Used machining centers (vertical) X-axis travel 800-999mm for sale (177)

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: Djdpfxjzw Tw Ue Aqvjcp The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 2002, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, spindle nose: HSK E50, number of slots in tool magazine: 30, Equipment: chip conveyor, Machining Center - Vertical Manufacturer: MIKRON Type: HSM 800 Year of manufacture: 2002 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle speed: 36,000 rpm Tool holder: HSK E50 Number of tool stations: 30 Machine weight: approx. 9,500 kg Condition: used Technical features & accessories: - Workpiece magazine with 4 stations - Chip conveyor - Oil mist/air filtration system - Water chiller Accessories, tools, and clamping devices shown are included in the scope of delivery Dcodpo Ah T Tyefx Aqvsp only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 107.44.00.072, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 20 m/min, workpiece weight (max.): 500 kg, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron UCP 800 Duro – 5-axis CNC machining centre Dsdpjwww Rhsfx Aqvscp We offer for sale a precise 5-axis CNC machining centre Mikron UCP 800 Duro from the renowned Swiss brand GF Machining Solutions. The machine is perfect for machining complex parts, moulds, dies, and components that require the highest precision and surface quality.

Condition: used, Year of construction: 1998, We are offering this used Hermle U 630 S vertical machining center, manufactured in 1998, for sale. Unfortunately, due to space constraints, we need to have the machine removed in week 44. The machine can be loaded for transport this week. If you have any questions or require further information, please feel free to send us a message or call us. Dcsdez Tkc Ejpfx Aqvep

Condition: like new (used), Year of construction: 2022, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Here’s the very 1st used MACH 845-8T Toolroom VMC to appear on the 2nd hand market! This low hours, highly spec’d and immaculate example is equipped with DynaPath’s Windelta touch screen control has been rented to a FE College and is now availabel for sale...its in as new condition, has an 8,000RPM spindle, 8Gb memory, 1,000 blocks of look ahead and is Wi-Fi enabled for remote support from MACH & DynaPath..(that’s included on this used machine tool ) Taken from MACH Machine Tools marketing material, they say; This small footprint, high build and component part quality toolroom VMC features MACH’s cleverly designed 8 position ATC that’s arrange around the 10,000 RPM spindle, for simple, efficient and quick tool changes. As with all MACH CNC machines, the MDS 845-8T is equipped with DynaPath’s feature packed Windelta control system, with touch screen user interface. The control is capable of accepting multiple programme formats via its inbuilt USB, Ethernet or wireless interfaces. It can be programmed Conversationally, via DXF, in ISO/EIA G-Code formats and has a DFX and DFX program editor in built, making the control capable of accepting and editing programmes in any machine format. As a standard feature its equipped with full Wi-Fi connectivity for remote factory support. It has a huge 8Gb of memory, 1000 blocks of look ahead, for high quality and fast 3D contouring, a solid-state hard drive, Yaskawa digital drives and servo motors and a Delta spindle drive that controls the 10,000 RPM Direct Drive spindle, all mounted in an air-conditioned electrical cabinet. Specified way beyond its price point and backed up by the now legendary, MACH-DynaPath’s worldwide Wi-Fi remote support and team of dedicated engineers. Specification: Travels: X/Y/Z: 800 / 450 / 450 mm Spindle Nose to Table: 90 ~ 537 mm Centre of spindle to column: 435 mm Spindle Taper: BT40 Spindle Max RPM: 8,000 RPM Table Size: 850 x 420 mm T-Slots: 18 x 85 x 4off Max Table Load: 220 kg Max Rapid Rate: 20 m/min Max Cutting Rate: 10 m/min X/Y/Z Axis Type: Linear rail with roller bearings + Ball Screw ATC Type: 8-Tool Independent Arm, arrange around the spindle Max Tool Dia: 63 mm Ø Max Tool Weight: 5 kg Tool Change time: (Tool to Tool) : 2.8 sec Spindle Motor: 5.5 kW (7 HP) / 35 Nm X/Y/Z Servo motor rating: Yaskawa 0.85 / 0.85 / 1.3 kW Positioning Accuracy: 0.005 um Repeatability: ±0.003 um Power requirement: 15 Kva (supplied with 415V-220V 7kVA Transformer for UK) Air requirement: 6 kg/cm3 Footprint: (LxWxH): 2200 x 2539 x 2304 mm Weight: 3750 kg Control System: DynaPath WinDelta with 15" Touchscreen LCD D11 Console, MPG Handwheels, Conversational + DXF + ISO/EIA G-Code UKAS & CE compliant safety modules, interlocks & certification. 415V to 220V 7kVA Dcjdpfxjmmgpdj Aqvep Supplied with: UKCA/CE safety enclosure, interlocks and electrical equipment, 10,000 RPM BT40 spindle, set of 8 pull studs, through spindle coolant, bed wash, coolant/air gun, swarf augers, LED machine lighting, end of cycle light stack, electrical cabinet air conditioning, MPG, 8Gb of memory, DFX File reader with program editor, 1000 blocks look ahead, Wi-Fi remote support.

