Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Working dimensions: Bws Ievpubpoa U Enlel X-axis approx. 3,050 mm Y-axis approx. 1,200 mm Workpiece thickness max. 60 mm when using the gluing unit Console clamping table with: 6 workpiece support supports with hoseless 2-circuit. Clamping system 1 workpiece stop per support in the X direction 1 workpiece stop each on the left and right, movable 2 workpiece stops on the back of the table for large workpieces Table designed for 2-compartment occupancy when using the gluing unit, for pendulum machining when drilling and milling 4 plug connections for connecting pneumatic clamping elements Machine zero point front left 4 pcs. Lifting rails, facilitate the positioning of heavy workpieces LED setup aid for clamping table, facilitates the positioning of the consoles and the vacuum suction device Main spindle 11 KW, vector-controlled HSK F63 mount Speed max. 18,000 rpm Spindle retraction stroke, enables the use of the drilling head with exchanged profile milling unit Tool length including tool holder up to max. 150 mm C-axis with unit interface with pneumatic interface Unlimited swivel range 12-way disc changer Drilling unit with: 11 vertical spindles in X direction 7 vertical spindles in Y direction Horizontal drilling / grooving saws in crosshead design, swiveling 0/90 degrees Replaceable gluing part, housed on the right side of the machine stand POWERCONTROL PC85 control system with the following HOMAG software: + WOODWOP with technology database + WOODSCOUT Adapter units: + Saw-drill unit, manually pivotable + Lock case milling unit, 2 outputs + Drilling/milling unit, 4 spindles + Combination unit, radius milling/scraping blade

Condition: used, Year of construction: 2017, Working dimension X: 5.400 mm Working dimension Y: 1.900 mm Working dimension Z: 350 mm Independent Z-axes: 2 Number of milling spindles: 1 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 24 Disc tool changer: Yes Pickup change place: Yes Vertical drilling spindles: 22 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Bwo Ia Uswfrbdj Enlel Stop for top layer protrusion: Yes Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 8 Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 200 m³/h Special workpiece clamping system: Clamps for beams Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Remote control: Yes Control: PC control Software: MASTERWOOD MASTER 3D, MASTERWOOD MASTERWORK, MASTERWOOD MASTER AT Conformity marking: CE mark Total connection: 54 kW Weight: 6.500 kg Space requirement Length: 9,03 m Space requirement Width: 5,55 m Space requirement Height: 3,16 m

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg Price: On request - Main motor power [kW]: 9.5 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Working range Z [mm]: 1810 - Number of milling spindles [pcs]: 1 - Year: 2013 - Documentation available: Yes - CE mark available: Yes - Serial number: AA1/017355 - Voltage [V]: 400 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Bs Ia U Enewcbr Hjljwl VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2022, +++ Special price for an exhibition machine in Garbsen +++ Includes 3 days of preliminary software training in Nürtingen. Includes 4 days of commissioning/instruction, plus freight costs. +++ Subject to prior sale +++ morbidelli m90 Drilling and milling Made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Extremely powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with over 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to equip the machine according to individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate, the work table is accessible at all times thanks to the lowered machine frame. The electrical cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protection is required. The supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The extra-wide support was specifically designed to give the machine stability and ensure constant precision in all working conditions. The machine does not require anchoring to the floor. The base forms a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that withstands the greatest stresses and thus ensures superior performance and greater precision. The mobile gantry consists of a solid single piece anchored to the base and slides along prismatic guides with top-quality ball return slides. The work unit is attached to it and moves along Y and Z axes, also on prismatic guides with ball return slides. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to power transmission via a rack and pinion with helical teeth. This creates a greater tooth-to-tooth thrust, resulting in greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on the mechanical components and quieter operation. The vertical Z-axis is driven by a ball-return screw, which ensures perfect balance under dynamic loading and withstands sudden accelerations and decelerations. The main milling unit is directly coupled to the Z-axis carriage, ensuring very high-quality finishing due to the complete absence of vibration. Movement along the X-Y-Z axes is achieved by brushless motors powered by static inverters. These ensure: - Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of set-up activities when switching on the machine thanks to absolute encoders- Elimination of general maintenance activities because Bwj Ia Uev U Ez Ds Enlsl

