Used Crank for sale (584)

Condition: used, Year of construction: 1950, machine/vehicle number: 26284, functionality: unexamined, power: 1.6 kW (2.18 HP), pressing force: 30 t, overall weight: 1,100 kg, We offer this used Raskin 30TRG crank press, year of construction 1950. Machine has not been used for 30+ years and was sitting in a corner of the workshop under a tarp. Now it must go. Dcodpfxeza En So Aa Hsl Untested and condition unknown, but was working when put aside, and externally looks in working order. Included is the punching tooling visible on the pictures (on the pallet + cardboard box).

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. Dsdpfx Aev E Rm Hea Hecl New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, briquette diameter: 50 mm, overall weight: 2,000 kg, Crank-driven briquetting press BL250-50 Dcjdpfszt H Swsx Aa Hsl briquettes with a diameter of 5 cm Output: 250 kg/hour.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, STANDARD FEATURES - REJECT CONVEYOR • Reject, inspect, and by-pass modes selectable. • Conveyor width adjustment using a hand crank. • Controlled by a PLC. • CE certified. OPTIONS • Non-standard conveyor/segment lengths • Electrical conveyor width adjustment. • Automatic conveyor width adjustment • Additional lift positions for extra buffer capacity • Inspection interval counter • Light fixture • Alarm buzzer. Dcsdozy N Rpopfx Aa Hsl • Other options available upon request SPECIFICATION Transfer height 950 mm ± 25 mm* Colour RAL 9002* Flow direction Left to right* Fixed rail Front* Machine interface SMEMA* Conveyor concept ESD belt Belt speed Variable 2-14 m/min. PCB edge support 3 mm Component clearance Bottom 30 mm, top + bottom = 65 mm max. (belt to belt) Power supply 230 VAC/50 Hz/1 Ph Power consumption 150 VA max. Air supply 4-6 bar Air consumption 10 ltr/min max. Machine L x W x H (mm) 1000 x 875 x 980 Weight (Kg) 95 PCB Length (mm) 80 - 460* PCB Width (mm) 50 - 460* Fixed rail to front (A) (mm) 186

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, Important note! Dodpfx Aaozuvwle Hecl Payment for the machine, as is customary with used machines, is made in full before loading, no partial payments or installments! HENRI HAUSER OP3 High-precision drilling machine / Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine / jig boring machine with tool package (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the need for tedious manual adjustment of the individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. Two heaters are provided for this purpose, which can and must be switched on separately before starting work to maintain high accuracy and dimensions. This explains the factory-high positioning accuracy of 0.002 mm with a resolution of 0.00. It should be noted that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and facing at depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again. These machines are primarily used in the watch industry, gunsmithing / defense industry, precision engineering, material testing and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical wiring diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mounting MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm Machine weight approx. 1500 kg. Shipping (direct transport without reloading) within the EU is possible. Price net for export within the EU. Example: Secure shipping by direct transport (without reloading!) to France/Spain/Italy, etc. up to 1700 km distance approx. EUR 1100 - 1450.

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Dedpszdpvgefx Aa Hjcl Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue pots, joining, corner copying, and two scraper blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness approx. 0.4 - 3 mm Workpiece height approx. 10 - 40 mm Feed speed approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100mm, 4x80mm including the ductwork shown, connecting to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Top pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue pots for quick color change from white to transparent Gluing section with automatic edge feed for roll material up to 3 mm Pressing zone with 3 rollers Miter saw with 2 motors Combination router unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius scraper blade R2, manually adjustable Glue joint scraper blade with large roller, pneumatically controlled Hood locking mechanism Dcjdpfjzn Afpex Aa Hel CE marking Operating manual in a folder All indexable inserts of the router units and scraper blades have been renewed or re-sharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been renewed, but is still sharp. Original paint, with only a few spots touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on-site after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top Dcjdpfx Aajzpbrqs Hsl - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Year of construction: 2018, condition: used, Manual length adjustment via hand crank Dedpfx Aaozx U Nno Hecl For attachment to any Elumatec single-head saw (right) Max. feed length: 3,000 mm