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Dcjdpfx Aqezghngovep Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: excellent (used), Year of construction: 2013, operating hours: 9,300 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 520 mm, controller manufacturer: fanuc, table width: 400 mm, table height: 400 mm, table length: 1,000 mm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The machine is powered on and can be demonstrated. The measuring probe and tool measurement system are included. Dcjdpfx Aqoz Iifmevop

Condition: like new (used), Year of construction: 2020, operating hours: 16,785 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, CNC Machining Center Manufacturer: Fehlmann, Model: Picomax 95 Year of manufacture: 2020 Technical Data Make: Fehlmann Model: Picomax 95 Dcodpoy Ny A Dofx Aqvep Year: 2020 Operating hours: 16,785 total / 7,181 spindle hours Spindle speed: 50 – 18,000 rpm Spindle power: 25.2 kW Max. torque: 120 Nm at 50–2,010 rpm Control: Heidenhain TNC 640 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,600 x 550 mm, 10 slots, 12H8, 50 mm spacing XYZ positioning accuracy (ISO 230-2): A = 0.005 mm / R = 0.003 mm Electrical connection: 400 V 3P+N+E / 50 Hz / 63 A (T) Standard Equipment - Feed rate range: 1 – 30,000 mm/min (standard) - Automatic tool changer, operator side, main time parallel loading incl. Fehlmann extended tool management on TNC 640 - Direct linear measurement system with pressurized air in XYZ - Pressurized air cleaning with activated carbon filter - Coolant system with chip drawer and fine-chip filter insert, coolant spray gun, chip flushing, machine shutdown via M function - Cooled motor spindle and Y-axis drive - Spindle and thermal expansion compensation - Graphical machine diagnostics system via softkey - Drawer block, lower right - Interfaces: RJ45, USB, RS232 - 48-position chain magazine HSK-A63, double-gripper tool changer. Magazine accessible operator side, parallel to machining - Electronic handwheel HR 510 for TNC 640 - Active cooling system for motor spindle and Y-axis drive - Work area enclosure with polycarbonate safety windows; powder-coated; large-opening stainless steel sliding door at front/top for crane loading - Left side door with lockable polycarbonate windows - Chip flushing via machine bed - FEHLMANN cycle package Special Equipment - Automatic length compensation of the milling spindle via direct measuring system - Tool clamping system HSK-A63 - Leakage sensor to monitor coolant supply through spindle - Automatic right-side enclosure door for PICOMAX 95 - ProfiNet robot interface to PICOMAX as per Fehlmann interface description for customer-specific robot integration - Coolant system 700 l, BF/HD80, with through-spindle cooling, 80 bar, and chip conveyor - Emulsion and oil mist extractor system for work area; programmable operation via M function: on, off, intermittent - 3D probing system Blum TC52LF incl. spindle adapter HSK-A63 - LaserControl Blum LC50-DIGILOG for tool measurement and monitoring D 0.02 – 120 mm - Reference tool HSK-A63, Ø 8 mm - FEHLMANN 5-axis cycle package Automatic Indexing & Swivel Unit ATS 200 D - with Schunk TANDEM center vise KSP100 Automation – Unirobot pro Unirobot M-20iA-10P pro Robot: Fanuc 6-axis industrial robot - Manipulator: FANUC M-20iA - Max. payload: 20 kg - Teach pendant Safety fence system uniprotect Drawer system incl. workpiece carrier ALB - 10 pneumatic drawers with workpiece carriers (400 x 600 mm) FMB quick-change head Workpiece detection via light barrier Profinet interface Robot cell incl. program creation - Double gripper system Gripper modules: SCHUNK JGP 100-1 Max. workpiece weight: 3.3 kg All information subject to change. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2004, operating hours: 22,146 h, functionality: fully functional, machine/vehicle number: 107.44.00.035, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 300 mm, workpiece width (max.): 140 mm, total height: 2,900 mm, total length: 3,500 mm, total width: 2,400 mm, table load: 500 kg, rotary table diameter: 600 mm, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 4,192 h, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Here is a CNC vertical 5-axis machining center from the manufacturer Mikron for sale. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 800 Duro Dcsdpfx Aqe Afy Ilsvop Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical data: Travel distances X-Y-Z: 800x650x500 mm Max. rapid traverse rate: 30 m/min Max. feed force X- and Y-axis: 7000 N Max. feed force Z-axis: 9000 N Rotary table C-axis: 360° Rotational speed: 20 rpm at 30% duty cycle, 8 rpm at 100% duty cycle Swivel range A-axis: -30° to +120° Swivel speed: 15 rpm at 30% duty cycle Table area: 600x600 mm Max. table load: 500 kg Magazine capacity: 30 positions, fixed Tool holder: HSK-63 Max. tool length: 300 mm without taper Max. tool weight: 8 kg Tool diameter: 90 mm fully loaded / 140 mm partially loaded Spindle speed: 20,000 rpm Power: 16 kW at 44% duty cycle, 12 kW at 100% duty cycle New spindle installed in 2021. Since then, 4,192 spindle hours. Operating hours (program runtime): 22,146 h Machine dimensions: 3500x2400x2900 mm Weight: 9,900 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Renishaw measuring probe OMP60

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,202 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DMG MORI CMX 800V was manufactured in 2020. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a robust table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 800V vertical machining centre we have for sale. Contact us for further details. Djdpoz Hb Taefx Aqvscp • Spindle: • Max torque: 83 / 57 Nm • Working range: • Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min • Hours (approx.): • Operating: 12,138 h • Machining: 3,202 h