Condition: ready for operation (used), Year of construction: 1999, Functionality: limited functionality, machine/vehicle number: 2092, travel distance X-axis: 36,000 mm, travel distance Y-axis: 5,800 mm, travel distance Z-axis: 1,250 mm, feed length X-axis: 36,000 mm, feed length Y-axis: 5,800 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, controller model: NUM 1060 W, workpiece length (max.): 34,000 mm, workpiece width (max.): 4,500 mm, workpiece height (max.): 240 mm, workpiece weight (max.): 25,000 kg, total height: 4,825 mm, total length: 43,700 mm, total width: 11,855 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 33,000 W, spindle nose: HSK 100F, number of spindles: 1, number of slots in tool magazine: 18, tool length: 400 mm, tool diameter: 750 mm, tool weight: 20,000 g, Equipment: rotational speed infinitely variable, CNC large joinery portal (manufacturer CMS, type "NC-PMC36-TUCU", year of manufacture 1999) for the processing of large-format solid wood components (glulam and CLT) for sale. The joinery gantry can be used for simultaneous 5-axis processing of large-format timber components up to 34.0 m long and 4.5 m wide. Among other things, this system was used to process the roof girders for the Expo roof in Hanover. The system consists of a massive movable bridge that is moved via guide rails at a maximum speed of 50 m/minute. The processing spindle is mounted on a carriage that enables movement in the Y and Z directions. A fourth axis allows the unit to rotate on the vertical axis, while the fifth axis allows the spindle to be tilted in the vertical plane. Bwj Ijvitzzoa U Enlsl Today, the components are positioned on wooden beams in a fixed grid. The components can be machined on three sides using the appropriate sliding wooden blocks. Components with too little weight are fixed with screws during processing. Positioning is carried out using a laser system, which is not included in the scope of delivery. However, new laser systems can be implemented relatively easily. The system is currently controlled via a CAM system from Siemens. The CAM software is not included in the scope of delivery. However, all standard CAM systems can be used by adapting the post-processor. The vacuum system for fixing the components described in the enclosed order confirmation is not included in the scope of delivery. The system is extremely robust and solid and has provided good service for over 25 years. It can be inspected during operation. The guide rails, the bridge, the spindle and the entire mechanical design cannot be more robust and solid, even in new, comparable systems. However, it is recommended that the system be completely overhauled by means of a retrofit in order to comply with current safety regulations. Appropriate specialist companies can be named. The machine is to be handed over in April 2025 and dismantling should ideally be carried out by the buyer. However, only a limited time window is available for this.

Condition: used, Year of construction: 2011, BIESSE SKILL 1536 G FT Numerically controlled machining centre Description; Working fields: X = 3765 mm; Y = 1585 mm; Manual lubrication system 2 back stops equipped with pneumatic system + 1 left side stop3 front stops + 1 left side stop Vacuum system Electrospindle 13,2 kW (17,7 HP) ISO 30 Flange for the assembly of aggregates on an electrospindle Prearrangement for the assembly of a 360° operating unit (C Axis) 4 outlets air blowing unit Revolving tool changer with 12 places NON EC safety devices including 1 safety mat and low fence 1 7000201 Automatic lubrication system 1 7550008 Presetter for the measurement of the tool length with diameter up to 130mm 1 7022181 CE Safety devices according to Directive 2006/42/CE for base machine 1 7300969 250 m3/h rotary vanes vacuum pump 1 AC150307 Cable tray at rearside Be Isv Tb Scea U Enlowl 1 7250165 ISO 30 Aggregate for sawblade with maximum diameter: 215 mm 1 7530075 Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine 1 7530333 Biesse FoldingEntry-level software module for folding (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, Year of construction: 2025, General specification FANTOM 2136, is associated with milling, optimizing, drilling in 2D and 3D processes of panels such as wood, fiberboard, chipboard, doors, furniture parts, plastic, alucobond (type of composite), aluminum and acrylic materials. The machine can be converted into a fully automatic production line. Technical specification FANTOM 2136 Working range 2100 mm x 3660 mm Z-axis 250 mm X-axis speed 90 m/min Y-axis speed 90m/min E0dkmojey Hnocm E T Ssld Uw Roi Rok Z-axis speed 30 m/min Motor power 11 kW / 15 hp HSK F63 Hiteco Spindle speed 24000 rpm Bs Iaowc N Sbe U Enlswl Multi-drilling unit Control system Beckhoff PC based Cad Cam Software AlphaCam Lubrication system Automatic Tool cooling air cooling Tool change 16 pieces fixed magazine Standard Tool change Carousel: option Vacuum pump 250m3 Becker Vacuum area 9 automatic areas Power 25 kW Electricity 380V - 50Hz Weight 4040 kg Dimensions 3800mm X 5400mm.

