Used Hundegger P 10 for sale (28)

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1301, I am offering for sale a Hundegger P-10 woodworking machine, designed for processing roof beams. The machine is fully operational and still in use; demonstration under power is possible. Maximum cross-sections: 260 x 400 mm. Year of manufacture: 1994. Isdpfow I Emkox Aa Eeik Included with the machine: - Under-table cross-cut saw - 2 marking pencils - 3 large milling cutters - 1 finger joint cutter - 2 drill bits + nail drill - 4 chain mortisers Service carried out on 10/6/2025. A large number of spare parts are included. Please do not hesitate to contact me for more information.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1232, total length: 23,000 mm, total width: 7,200 mm, total height: 2,550 mm, workpiece height (max.): 260 mm, type of input current: AC, space requirement width: 7,200 mm, space requirement length: 23,000 mm, space requirement height: 2,550 mm, workpiece width (max.): 400 mm, table width: 400 mm, air pressure: 8 bar, overall weight: 14,000 kg, Sales Description: Hundegger ABM-B P10 Joinery Line + HMC Planing Machine Manufacturer: Hundegger Model: ABM-B P10 incl. HMC Year of manufacture: 1994 Condition: Used, fully operational Location: Germany Technical Specifications: Processing range: Up to 260 x 400 mm Saw unit: With block separator and open base Milling units: Notch milling unit with right/left milling head Half-lap milling unit with right/left milling head Finger milling unit Vertical milling unit (ø 300 x 100 mm) Drilling units: Vertical drilling device Horizontal drilling device Rafter nail drill Chain mortiser: Vertical top/bottom with automatic chain lubrication Horizontal with combination unit Additional equipment: Marking device at the stop Positioning chain feed Horizontal cross conveyor (2.2 m) Transfer cross conveyor (2.9 m) Ejector with storage supports Scraper control Planing Machine HMC (included): Year: 1994 4 feed motors 4 planing motors (7.5 kW) 4 bevelling motors Automatic centering unit Special Features: Fully automatic processing of single and series parts Control: PC-based with carpenter-friendly graphical interface + USB stick as floppy drive (BV transfer) Machine inspection under power possible Notes: All documentation available Iiodjxrbizspfx Aa Ejk Self-collection only, ex works, without overhaul No warranty or guarantee Subject to prior sale

Condition: good (used), For sale is a fully automatic, computer-controlled woodworking machine for carpentry elements by HUNDEGGER. This is a patented system, recognized as unrivaled on the market, guaranteeing precision, flexibility, and cost-efficiency in both serial and individual production. Planing dimensions 30x30. Iijdjxvnk Hjpfx Aa Eek

Condition: used, Year of construction: 1995, functionality: fully functional, For sale: Hundegger P10 machine, in continuous use. The machine was purchased used, directly from the manufacturer in Germany. Ready for further operation. Possibility to inspect the machine live during operation. Iisdpfxoxlla Ds Aa Esk

Condition: good (used), Year of construction: 1994, functionality: fully functional, FOR SALE HUNDEGGER P10 Iiodpfx Ajwhn A Noa Esk ROOF STRUCTURE PROCESSING MACHINE. THE MACHINE IS IN GOOD CONDITION, IT WORKED UNTIL IT WAS DISASSEMBLED AND DRIVEN TO THE LOCATION WHERE IT IS WAITING FOR A NEW OWNER. IT WAS TAKEN OUT DUE TO THE ARRIVAL OF TWO NEW MACHINES FROM THE SAME MANUFACTURER. THERE ARE MANY NEW SPARE PARTS THAT ARE NOT INSTALLED. THE PRICE IS NOT FIXED AND CAN BE NEGOTIATED UPON ARRIVAL AT THE LOCATION DURING THE INSPECTION OF THE MACHINE

