Reelsplitter

Klanke RGS50A Supercut

Condition: as good as new (ex-display), Year of construction: 2018, For sale is a wood chips and sawdust drying technology with a capacity of 400 kg / hour, together with a raw material feeding system. The machine is brand new and has not been commissioned. Gjdpfotpxy Tox Anrobl

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rotor length: 2190 mm Rotor circle diameter: 745 mm Gedpfxjw Tk E Ae Anrebl Rotor speed: 50 Hz: 58 rpm Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Gbodpfevf E Avex Anrsl Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, - Engine power 7,5kW - cutting force 20to Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm - machine weight approx. 2500kg Gjdpfjftnt Nox Anrobl - tank capacity approx.100Liter - hand guard in the area of the control panel and opposite to it -colouring of body RAL according to customer's request protective grid/knife bar RAL 1028 melon yellow Ordered goods Price and further information on request

Condition: new, Klanke roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Blade protection -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 1500mm Cutting channel opening: 1200mm Motor power: 7,5kW Cutting force: 30to Gjdon Hyxlspfx Anrebl Ordered goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, Year of construction: 2025, Motor power 7.5 kW - Cutting force 30 t Cutting channel designed for - max. roll length 1500 mm Gsdpeltmi Sofx Anrsbl - max. roll diameter 1250 mm - Machine weight approx. 3800 kg - Tank capacity approx. 110 litres - Hand protection guard in the area of the control panel and opposite - Knife locking mechanism - Splitting table, straight design - Documentation supplied twice in German (1x printed, 1x USB) - Colour: RAL 5012 - light blue Protective guard/knife beam RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Year of construction: 2021, condition: ready for operation (used), functionality: unexamined, Basic package Selector 800 Lower belt BB 1350 mm AA 6.4m -profiled belt- SPIRAL SHAFT SCREEN COVER AA254-150 - 16 shafts Gsdpevm Upnefx Anrobl

Condition: used, mileage: 1 km, first registration: 06/2012, fuel type: diesel, overall weight: 15,850 kg, color: red, total width: 2,550 mm, total height: 2,500 mm, Equipment: had accident, Damaged! Tank capacity: 8000 L water or 1000 L foam agent (integrated), water and foam tanks each with their own manhole cover, overflow, drainage, level indicator, and suction sump. Pump N55, water-cooled DEUTZ diesel engine, diesel tank 200 L, FIXMIX 3-stage foam proportioning (1%, 3%, 6%), electric water monitor RM60 incl. cable remote control, pump and monitor operation also possible from the carrier vehicle, electric foam agent pump (24V), tank filling connectors, battery charger incl. 230V supply, NATO socket 24V, roof lighting. Godpfx Aehgtztenrebl PA913

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Gbodjrnnt Iepfx Anrol Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: new, - Motor power 9 kW - PLC-controlled, two-hand safety operation - Cutting force 35 tons - Straight splitter table - Cutting channel: - max. blade length L = 2000 mm - max. opening H = 1200 mm Gsdpfxsgl Ac So Anrobl - Machine weight approx. 4 tons - Color RAL 5012 – light blue - Hand guard mesh at the control panel area and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request