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table load: 300 kg, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 5, This 5-axis HERMLE C 800 U was manufactured in 1997. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a NC swivelling rotary table measuring 540 x 540 mm and has a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE C 800 U vertical machining centre we have for sale. Contact us for further details. - Machine has Damage on an axis- Clamping Surface / Table: NC swivelling rotary table 540 x 540 mm (interference contour diameter: 630 mm)- Swivel Range: +20° towards machine / -90° away from machine- Rapid Traverse (X / Y / Z): 35 m/min- Feed Range (X / Y / Z): 1 - 2000 mm/min manual / 30,000 mm/min programmed- Feed Force (X, Y, Z at 80% ED): 8,000 N- Tool Taper: SK 40 (similar to DIN 2079) / HSK compatible- Tool Magazine Capacity: 30 tool pockets (Pick-Up changer / ring magazine)- Operating Voltage: 460 V / 3~ / 60 Hz- Control Voltage: 24 V DC / 220 V AC- Total Nominal Current: 63 A- Total Power Rating: 43 kVA (equipped with IKZ / options)- Machine Dimensions (L x W x H): 2.70 x 2.21 x 2.93 m (base standard) / Height max. 3.00 m- Footprint Required (L x W): 4.50 x 3.50 m- Coolant Tank Capacity: 300 Liters- Sound Emission: 78 dB (A)- Equipped Options: Oil mist extraction unit, Chip conveyor, Internal coolant supply (IKZ) preparation/unit Dcodpfe Ahybfex Aqvjp Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Djdpfx Aqjxgqwdevjcp Table Size 600 x 400 mm Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: excellent (used), Year of construction: 2017, POSmill C 800 Compact – CNC machining center – Year of manufacture 2017 – Heidenhain TNC 620 Technical data: - Manufacturer: POSmill - Model: C 800 Compact - Year of manufacture: 2017 - Control system: Heidenhain TNC 620 - Travel in X: 800 mm - Travel in Y: 520 mm - Travel in Z: 550 mm - Table size: 950 × 520 mm Dcjdjz Ny H Eopfx Aqvep - Spindle speed: max. 10,000 rpm - Tool holder: SK 40 - Tool changer: 24-position (subject to confirmation) - Machine weight: approx. 6,800 kg - Rated power: 25 kVA Operating hours: - Control system on: approx. 35,524 hours - Machine on: approx. 29,264 hours - Program run: approx. 14,359 hours - Spindle S1: approx. 11,651 hours Further information and viewings by appointment.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 600 mm, table load: 1,200 kg, overall weight: 15,600 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 24, number of axes: 5, Vertical machining centre manufactured in 2005. This Fidia G996 RT features a robust CNC control system and a maximum spindle speed of 24,000 rpm. It includes a rotary-tilting table with a diameter of 800 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Fidia G996 RT machine we have for sale. Contact us for further details. • CNC control: FIDIA C20 XPowerMovement • Rapid traverse (X/Y/Z): 45 m/min • Positioning accuracy (X/Y/Z): ±0.003 mm (manufacturer’s spec) • Maximum acceleration: 10 m/s²Main electrospindle (reported configuration) • Max spindle torque (S6): 105 Nm • Tool holder: HSK-A63Rotary-tilting table (RT P-1000 – manufacturer’s specifications) • Table type: Rotary-tilting trunnion table • Table diameter: 800 mm • Maximum rotating diameter: 1,000 mm Dcedj Agm Ryopfx Aqvjp • A-axis travel: ±125° • A-axis speed: 75 rpm • C-axis travel: Continuous rotation • C-axis speed: 100 rpmTool changer • Type: Automatic tool changer • Tool magazine capacity: 24 positions

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, Brand: RMT Model: SIMPLE 8 Category: Vertical machining center Year of manufacture: 2008 CNC control: FANUC Series 0i-MC Machine weight: 7,500 kg Machine dimensions Length: 4,000 mm Width: 3,700 mm Height: 3,200 mm Spindle Spindle mounting: ISO 40 Maximum speed: 8,000 rpm Motor power: 9 kW Working travels X-axis: 900 mm Y-axis: 650 mm Z-axis: 620 mm Spindle nose–table distance: 150–800 mm Work table Dsdpjz Szgxofx Aqvjcp Dimensions: 1,000 × 625 mm Maximum load capacity: 750 kg T-slot tolerance: H7 Rapid traverses X/Y axes: 28,000 mm/min Z-axis: 28,000 mm/min Tool changer Taper type: DIN 69871/A40 Magazine capacity: 24 tools Maximum tool diameter: 118 mm Maximum tool length: 300 mm Maximum tool weight: 9 kg Equipment and accessories Chip conveyor Coolant collection tank with washing pump High-pressure pump for coolant through the spindle, with separate tank Spindle line cooler Various tool holders Manuals and electrical diagrams