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Infeed length: 8270 mm / Max. timber length, infeed: 16000 mm / Max. timber length, outfeed: 12000 mm / Infeed cross conveyor, 5-strand, 2200 mm / Extendable timber support table / AQF strand with shaft extension, 2900 mm / Under-table pivoting crosscut saw /Straight safety guard flap / Waste disposal downwards / Control for waste disposal system / Universal milling unit, 5-axis with profile cutter / Dovetail cutter / Finger joint cutter / Combination support for vertically operating tools / Drilling unit, 3.0 kW / Finger cutter 1 / Combination support for horizontally operating tools / Slotting unit, 480 mm / Drilling unit 1, 2.2 kW / Drilling unit 2, 2.2 kW / Marking device, reference side / Marking device, operator side / Pneumatic beam turning station / 7-arm outfeed table/ Extension roller conveyor, 5300 mm Ijdex D Ibhopfx Aa Eeik This HUNDEGGER K2-5-450 was manufactured in 2005. A robust timber framing machine, it excels in cutting, milling, drilling, and slotting for timber construction. Features include an 8.27m infeed length, extendable timber support, and multiple drilling units. Ideal for precise wooden component processing. Contact us for more information about this machine. Application Types Milling (Wood)

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1779, The K1 was rebuilt in 2020 and equipped with the latest safety features. It is now dismantled and can be loaded immediately. Iijdpfox Ehmasx Aa Eok

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, K2 UF5 with HMD planer in front of the K2 To be dismantled by the buyer. Hundegger is available, if needed, to assist with dismantling either at the beginning of January or at the end of February. Machine delivered in JULY 2003. - 5-axis saw. - 5-axis universal milling unit. - Spare slot. - Vertical combination: 2 drilling spindles, 1 router. - Horizontal combination: 1 tilting drill, 1 drill, 1 mortiser. - Hydraulic turner. - 4-sided planer with reinforced 9.2kW motors. Ijdpfxex Dzu Ij Aa Esik Sold with extraction system to dismantle and scraper system in the pit.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is an SC3-200 fully automatic joinery and cutting system for professional timber construction. The machine offers high precision, reliable automation, and is ideally suited for operations with larger production volumes. Features • Angle and tilt drive for the saw unit • Automatic infeed system Iiodpox Hi Spjfx Aa Eok • Infeed cross conveyor with 5 strands, suitable for timber up to approx. 13 m • Component support for small cross-sections • 6-arm outfeed table and lowerable outfeed table • Additional AQF strand for long timber • Vertical drilling unit • 7.5 kW revolver milling unit • 2.2 kW horizontal drilling unit • Combination support for vertically and horizontally operating tools • Inkjet 4 marking system • Outfeed stand with pusher The plant will be available from mid-February. Inspection possible by appointment.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 520 mm, Equipment: safety light barrier, TECHNICAL DETAILS Iiodpfox I A A Dex Aa Ejk Working width: 520 mm EQUIPMENT Safety light curtain

Year of construction: 1993, condition: good (used), Hundegger planer Year of manufacture 1993 4 sides planer and chamfering machine Iodpfsl Hw Ehox Aa Eeik

Year of construction: 2003, condition: ready for operation (used), General Data Measurements width 2510 mm Measurements depth 1680 mm Measurements height 2180 mm Machine weight 8000kg aprox Iiedpfx Aasx D R Nue Eek Additional Equipment 6-armed offload table PC + Monitor Electrical connection: 3x 63A, max. 15kW Pneumatic connection 1/2", 9 bar at least 400l/min Main supply line for pneumatics min. 3/4" This 4-axis HUNDEGGER Speed-Cut SC1, manufactured in 2003, is a universal machine center that offers advanced wood processing capabilities. It features computerized cutting, drilling, and milling with a maximum cutting height of 160 mm and width of 450 mm. The machine is equipped with a programmable controller for saw blade adjustments and a pneumatic clamping system, ensuring efficient material handling. The robust 4-axis CNC control enhances precision in operations. For more information about this machine center, please reach out to us. Application Types CNC Wood Machining