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Dodjwgm Hkspfx Aa Hecl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton Dedpfxezcptwe Aa Hscl • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided • Drawing cushion: Integrated • Counterbalance cylinders: Yes • Safety system: Integrated • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2016, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2016. This AIDA 315/2MR/LD/TE3 features a press capacity of 315 tons and a stroke length of 250 mm. It includes a maximum die size of 2,250 × 750 mm and a maximum die weight on slide of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE3 machine we have for sale. Contact us for further details. Dodpfx Aszcpwija Hscl • Main technical data: • Press capacity: 315 ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Normal crankshaft stop position: TDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: double upright (straight-side) frame • Drive system: double connecting rod (double pitman) • Slide guidance: guided slide • Motion type: mechanical crank press • Slide movement: vertical reciprocating motion • Main axis movement: rotary crankshaft drive • Ram/slide adjustment: motorized • Cushion system: • Type: integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) • Clutch & brake system: pneumatic • Lubrication system: centralized automatic lubrication • Safety system: integrated • Operator protection: included • Automation ready: yes • Performance and safety highlights: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Integrated safety and operator protection systems • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: used, Year of construction: 1963, machine/vehicle number: 023-0281, Item No. 21275 Manual Swing Bending Machine Technical data: - max. working width 1030 mm - max. material thickness 2 mm - bending angle approx. 0 - 135° - lockable with end stop - upper beam is operated with a lateral hand crank - max. stroke of upper beam 120 mm - max. adjustment of bending beam 45 mm - bending process is supported by an eccentric weight - space requirement approx. W 1750 x H 1120 x D 450 mm - weight approx. 620 kg Dedpfx Aezy Rg Sja Hocl

Condition: ready for operation (used), Year of construction: 2012, stroke length: 250 mm, Mechanical stamping press manufactured in 2012. This Colombo Agostino T231A315 features a nominal press capacity of 315 tons and a slide stroke of 250 mm. It includes a motorized slide adjustment of 315 mm and a bed dimension of 1120 mm x 960 mm. If you are looking to get high-quality stamping capabilities, consider the Colombo Agostino T231A315 machine we have for sale. Contact us for further details. • Main motor power: 32 kW • Stroke speed (min - max): 15 - 30 strokes/min • Slide stroke (working travel): 250 mm • Slide (ram) adjustment: 315 mm (motorized) Dedpfx Ajzcywasa Hscl • Shut height (max. closed die height): 650 mm • Shut height (min. closed die height): 335 mm (max. shut height minus slide adjustment) • Bed (bolster plate) dimensions: 1120 mm x 960 mm • Slide (ram) face dimensions: 1120 mm x 960 mm • Bottom cushion stroke (max): 160 mm (integrated) • Slide guidance: Precision guided ram system • Bed configuration: Fully machined bolster plate • Lubrication: Centralized automatic lubrication system Additional equipment • Feeding system: Coil/feeding line included • Optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: used, axle configuration: 2 axles, loading space length: 110,500 mm, loading space width: 25,100 mm, loading space height: 10,000 mm, Year of construction: 2009, Equipment: ABS, = Additional Options and Equipment = Dedpfx Aeyfp H Noa Hscl - EBS - Electronic Braking System - Rear air suspension - Front air suspension = Notes = For vehicle inquiries, please contact Mr. Seidel (by phone at CY NV 1214/20T/37). Crane: Palfinger 44002, radio remote control, support legs middle and rear, pallet tongs, additional spotlights: vehicle rear, crane, air suspension, BPW axles, drum brakes, Tridec steering, both axles steered, central lubrication system, handbrake crank, cargo space dimensions: length 11,005 mm, width 2,510 mm, height 1,000 mm, tire tread depth: 1st axle: 10–12 mm, 2nd axle: 11 mm. If desired, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be pleased to assist you. For further information, please visit our homepage. ... Subject to errors, changes, and prior sale !!! Steering axle = Further Information = Unladen weight: 16,320 kg Payload: 20,680 kg gross vehicle weight (GVW): 37,000 kg Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking Dodpozrppcsfx Aa Hocl moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CON.07.10.0154, compressed air connection: 8 bar, input voltage: 230 V, total width: 1,329 mm, total length: 1,150 mm, total height: 1,725 mm, overall weight: 812 kg, pneumatic connection: 8 bar, Equipment: documentation/manual, 6-color pad printing machine from the manufacturer TAMPOPRINT, model Concentra 60-6 Max. printing area diameter (circle diameter) 55mm, total of 6 colors Year of manufacture 2010, weight 812 kg Air consumption 48 standard liters per cycle Good overall condition, machine fully functional, minimal air loss on one of the main valves. Visual condition as shown in the current photos. Scope of supply: TAMPOPRINT Concentra 60-6 as a stand model + Foot pedal + Hand crank for height adjustment of the tilting table + 6 used ink pots 60mm + 6 used printing rings (for the ink pots) + 2 used mounting tables (for ink pot and cliché mounting) + 2 used gripper tongs (for ink pot and cliché mounting) + 2 used pad coupling devices plus mounting screws (4 pad coupling devices still need to be purchased) + 1 heavy-duty hook for transporting the machine + Documentation (operating manual, parts list, wiring diagram) Option 1 Dcodpfjzwv Rwox Aa Hel 6 additional used ink pots 60mm, EUR 420,- excl. VAT. Option 2 4 pad coupling devices (new) from the manufacturer, EUR 1,098,- Packaging: The machine can only be packaged by wrapping it completely in cardboard and bubble wrap; it will not be placed on a pallet. The pad printing machine can be inspected and tested in Pottendorf by appointment. Delivery: Ex works Pottendorf (Austria). For collection, only trucks with a tail lift are permitted; please note the machine's weight. The transport of this machine is at the buyer's expense and risk. Packaging costs EUR 120,- Selling price EUR 18,200,- excl. VAT. New price approx. EUR 70,000,-