Condition: good (used), Year of construction: 1999, Universal machining center Machine type: Hermle U 630 S Control: Heidenhain TNC 410 Year: 1999 SPECIFICATIONS Spindle speeds: 20 - 7.000 rpm Spindle power: 7,5 kW milling head: 0 - 90° Travel X-Axis: 875 mm Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 15 m/min. Feed: (X/Y/Z): 15 m/min. Equipment Tool: SK 40 quill range: 75 mm Table size: 900 x 528 mm Power consumption: 14 KW Machine weight: 4.500 kg Req. space (LxBxH): 2,3 x 2,0 x 2,1 m Dcsdpfxjz Dkrmj Aqvep

Condition: good (used), Year of construction: 2004, operating hours: 35,251 h, functionality: fully functional, overall weight: 8,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 11,082 h, number of slots in tool magazine: 28, Equipment: chip conveyor, documentation/manual, This HERMLE U1130 universal machining center was manufactured in Germany in 2004 and has been in operation for 35,577 hours, of which only 8,087 are spindle hours. Equipped with a Heidenhain TNC 520 control, this machine features the integration of 5 axes and an NC rotary table. It offers excellent operating conditions. Dodpfxoz Inknj Aqvocp Additional information: Machine advantages: Qualitative machine advantages: Very good condition Spindle operating hours: 11,082 Technical machine advantages: Internal cooling at 40 bar Integrated NC rotary table Blum laser measurement system Without the vises shown in the pictures.

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20,3/14,5 (40/100%ED) Cooling Cooling through the Spindle Center bar: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Dcedpfx Aqoznniasvop Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Spindle Working: ----- Rated power kVA: 19 Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 95 Monoblock was manufactured in 2016. It features a tool capacity of 60 tools and is equipped with a Heidenhain TNC640 control unit. The machine includes an internal coolant supply of 40 bar and a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 Monoblock vertical machining centre we have for sale. Contact us for further details. - Internal Coolant Supply (IKZ): 40 bar- Tool Measurement: Blum laser tool measurement- Including: Quickset- Optional / Additional Equipment: FCS clamping system (with components), HSK63 shrink-fit chucks, additional spare drives, spindles, and gearboxes- Operational Status: Fully functional, currently still in full operation- Machine Condition: Good; air/sight glass on the front is defective; runs very smoothly and with high accuracy- Previous Application Profile: 85% Steel (80% 1.1730, 15% higher-alloy steels, 5% hardened steel up to 60 HRC), 14% Aluminium, 1% Ureol and plastics- On Hours 35.000- Spindle Hours (Spindle): 23,000 hours (spindle replaced/repaired after damage in June 