Condition: used, Year of construction: 2006, functionality: fully functional, Hundegger K2 450 Joinery Machine (UF5) with good equipment, well-maintained and reliable. For sale is a Hundegger K2 joinery machine in good, regularly serviced condition. The machine comes from a well-kept operational environment and has always been properly maintained and cleaned. Manufacturer: Hundegger Model: K2-450 (UF5) Year of manufacture: 2006 Equipment: - Machine length: 11.76 m - Infeed: 8.51 m - Max. timber length infeed: 14.5 m - Max. timber length outfeed: 13.0 m - Colour: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m with flat bar chain Iodpfx Asx Azrkoa Esik - Infeed strand with shaft extension 2.2 m - Extendable timber outfeed - Under-table swiveling cross-cut saw - Alternative disposal via bin - Control for disposal device - Universal 5-axis milling unit UF5 - Roller cutter - Finger jointing cutter - Dovetail cutter - Combination support for vertically working tools - Drilling unit 2.2 kW - Drilling unit 3.0 kW - Finger jointing cutter - Combination support for horizontally working tools - Drilling unit 2.2 kW - Swiveling drilling unit - Slotting unit, 900 mm, double-sided guide - Longitudinal and cross-groove milling unit - Marking and labeling device integrated in table - Hydraulic beam turning station - Roller conveyor with pusher, 5.30 m - Network connection Available from: Autumn 2026 Location: Austria Price: on request All information subject to change; prior sale reserved. Sale ex location. No warranty or guarantee. Inspection and test run available by arrangement. If interested, just get in touch – we are happy to answer any further questions.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11174, For sale: our used Hundegger fully automatic joinery machine, model K2, year of manufacture 2001 - Infeed and loading cross conveyor (6-strand) - Underslung pivoting crosscut saw - Universal milling unit (UF4) - Combination support for vertically operating tools - Drilling unit 2.2 kW - vertical - Drilling unit 3 kW - vertical - Vertical finger-joint cutter 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW Iedpexvychsfx Aa Esik - Drilling unit 2.2 kW - horizontally swiveling - Slotting unit - Rear marking unit - Underside marking and labeling device - Fully automatic beam-turning station - Dovetail cutter - Transport and positioning device "two-hand system" - Electronic control - 5.30 m roller conveyor extension - 6-arm output table - Height-adjustable safety stop plate - AWF extension + timber feeder 13 m - Tooling included - Further details and accessories as shown in photos and available on request. The machine is fully operational and can be inspected by appointment. Available from Spring 2026. All documentation is present, regularly serviced by Hundegger, sold without refurbishment. Dismantling and collection by the buyer. The sale is made as a used machine with the exclusion of any warranty or guarantee.

Condition: used, Year of construction: 2012, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: RD 22, feed length Y-axis: 15,000 mm, workpiece weight (max.): 15,000 kg, cutting height (max.): 300 mm, power of the milling unit: 12,000 W, saw blade diameter: 800 mm, working width: 625 mm, Equipment: safety light barrier, HUNDEGGER ROBOT DRIVE Year 2012 Section 40x60 to 650x300 Infeed length 15 m, outfeed with door Regular maintenance Centralized lubrication Tool package Dismantling not included Loading assistance included Isdpfx Aext Ndcea Eeik