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Basic machine - DYNESTIC 7532-10.5 Automatic Dynestic table For classic nesting processing with wear plate Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, aggregate head and consoles Traveling column in gantry design Rack and pinion drive, helical gears, in X and Y directions, Ball screw spindles in Z direction for precise positioning Technical data: Processing dimensions: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances X = 4695 mm Y = 2100mm Z = 293 mm Max. drive-over height DYNESTIC table Z = 100 mm from top edge of table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table Fixed, continuous machining table with grid division, continuous grooves in X and Y direction, spacing of the grooves 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum field 1-circuit vacuum system Drilling unit 7877, 19 spindles Drive power 1.7 kW 13 vertical spindles can be called up individually Arrangement in U-shape 5+4 in X and 4 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from screw end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: clockwise / anti-clockwise in Change n(max.) 1000 - 4400 min-1 continuously adjustable Mounting: M 10 thread - 11 mm fit without tools, without mounting 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Mounting: M 10 thread, 11 mm fit Bj Ia U Eeu Druyonljwl Total drill length max. 63 mm from screw end without tools, without mounting Milling unit 7842, Power: 12.0 kW (S6) n(max.) = 1000 - 24000 min-1 continuously adjustable, max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand threaded nut (for right-hand rotating tools) with collet chuck with HSK shaft Ceramic ball bearing (hybrid bearing) Tool weight max. 6 kg (incl. holder) Tools: milling and grinding tools max. Ø 160 mm Safety paneling in accordance with CE standard Safety fence on the side and rear Vacuum pump 500 m³/h dry runner Personal safety through light barriers in the front area of the machine Handheld control unit for remote control of the machine with the following operating functions: > Start / stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed / rapid traverse for all axes > EMERGENCY STOP CAMPUS V7 CAD/CAM software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM properties for creating part variants with macro technology Automatic central lubrication Automatic lubrication according to defined lubrication intervals Additional sealing against dust through overpressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y and Z directions, for all ball screws in Y and Z directions for all milling spindle guides

Condition: good (used), Year of construction: 1997, Hundegger - K1 joinery system, built in 1997, with the following equipment: - Cross feed conveyor with flat belt chains - Under-table swivel cross-cut saw, blade diameter 800 mm - 4-axis universal milling machine with finger milling cutter and dovetail cutter Combination support for vertical tools: - Drilling rig - Vertical finger milling cutter Combination support for horizontal tools: - Drilling rig - Drilling rig - Slotting set - Rear marker - Automatic edger - Various milling heads - Spare saw blades €38,000 + VAT Condition: Used, no warranty or guarantee. Assistance with dismantling is available. Available upon request. For questions, please contact us for more photos! Bws Iswf R I Asa U Enlol

Condition: used, Year of construction: 2016, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis BIESSE Torque C-axis: Yes Tool clamping system: HSK-F63 Tool changer positions: 22 Disc tool changer: Yes Pickup tool changer: Yes Vertical drilling spindles: 10 BIESSE Drilling aggregate BH 10: Yes Gantry machine: einseitig angetrieben Machine table: Matrix table Pendulum machining: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Suitable for nesting: Yes Labelling: Yes, manually Safety device: Light barrier, Bumper Interface for .dxf data: Yes Bs Ia U Esv A Ainsnlewl Tool charge measurement: Yes Automatic lubrication: Yes Control cabinet cooling: Yes Remote control: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID Conformity marking: CE mark, EAC mark Total connection: 23 kW Weight: 3.600 kg