2021) - Machining Tolerance: 0.01 mm (standard milling), 0.02 mm (tilted milling)- Operations Supported: Roughing and FinishingThe displayed image of the machine is AI generated. Dsdpfx Aqez S E Eljvscp Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 with smarT.NC, total height: 2,800 mm, total width: 2,250 mm, table width: 920 mm, table length: 900 mm, table load: 1,800 kg, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 40,000 W, number of axes: 3, This 3-axis Alzmetall GS 800/3 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN iTNC 530 control and a robust table surface area of 920 x 900 mm, supporting a maximum table load of 1,800 kg. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 800/3 machine we have for sale. Contact us for further details. Dcjdpoz R Sz Eefx Aqvjp - Distance Spindle to Rigid Table: 150 – 650 mm - Table T-Slots: 9 T-slots according to DIN 650 in X-direction, 14 H12 width, 100 mm pitch, 14 H7 center alignment slot, table lowered by 80 mm - Spindle Type: Water-cooled high-frequency motor spindle with hybrid spindle bearings and oil-air lubrication - Spindle Taper: HSK-A63 according to DIN 69893 -- Max. Torque: 139 Nm at 25% duty cycle - Spindle Features: New spindle in 2025, thermal expansion compensation, sealing air seal, air blow through spindle center - Rapid Traverse (X/Y/Z): 45 m/min - Max. Acceleration (X/Y/Z): 10 m/s² - Max. Feed Force (X/Y/Z): 10 kN at 40% duty cycle - Measuring Systems: Dual direct linear measuring systems for X/Y, direct linear measuring system for Z - Positioning Accuracy (Tp): 0.007 mm according to DIN ISO 230-2 - Tool Magazine: Chain magazine with 33 tool positions - Tool Change System: Pick-up system - Max. Tool Diameter: 90 mm (full configuration) / 130 mm (with free adjacent positions) - Max. Tool Length: 300 mm - Max. Tool Weight: 10 kg - Max. Total Tool Weight: 160 kg - Tool Change Time: Approx. 2 seconds - Chip-to-Chip Time: Approx. 6 seconds - Operating Voltage: 3x 400 V - Mains Frequency: 50 Hz - Total Rated Current: 55 A - Mains Supply Fuses: 63 A gG - Required Supply Pressure: Min. 6 bar - Required Network System: TN network - Transport Dimensions: Approx. 2,250 mm (W) x 4,760 mm (D) x 2,800 mm (H) - Additional Equipment & Features: - HEIDENHAIN TS 640 3D touch probe with infrared transmission - HEIDENHAIN TT 140 automatic tool measurement - HR 410 electronic handwheel - Automatic roller shutter roof cover - Scraping-belt chip conveyor (for short metal chips up to 80 mm length) - All-round sheet steel enclosure - Stainless steel interior lining of the machining area - Work area lighting - Electrically secured horizontal sliding door with mechanical locking - Control cabinet cooling- Missing/Excluded Components: Coolant tank is NOT included (no coolant tank, no pumps, no chip flushing hose)