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11441, At the moment we are working with the following version: 9.23.12.102733-12 Isdswvih Ajpfx Aa Esik The equipment of the K2: a 4-axis universal milling machine 2 drilling rigs a finger cutter below a slotter Hydraulic beam turning station Machine is fully working, can be visiited upon agreed time. avaible from 30/11/2025 Disassembly from our company and loading to truck, and is included in the price. Sale is as a used machine with exclusion of any warranty.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 12762, cutting height (max.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Infeed and loading cross conveyor Under-table pivot cross-cut saw 11 kW 5-axis universal milling unit – UF5 Iodpfxjxxa Dws Aa Eoik Combination support for vertically operating tools Drilling unit 2.2 kW – vertical drilling direction Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) horizontal drilling direction Slotting unit 7.5 kW Rear marking device (on the stop side) Fully automatic beam turning station, hydraulic Transport and positioning device "two-hand system" Electronic control with Hundegger production software Roller conveyor for wood outfeed with ejector 5-arm timber rack Safety devices and guards Refined machine surface Extension for infeed cross conveyor Infeed roller conveyor for timber length 13 m 5-axis universal milling unit – UF5 Revolver milling unit – vertical from above Remote maintenance possible Control cabinet special arrangement Control unit for extraction with operating buttons Extension roller conveyor 7.10 m without drive Raising and lowering safety baffle plate

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, For sale: Hundegger K2i joinery centre from 2008. The machine is in excellent condition and very well equipped, including: 13 m infeed table Beam clamps with chain drive! 5-axis saw unit 5-axis milling unit Horizontal and vertical drilling Additional milling unit for rafter ends from below Slotting unit with complete set of 8 and 10 mm chains Note! The slotting unit is rare equipment, used for the production of trusses with hidden steel plates – a very useful feature. Installation of the machine is possible; we already have experience in setup and commissioning. Iiodpfx Aasxx T Rdj Esk In addition, we can offer implementation (software, training + assembly). The machine is in very good technical condition, regularly serviced, and in constant operation. We are selling because we purchased a much newer model. Attention: Availability for collection – March!

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1691, total length: 13,500 mm, saw blade diameter: 760 mm, type of input current: three-phase, working height: 300 mm, overall weight: 12,500 kg, working width: 450 mm, cutting height (max.): 300 mm, cutting width (max.): 450 mm, input voltage: 380 V, FOR SALE: CNC MACHINE HUNDEGGER K1-A I am selling a well-maintained and reliable Hundegger K1-A CNC machine, year 1997. The machine has been regularly serviced and received a complete upgrade in 2015 directly by Hundegger (new software and new electronic components). 🔧 Machine Condition - Still in daily operation - Test run / demonstration available - Properly maintained and in excellent technical condition ⚙️ Equipment & Tooling - 5-axis saw unit - 4-axis universal milling unit - 2 vertical drilling units - 1 milling unit - 2 horizontal drilling units - Horizontal notching unit - 3-sided marking / drawing unit Iiedpsxyhmpefx Aa Eok 📦 Upgrades (Hundegger, 2015) - New official Hundegger software - New electronic components - Improved accuracy, reliability, and performance

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPM2 - 2600 - 2600 Can be inspected during operation. Training possible on request - Automatic panel infeed - Lifting table 2600 x 6000 Aggregates - SPM-FF6-23U Finger router 6 Kw max. 23170 rpm - SPM-KSK3 4-axis circular saw unit 3 kW saw blade 220mm - SPM-5F 5-axis milling unit 6.0 kW (special motor 24,000 rpm - 5-axis unit) - SPM-IJ Ink marking system - InkJet HP system Component delivery - SPM-SHP-6000 Special lifting table Panel removal 2600 x 6000 - Access guarding of discharge area Iedpfxou H Uqco Aa Eoik

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Iisdpfxoxftale Aa Ejk Videos show the machine in operation.

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill Iedpfxextxkxe Aa Eeik combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Iiedpfx Aewuppwea Ejk Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: used, Year of construction: 2002, functionality: fully functional, cutting width (max.): 625 mm, Hundegger joinery system with mechanization 5 axes Working width: 625 mm Iijdpfx Aasv Ubtcs Eek with tools

Condition: ready for operation (used), Year of construction: 1991, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000000001, Approx. 18m long Already dismantled Ijdpovrv Trefx Aa Eoik Local charging possible Fully functional