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Condition: well maintained Technical data: Processing length in X = 200 - 3200 mm Max. travel without re-clamping 1300 mm in Y = 70 - 920 mm Material thickness Z = 8 - 70 mm Equipment: Milling unit: 6.5 kW (S6-40), air-cooled with HSK-F 63 tool holder Drilling unit: 1.7 kW, 15 spindles Tool changer: 6-way magazine pick-up system, pneumatic 19" flat screen Campus software 1 machine license inc. Cabinet Control light ECO vacuum system, 1-circuit vacuum system 8m³/h Automatic central lubrication combined lubrication points for all linear guides in X, Y and Z directions Bs Ia Usulp Edj Enlewl Milling tools are not included Scope of delivery! Availability: short term Location: Röllbach

Condition: used, Year of construction: 2017, Working dimension X: 8.500 mm Working dimension Y: 2.600 mm Working dimension Z: 150 mm Number of milling spindles: 2 Main motor power: 15 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Disc tool changer 24-fold: Yes Pickup change place: Yes Vertical drilling spindles: 8 Bwe Iewfgzfea U Enljl Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pin system Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Outfeed: belt conveyor Safety device: Bumper Chip conveyor: Yes Control: SIEMENS SIMATIC HMI TOUCH, SIEMENS SINUMERIK PCU 50 Conformity marking: CE mark Space requirement Length: 14,5 m Space requirement Width: 9,4 m

Condition: new, Year of construction: 2021, CNC machining unit for milling Tool spindle position: 90° Machine connection: Holz Her with HSK 63 F Drilling: 3000 - 9000 rpm Spindle speed: max. 15,000 rpm Bwo Ia U Enjwb Ehislol Gear ratio i = 1:1.5 Rotation direction: left/right Torque: max. 20 Nm Tool holder: ER32/ER16 Spindle for omega cutters: ER16 Availability: Short-term Storage location: Hochheim

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Travel 2500 x 1300 x 180 mm in 19 mm Forescolour consisting of a milling table (X-axis), a portal (Y-axis), a Z-axis unit in compact panel and base frame, with adjustable machine feet, milling bed in 19 mm MDF as sacrificial panel Table openings pre-equipped lengthwise and crosswise Mechanics set consisting of profile guides incl. profile guide carriage, ball screw and precision racks. . All elements assembled, pre-lubricated incl. test run, ready for immediate operation. Machine feet, adjustable. High-performance grease for lubricating the guide carriages. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance output stages, power supply unit and toroidal transformer, completely pre-assembled in the control box, as well as sensors for each axis. Switching relay for automatic control of the existing extraction system Bj Isudqgrea U Enlswl Brush seals as dust protection. CE-compliant safety device with accompanying extraction unit and laser scanner mounted on one side for workspace monitoring, with 275° and 5.5 m field range (positioning of the machine in a corner of the room). Manual control unit equipped with all necessary functions for operating the machine, incl. emergency stop button and dead man's switch Tool length sensor for determining the tool length and changing the active zero offset High-frequency spindle with 2.2 KW, incl. union nut, frequency converter, mains filter, braking resistor and collet set. 21.5 inch monitor as built-in monitor, incl. mini PC with Windows 10, CAD software Rhino 7.0, G-code generator Estlcam V 11, Beamicon2 control software, as well as mouse and keyboard, pre-installed in an ergonomic desk. (RECOMMENDATION: Data should be transferred via USB stick, as otherwise automatic updates could disrupt operations). Incl. milling bed designed as a vacuum table, consisting of twelve adjustable sub-elements. Cross table made of PE with a cover plate made of MDF. Vacuum pump from Becker with a capacity of 160 m³/h, as oil rotor. (recommended use: processing of coated chipboard materials) 2 plugs with alternating current 16 A, 400 V are required for the power connection of the vacuum pump The customer must provide HDF 3 mm raw on both sides for the entire vacuum table (5000 x 2100 mm) as a sacrificial plate Incl. 10-piece cutting tool set: 2 pcs. 5 mm TAC double-edged cutters. 8 pcs. 4 mm solid carbide single flute cutters. (Tool selection can be customized as required) Availability: short term Storage location: Schweinfurt