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Dsdpfx Ao Adl Rkeqvocp Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 860 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530 i, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 860 was manufactured in 2014. It features an internal coolant supply and is equipped with a Heidenhain TNC 530 i control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 860 vertical machining centre we have for sale. Contact us for further details. Dodpfxozbu Iwj Aqvjcp • With internal coolant supply • Condition: Very good / Fully operational • Control System: Heidenhain TNC 530 i Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 1998, operating hours: 74,617 h, functionality: fully functional, controller manufacturer: Fanuc, controller model: Fanuc i0, Dah Li MCV 720, fully functional. One owner only. Dcodpfx Asykk Apjqvsp

Condition: used, Year of construction: 1994, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 5,600 kg, spindle speed (max.): 8,000 rpm, Fanuc rotary table, Nikken Dsdpfx Aj Abgfkoqvscp BT40-8000 rpm spindle Tool changer Tool changer arm, requires repair Travel: 800 x 400 x 400 mm

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, overall weight: 7,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 3, This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details. - Power (40% / 100% Duty Cycle): 15 kW / 10 kW- Rapid Traverse (X, Y, Z): 35 m/min- Coolant System: 300 L – 40 L/min at 3 bar- Operation Voltage: 400 V / 3~ 50 Hz- Control Voltage: 24 V-- Total Nominal Current: 44 A- Total Rating: 31 kVA- Electrical Drawing No.: 300.91 K 40.1- Control Unit Operating Hours: 57,705 hrs- Machine Operating Hours: 48,735 hrs- Program Run Time: 19,077 hrs- Spindle Operating Hours: 18,005 hrs- Drive On: 30,073 hrs- Axes in Motion: 17,617 hrs- Included Equipment / Accessories:- Heidenhain TS 642 touch probe system (retrofitted in 2023)- 3 Allmatic vises- Approx. 300 tool holders- 3 jaw chucks- Miscellaneous small parts- Complete machine documentation and service reports- Service History:- 2019: New main spindle fitted- 2023: Retrofitted with Heidenhain TS 642 touch probe system Technical Specification Taper Size SK 40 Dcedpjz D Tdxefx Aqvep