandrel can unwind to the left and right. Expansion is actuated hydraulically from the operator panel. The decoiler is equipped with a three-phase motor enabling the decoiler drum to be wound and unwound in setup mode. In automatic mode, strip extraction can be performed either via preset pressure or via continuous loop control regulation. Control description The decoiler is powered by a frequency-controlled three-phase motor. The loop control between the decoiler and downstream equipment is contactless, regulated by an ultrasonic sensor. Analog control ensures smooth, continuous operation of the decoiler. All system functions can be operated in both setup and automatic mode.

Year of construction: 2019, condition: good (used), for 4 wheels; mobile, with locking castors Hfsdpfey Nm Iyex Aagog

Condition: excellent (used), Year of construction: 2026, Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm Hfodpfxjxvh Huj Aagjg -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Condition: good (used), Year of construction: 1999, Lg 33922 Unwind-straightener combination SOPREM BRH 7-200-80U-1250 BAP strip width max. 200 mm Hfjdpfshuwacox Aagjg Coil weight max. 1,250 kg Spreading range approx. 380 to 430 mm Coil outer diameter max. 1,300 mm Strip thickness approx. 0.8 to 3 mm Working direction from right to left

Condition: new, Roller splitter RGS20 Motor power 7.5kW Cutting force 20 tons Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm Machine weight approx. 2500kg Tank capacity approx. 100 liters Hfjdpjq A Turjfx Aagog -Body color RAL according to customer requirements Protective grille/blade bar RAL 1028 melon yellow Ordered goods Price and further information on request

Condition: new, - Engine power 7,5kW Hfodpfx Aaoftnt Negog - cutting force 20to Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm - machine weight approx. 2500kg - tank capacity approx.100Liter - hand guard in the area of the control panel and opposite to it -colouring of body RAL according to customer's request protective grid/knife bar RAL 1028 melon yellow Ordered goods Price and further information on request

Condition: new, - Motor power 7.5 kW Hsdsd Tfzdepfx Aagofg - Cutting force 25 tons Cutting channel designed for: - Max. roll length 1500 mm - Max. roll diameter 800 mm - Machine weight approx. 3000 kg - Tank capacity approx. 110 liters - Hand guard grille in the control panel area and opposite - Straight version of splitting table - Documentation in German (2x: 1x in text form, 1x on CD) - Colour scheme RAL 5012 – light blue Protective grille/knife beam RAL 1028 melon yellow Machine in stock – immediately available Price and further information upon request.

Condition: new, - Motor power 15kW - Control SPS supported, with two-hand safety circuit - cutting force 50to Hfedpefbx Nbefx Aageg - idle speed ca.22,3 mm/sec - Splitting table straight design - cutting channel: - max. length ca.3000mm - max. opening ca.1250mm - machine weight ca.4,8to goods to order price and further information on request

Condition: new, For splitting and shredding wound paper, cardboard, or plastic rolls on cores. - Motor power 7.5 kW / 32 amps / 5-pole – 50 Hz-3LNPE - PLC-based control with two-hand safety switch - Cutting force 30 tons - Cutting speed 17.3 mm/sec Cutting channel designed for: - Max. roll length 1500 mm - Max. roll diameter 1200 mm - Machine weight approx. 3000 kg - Color RAL 5012 - light blue Further information and price upon request Order item Hedpfxof S Ir Us Aagefg

Condition: new, - Motor power 9 kW - PLC-controlled, two-hand safety operation - Cutting force 35 tons - Straight splitter table - Cutting channel: - max. blade length L = 2000 mm - max. opening H = 1200 mm Hfedpfx Aogl Ac Sjageg - Machine weight approx. 4 tons - Color RAL 5012 – light blue - Hand guard mesh at the control panel area and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request

Condition: new, Year of construction: 2025, Motor power 7.5 kW - Cutting force 30 t Cutting channel designed for - max. roll length 1500 mm - max. roll diameter 1250 mm - Machine weight approx. 3800 kg - Tank capacity approx. 110 litres - Hand protection guard in the area of the control panel and opposite Hsdpfeltmi Sjx Aagjfg - Knife locking mechanism - Splitting table, straight design - Documentation supplied twice in German (1x printed, 1x USB) - Colour: RAL 5012 - light blue Protective guard/knife beam RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Condition: new, Year of construction: 2025, Engine power 7,5kW - Cutting force 30to Cutting channel designed for - max. roll length 1500mm - max. roll diameter 850mm - machine weight approx. 3500kg - tank capacity approx.110liter - hand guard in the area of the control panel and opposite to it -knife lock -splitter table straight execution -documentation 2-fold German ( 1x text form, 1x CD ) Hodpegl Adzefx Aagsfg -color RAL 5012 - light blue protective grid/knife bar RAL 1028 melon yellow machine in stock and immediately available Price and further info on request

Year of construction: 2022, condition: ready for operation (used), A GSW decoiler is available. Load capacity: 3000kg, strip width: 650mm, max. strip cross-section: 107.5mm/0.35mm, machine dimensions Y/Z: approx. 1150mm/2000mm. An on-site inspection is possible. Hjdpfx Asyz Apwoagofg

Condition: used, functionality: fully functional, Year of construction: 2010, coil inner diameter: 280 mm, coil outer diameter: 850 mm, coil weight: 1,000 kg, coil width: 1,250 mm, Manual reel / strip uncoiler with transport rollers Note: Price refers to the sale of the depicted sheet metal Hfodpfx Asy Dc N Njagog

Condition: good (used), Double reel, reel, unwind reel Hjdpfx Asylil Ejagofg -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg