Type: LDC 160
Manufacturer: Šmeral
Year of production: 1989
Climatic design: N
Nominal force: 1570 kN
Max. number of strokes: 45 / min
Individual strokes: 25 / min
Ram stroke: 160 mm
Ram adjustment: 100 mm
Weight: 17 500 kg
Bgy07rpd0k
Grip: 500 mm
Passage: 1600 mm
Table clamping surface: 2000x780 mm
Ram clamping area: 1550x630 mm
Ram adjustment: 100 mm
Total installed power: 17.5 kW
Machine dimensions h * w * d: 3,6 * 2,4 * 2,3
The machine is in good technical condition, by prior arrangement the possibility of testing. GO electrical installation 2014, 2018 - replacement of inserted wheel and pinion Dimensions of the machine (from 0 l, W, H) - 5320 mm x 2530 mm x 9000 mm Weight of the machine - about 210 t Functionality of the machine - machine function OK (except cushion - not working, not connected).
Cmqehouw
Crank press HECKERT PKZ 400.1 built in 1980.
Technical data :
- maximum pressing force: 400 t
- working path - lower position of the slider to the maximum pressing force: 21 mm
- maximum drawing depth: 125 mm
- pressing force using the maximum drawing depth: 160 Mp
- idle speed of the slider: 18 min-1
- maximum number of switchings: 9 min-1
- ram stroke (min-max): 315 mm
- slider adjustment: 200 mm
- holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2
- force of the drawing d...
Catalog No. : 5335
Type: PKZZ 1000
Producer: VEB ERFURT
Made in: 1962, GO 1999
Characteristic:
Pressing force: 1 t
Length of the table: 4000 mm
Width of the table: 2100 mm
Distance between frames: 4000 mm
Door size: 4700x4000 mm
Ram stroke: 500 mm
Gxfulk
Adjusting the ram: 180 mm
Power input: 75 kW
Machine weight: 145 t
2019: new motor and resistors
Press Raster mechanical, transfer HR 200 NL 4S
Bs0h2r87mz
Manufacturer Germany Raster
Press weight 41000 kg
Forming force 200 tons
Table area 1500x900 mm
Stroke 120 mm
Lifting speed 40 - 200 / min
With accessories: feeder, straightener, unwinder
modernized 2007 with SIEMENS 7
Max Capacity: 1000 tons
Bed/slide Size: 4500 x 2500m
Stroke: 864 mm
SPM: 8 15
Adjustment: 356 mm
Max. daylight: 1.380 mm
Bed-Cushion: 300 tons / 0 - 305 mm
Slide-Cusion: 100 tons / 152 mm
Distance between Columns: 4.877 mm
Bosc8kkvbn
Hot forging 1600t press after refurbishment at the original manufacturer factory.
Will be ready for trials in July.
B0iaed08
Condition "as new".
6 months guarantee period.
Total weight 116 ton.
Heviest parts: - Bed 30 ton, table - 21 ton.
General repair 2001
Dimensions: 3 000 x 2 000 x 4 000 mm (width x length x height)
Weight: 16.300 kg
Table: 1 000 x 700 mm
Ram1 000 x 700 mm
Oj8uz
Nominal pressure: 1 600 kN
Max. number of strokes: 150 / min.
Output of electric motor 18,5 kW
Ram stroke: 30 - 200 mm
Max. height pressed tool: 490 mm
Crank press ZAMECH PKRR 400A built in 1974.
Technical data :
- pressure: 400 tons
- clearance between stands: 1020 mm
Cjqybyuw
- ram stroke: 315 mm
- number of strokes per minute: 20
- maximum distance of the slider from the table closed: 742.5 mm
- slider adjustment: 250 mm
- table dimensions: 1020 x 1050 mm
- main engine power: 40 kW
- main engine revolutions: 1500 1 / min.
- weight of the press: 40 t
Double stand crank press PIESOK LU 160 / 630
Manufacturer: Strojarne piesok (Czech)
Type: LU 160 / 630
Main technical data:
Capacity: 160 T
Shut height: 630 mm
Ram stroke: 125 mm
Number of strokes per minute: 33
Installation height: 510 mm
Pojwzn7t
Tappet adjustment: 110 mm
Table: 625 x 795 mm
Plate thickness: 110 mm
Number of electric motors: 2
Motor power: 22 kW
Machine dimensions:
1575 x 2040 x 4035 mm
Machine weight: 9725 kg
For more information please contact us.
General repair in 1996 Smeral Czech republic
Rated force 5000 kN
Passage 2800 mm
Ram clamp 1000 mm
Ram stroke 500 kN
Slide adjustment 180 mm
Lower ejector force 160 kN
Lower ejector stroke 200 mm
Working surface of the ram 2530 x 1800 mm
Table working surface 2800x1800 mm
Performance hl. engine 110 kW
Press weight 98000 kg
No accessories
Ekebjrp
This is a mechanical crank press made in Derby, England.
Capacity is 96 tons.
It has a long-stroke (19” – 480mm), and plenty of ‘daylight’ in the work area. The square hole in the base allows excellent flexibility of tooling and types of work.
The clutch is pneumatic, and can be disengaged at any time throughout the stroke, with the brake stopping the press in short order.
Stands 4.7m high with the motor on, and 4m without the motor. Estimated weight 7 tons.
Btans3ssqi
This machine came to Auc...
1975 (general repair 2001)
Dimensions: 3 000 x 2 000 x 4 000 mm (width x length x height)
Oi2ld
Weight: 16.300 kg
Table: 1 000 x 700 mm
Ram: 1 000 x 700 mm
Nominal pressure: 1 600 kN
Max. number of strokes : 150 / min.
Output of electric motor: 18,5 kW
Ram stroke: 30 - 200 mm
Max. height pressed tool : 490 mm
Crank press KB 9534 Russian, built in 1986.
Technical data :
- pressing force: 250 t
Bpxk3hosm3
Large Mechanical Crank Press Upsetter available.
This press is designed to forge flanges on shafts, make big bolts and other big metal components in a single 2-second cycle.
Capacity: 1200 tons (main vertical crank), 600 tons (side-acting clamp)
Weight: 112 tons
Manufacturer: Coventry Machine Tool Co, England (Circa 1940's)
Cast steel frame. New bronze bearings in flywheel.
Currently installed and working, but MUST find a new home as soon as possible as land has been sold for development.
Bsgbrb...
pressure 60 t
stroke 380 mm
table surface area 750 x 260 mm
press capacity 588 kN
Pressure power 259 bar
Fg9qx9eb3
working width 750 mm
pressing speed 2,07 mm/sec
feed speeds 8,69 mm/sec
return speed 10,79 mm/sec
Ø 210 mm
total power requirement 1,5 kW
weight of the machine ca. 0,6 t
dimensions of the machine ca. 1,3 x 0,8 x 2,1 m
This 60 ton motorized workshop press with sliding cylinder is very robustly
built and manufactured in the Netherlands. The hydraulics work extremely
precisely in...
In this offer you will purchase a used colour production system "Xerox Colour J75 Press
Object of sale:
1 x Xerox Colour J75 Press with the following equipment:
incl. Squarefold
Bk9ah3g8ak
incl. Impose Fiery Edition
incl. booklet finisher JFN-1
incl. booklet finisher LFN-7
incl. booklet finisher ZYC-1
incl. Send Kit Fiery EX-J75
counter readings:
Total: approx. 1,611,042 pages
Colour: Approx. 793,022 pages
Black: Approx. 818,020 pages
Condition:
This offer is f...
pressure 160 t
distance between columns 1100 / 1500 (Option) mm
Benmvslzfo
stroke 400 mm
working feed 2,4 mm/sec
700
slide adjustment -horizontal 2150 mm
tank capacity min 30 l
feed speeds 7,48 mm/sec
pressing speed 2,4 mm/sec
return speed 9,35 mm/sec
Pressure power 255 bar
table-size 1740 x 996 mm
total power requirement 3 kW
weight of the machine ca. 2185 t
dimensions of the machine ca. 1,74 x 1,73 x 2,185 m
This Profi Press portal press with a manually movable portal is made in the Nethe...
pressure 50 t
stroke 250 mm
throat 265 mm
table: 700 x 450
ram surface 550 x 300 mm
total power requirement 4 kW
Beojfhitbb
weight of the machine ca. 1,7 t
The Cold Press No.1 squeezes more gently than other juicing methods. Fruit and vegetable juice is extracted without crushing the cells too much or creating undesirable heat.
Iqioquz
pressure:400 t
distance between columns:1060 mm
stroke:450 mm
no. of strokes:15 - 30 /min
distance table/ram, max. stroke up, adjustment up:1160 mm
table surface area:1000 x 700 mm
capacity of ejector in table:2 x 16 t
ejector stroke of ejector in table:125 mm
Die cushion pressure in table:120 t
Die cushion stroke in table:2 mm
capacity of ejector in ram:2 x 4 t
stroke of ejector in ram:100 mm
ram surface:1000 x 700 mm
column travel -side:630 mm
power capacity:55,0 kW
weight:50,0 t
die cushion i...
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
voltage 400 V / 50 V
adjustment movement hydraulic up to 120 mm
motor speed 1400 U/min
total power requirement 1,5 kW
Tlvmt3hi
weight of the machine ca. 430 kg
dimensions of the machine ca. 1200 x 800 x 1750 mm
In this offer you acquire a used colour production system "Minolta Bizhub Press C1100".
Item for sale:
1 x Minolta Bizhub Press C1100 with the following equipment: -incl. PF-707 large capacity magazine with suction feeder for up to 3x 3.240 sheets up to A3 oversize format
-incl. RU-511 cooling/smoothing unit
-incl. SD-506 booklet finisher
-IC-308 External EFI Fiery PRO80-25 print controller included
-incl. HM-101 Humidifier
-incl. FS-532 Staple Finisher
Meter readings:
Total: Approx. 6...
pressure 300 t
distance between columns 2560 mm
stroke 400 mm
working feed 3,8 mm/sec
piston stroke 300 mm
Benmu9jn7m
700 mm
adjustment of press crosshead 2000 mm
slide adjustment -horizontal 3000 mm
tank capacity min 30 l
feed speeds 9 mm/min
pressing speed 2 mm/sec
return speed 15 mm/sec
total power requirement 10 kW
weight of the machine ca. 13 t
dimensions of the machine ca. 3,5 x 3,05 x 2,9 m
⢠Minimal footprint
⢠Height continuously adjustable
Bjfhulirbn
⢠Suitable for 2- and 4-up
Low-cost shipping The Smart Stacker XXS has been developed in order to enable CtP users in the 2- and 4-page format a space-saving and cost-effective possibility of plate stacking. On a footprint of only 640 x 658 mm, up to 100 plates are automatically stacked by that stable âlightweightâ made in Germany. Low-cost shipping due to a package size of 118 x 78 x 17 cm (L x W + H) and weight of only 1...
Spindle Press Krause KgS
Year - Serial-No. KgS
Jiciqnz
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
pressure:400 t
distance between columns:1100 mm
stroke:250 mm
no. of strokes:25 - 75 /min
distance table/ram, max. stroke up, adjustment up:900 mm
2wdpz2jj
table surface area:1100 x 965 mm
capacity of ejector in table:30 t
ejector stroke of ejector in table:80 mm
capacity of ejector in ram:3 t
stroke of ejector in ram:60 / 70 mm
ram surface:980 x 800 mm
column travel -side:800 mm
ram adjustment:20 mm
power capacity:80,0 + 5,5 kW
weight:47,0 t
Dimensions (WxDxH):3,5 x 3,3 x 6,0 m
weight of switch...
pressure 100 t
stroke 380 mm
table: 1740 x 996 mm m
daylight between the columns 1050 mm
daylight - vertical 600 mm
total power requirement 2,2 kW
weight of the machine ca. 1,6 t
Gvufe0
dimensions of the machine ca. 1,7 x 1,7 x 2,2 m
In this offer you acquire a used colour production system "Xerox 800 Colour Press ".
Item for sale:
1 x Xerox 800 Colour Press with the following equipment:
incl. 2x large capacity stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. Free Flow Controller
Hvxumcy
Counter readings:
Total: Approx. 17,171,752 pages
Colour: Approx. 15,509,952 pages
Black: Approx. 1,661,800 pages
Condition:
This is a used machine and may show signs of use (minor s...
pressure 50 t
490,5 kN
Pressure power 399,5 bar
140 mm
working width 1100 mm
Dimensions (HxWxD) 2050 x 760x 1100 mm
column daylight 750 mm
distance between columns 300 mm
piston stroke 160 mm
Bjtom0pnpl
weight of the machine ca. 309 kg
Forging line INVER PRESS LECCO 100 T built in Italy. Brass forgings were made on the line from a solid rod fi 19. After swelling, we get a diameter of fi 24. Product lengths: from 25 to 50 mm.
The forging line consists of the following devices:
1. INVER PRESS LECCO 100 TON forging press, eccentric with pneumatic clutch, pressure: 100 tons
- dimensions of the eccentric press (width x length x height): 1750 x 1100 x 2100 mm
2. AMYSA WMU V-10x induction device made in Italy:
- induction heating ba...
Spindel Press Krause
Year - Serial-No. 190675
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
Eoaxjnybs
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Table size 2500 x 1300 mm
Total thrust 70 Ton
Stroke – total opening 400 mm
N. 4 of cylinders
Pistons D 70 mm
Approx. weight 2400 kg
Fabricated assembled steel platen max. temp up to 120 ° C max working pressure 3-5 kg/cm2
Heating medium pressure 2,5 bar, it is composed by:
Vqos9i
G) ALUMINIUM COVERING FOR A BETTER SURFACE FINISHING AND A BETTER HEAT PROPAGATION
H) FLAT GAUGED STEEL SHEET
I) Coil of piping for hot water/oil circulation
J) Reinforcement piping
K) Flat gauged steel plate, only f...
Unique Cold Hydraulic Presses Specially Designed for Engineered Wood Flooring (Parquet) Production
Technical parameters of our standard MK2 models:
- Max gluing widths - From 200 to 320 mm (Up to 500 mm upon order)
- Max gluing length - 2560 mm to 3840 mm (Unlimited upon order)
- Max gluing height - 800 mm
- Working height - From 800 to 850 mm
- No of pressing cylinders (total) - From 16 to 24 pcs (Unlimited upon order)
- No of independent pressing cycles - From 4 to 12 cycles (unlimited upon ...
In this offer you acquire a used colour production system "Xerox 800 Colour Press ".
Item for sale:
1 x Xerox 800 Colour Press with the following equipment:
incl. 2x large capacity stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. Free Flow Controller
Counter readings:
Total: Approx. 17,171,752 pages
Colour: Approx. 15,509,952 pages
Black: Approx. 1,661,800 pages
F0tcajgd
Condition:
This is a used machine and may show signs of use (minor ...
pressure 30 t
stroke 160 mm
table surface area 560 x 255 mm
table length 695 mm
table width 230 mm
Pressure power 374,6 bar
Fhjpujh2k
piston stroke 160 mm
tank capacity 1,5 l
column daylight 560 mm
diameter of piston 110 mm
weight of the machine ca. 175 t
dimensions of the machine ca. 830 x 640 x 2030 m
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
Hidraulic press, FLui Press, 2 colonne, 9 tones, 2,2kw
Geakunlio
Press-vite ironing / steam table 4 whirlpool hoods, 9000W BJ. 2002, Pr12LP +.
Dv7r7m
You buy a hanger system
Ironing / steam table press vite, with 4 adjustable hot tub covers, and 2 steam generator / en working width approx. 340 cm, 380VPr12LP - 9000W
BJ 23.10.2002
Control GE VAT20 U20NOK7S
BJ. 16.02.2002
Find more articles in our shop!
Article number 17746;
For inquiries please specify;
Eccentric press Make V & O Press Type FO 43 built 1980
Serial number 25ST-593 Pressing force approx. 25 tons
Bkjhd8j3zf
In this offer you acquire a used colour production system "Xerox Rialto 900 Inkjet Press ".
The Rialto 900 closes the gap between high-speed inkjet production printing systems and cut sheet systems with toner technology. It combines the speed and economical cost per page of inkjet technology with high print quality and low investment costs.
Item for sale:
1 x Xerox Rialto 900 Inkjet Press with the following equipment:
incl. Double Stacker
incl. cutter
Original price: 710.000€
Meter read...
pressure 15 t
stroke 160 mm
press capacity 147,15 kn
Pressure power 382,2 bar
column daylight 555 mm
80
tank capacity 1,5 l
Vy2xfohj
distance between columns 134 mm
weight of the machine ca. 134 kg
dimensions of the machine ca. 825 x 600 x 1880 mm
Unique Cold Hydraulic Press Specially Designed for Engineered Wood Flooring (Parquet) Production
Deck Art MK1 (first generation) Cold Press CP 250/2500 (3800)
Technical parameters:
• Max gluing width - 250 mm
• Max gluing length - 2500 (3800) mm
• Max gluing height - 850 mm
• Working height (static) - 800 mm
• No of pressing cylinders (total) - 16 (24) pcs
• No of pressing cylinders per cycle - 4 cycles x 4 cyl. (4 cycles x 4 cyl.; 4 cycles x 2 cyl.)
• No of independent pressing cycles - 4 (8...
Cutting length: mm 3100
Cutting thickness: mm 4
Recess: mm 500
Steel basement supports sheet metal.
Motorized rear register.
NEW MAPER programmer for rear register stroke visualization.
Cutting angle adjustment.
Bmc9kvfx0x
Cutting blade stroke adjustment.
Sheet-metal support brackets supplied.
Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014.
Lydy8clb
frame hydraulic press WEGOMA
Dgjnj29
Workspace: width 3600 mm height 2500 mm
the amount of lateral hydraulic cylinders 3
pieces top two pieces beam mechanically Move
Mechanical compression setting
more photos an questions
In this offer you acquire a used 5-colour production system "Xerox 1000 Colour Press".
Item for sale:
1 x Xerox 1000 Colour Press with the following equipment:
incl. Stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. FreeFlow Controller
Counter readings:
Ykguo
Total: Approx. 5,265,956 pages
Colour: Approx. 4,754,305 pages
Black: Approx. 511,651 pages
Condition:
This is a used machine and may show signs of use (minor scratches or yellowing)...
pressure 220 t
distance between columns 2065 mm
stroke 400 mm
working feed 3,8 mm/sec
piston stroke 300 mm
700 mm
adjustment of press crosshead 1500 mm
slide adjustment -horizontal 2500 mm
tank capacity min 30 l
feed speeds 13 mm/sec
pressing speed 2,7 mm/sec
return speed 24 mm/sec
Benmvi0trn
total power requirement 10 kW
weight of the machine ca. 13 t
dimensions of the machine ca. 3,5 x 3,05 x 2,9 m
Good working condition
Manufactured in Romania
YOM: 1986
Mechanical
Pressing nominal force: 10,0 MN
Number of strokes/min: 20
Ram stroke: 310mm
Work surface: 2290mm x 1600mm
Total dimensions: 7880mm (6880 from the ground) x 4150mm x 2350mm
Brg0g2i9k7
Total weight: 108009kg
Dimensions:
L3bigh2g
2750x1700mm
T-nut plate: 2440x1520x230mm
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
How to receive 100% of our e-mails
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Morlock Motors official partner of Machineseeker and Truckscout24