Condition: good (used), Year of construction: 1979, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 110 - 1450 U/min table-size Ø 455 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 m/min spindle taper MT 4 MK engine output 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Features: - Heavy-duty column drill press (V-belt drive) - Automatic spindle feed - Infinitely variable speed control - Fixed depth stop - Round machine table with T-slots * Height-adjustable via hand crank * Rotatable Dcjdezl E Tkopfx Aa Hsl - Emergency stop button on the front - Coolant system with separate reservoir - Operatorâ??s manual

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. Dedpfx Aaoihiiio Hocl komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 Dodpfx Aoy E T Dgea Hecl - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Dsdpfsx Ik Tdjx Aa Hocl There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface Dcedpfx Aaoxcbpij Hel - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: used, Year of construction: 1994, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 55 - 1450 U/min taper MK 4 column diameter 145 mm Dsdpfozu Tk Nsx Aa Hscl total power requirement 2,2 kW weight 500 kg dimensions 800 x 1000 x 2000 mm Features: - Heavy-duty pillar drill - Infinitely variable speed control (V-belt) - Automatic spindle feed * with electromagnetic engagement - Pole-changing motor - Right/left rotation of the drill spindle - Fixed drilling depth stop - Machine table with 2 T-slots * height-adjustable via hand crank - Coolant system - Machine vise - Drill chuck - Emergency stop

Condition: ready for operation (used), Alzmetall AB 35 HST / Bench drill press & Walter Gras Arbo3 quick-change head -Drilling capacity / steel approx. 40mm -Drilling capacity / cast iron approx. 45mm -Threading capacity max. M25 -Spindle taper MK 4 -Spindle stroke 180mm -Speed range (VARIABLE) 65 - 1750 rpm -Switchable speed range 130-480 / 480-1750 rpm -Automatic feed rates 0.1-0.2-0.3mm/rev -Drilling depth adjustable via depth scale -Speed indicator -Right / left rotation -Swiveling drill head with tool -Height-adjustable work table via hand crank Djdezn Unvspfx Aa Hecl -Coolant system -Emergency stop -Work light Dimensions: L x W x H 1 x 0.8 x 2.1 meters / Weight approx. 1200KG Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2025, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm Djdpfx Aajztfbwe Hecl -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.