Condition: used, Year of construction: 2005, Used machine Year of construction 2005 technical data: - Basic machine 555 - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968, 18 vert. Drilling spindles with 32 mm grid, individually retrievable, arranged in T-shape, 12 in X-axis and 6 in Y-axis, max. drilling diameter 35 mm (depending on panel thickness), spindle stroke: 70 mm, direction of rotation: right/left alternating, n= 4725 min-1 infinitely variable, 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Sawing unit 7946, 3.5 kW, 90° pneumatically tiltable, n = 5300 min-1, tool holder A Ø = 200mm, I Ø = 30mm, B = max. 3.5 mm, sawing/ grooving in X and Y direction Bwj Iaoq Tfqaj U Enlol - Milling unit 7935 with 16 kW spindle, water-cooled - Trimming unit 7982 for lock case trimming - Tool changer 7996, 18-position magazine (plate) - Vacuum pump with 140 m³/h - Manual control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short term Storage location: Poland

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Travel path 5000 x 2100 x 180 mm In 19 mm Forescolor finish, consisting of a milling table (X-axis), a gantry (Y-axis), a Z-axis unit made of compact board and a base frame, with adjustable machine feet, and a milling bed made of 19 mm MDF as a sacrificial board. Table openings pre-installed longitudinally and transversely. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for use. Adjustable machine feet. High-performance grease for lubricating the guide carriages. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control box, as well as sensors for each axis. Switching relay for automatic control of the existing extraction system. Brush seals for dust protection. CE-compliant safety equipment with a mobile extraction system and a single-sided laser scanner for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). Handheld control unit with all the necessary functions for operating the machine, including an emergency stop button and deadman's switch. Tool length sensor for determining the tool length and changing the active zero offset. High-frequency spindle with 2.2 kW, including union nut, frequency converter, line filter, braking resistor, and collet set. 21.5-inch monitor as a built-in monitor, including a mini PC with Windows 10, Rhino 7.0 CAD software, Estlcam V 11 G-code generator, Bo Iswb Eh Aja U Enljwl Beaicon2 control software, and a mouse and keyboard, pre-installed in an ergonomic console. (RECOMMENDATION: Data transfer should be done via USB stick, as otherwise automatic updates could disrupt operations.) Includes a milling bed designed as a vacuum table, consisting of twelve adjustable sub-elements. A cross table made of PE with an MDF cover plate. A vacuum pump from Becker with a capacity of 160 m³/h, designed as an oil-operated impeller. (Recommended use: machining coated chipboard.) Two 16 A, 400 V AC plugs are required for the vacuum pump's power connection. The customer must provide 3 mm HDF, raw on both sides, as a sacrificial plate for the entire vacuum table (5000 x 2100 mm). Includes a 10-piece cutting tool set: 2 x 5 mm TAC double-flute cutters. 8 x 4 mm solid carbide single-flute cutters. (Tool selection can be adjusted as needed.)

Condition: used, Year of construction: 2001, Used machine Year of construction: 2001 Condition: Function tested Equipment and technical data: Milling aggregate 4.4 kW HSK 63 F tool holder Speed 1,000 - 18,000 rpm water-cooled Tool changer: 4-fold lateral Drilling head: 9 vertical drilling spindles in 32 mm increments Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAm 32 Vacuum pump 40 cbm/h Bs Ia Uokwg R Ij Enljwl Incl. vacuum cups Travel distances: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Machine is delivered complete in all mechanical, electrical and electronic components and overhauled where necessary All guides checked; console guides replaced New PC control unit for the TWIN CAM control system All axis modules checked and serviced Location: Hochheim Availability: by arrangement

Condition: used, Year of construction: 2018, Wing unit for wood Her CNC machining centers used Year of manufacture 2018 HSK 63 F mount with torque support with 2 horizontal tool spindles suitable for holding a CLAMEX grooving cutter and a saw blade Technical data: max. drive speed 8000 rpm max. output speed 12,000 rpm Permissible operating temperature 85° Unit can be swiveled 360° around the drive axis Noise level 80 db(A) Weight 3.257 kg Bwe Iov E S Avsa U Enlsl Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface -For Clamex machining (P14) within the center of the surface -For drilling and milling Bwj Iswb Ehcea U Enlsl Technical specifications: Max. input speed: 8000 rpm Max. output speed: 12000 rpm Gear ratio i=1:1.48 Max. torque Mt= 15 Nm Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Basic machine - DYNESTIC 7532-10.5 Automatic Dynestic table For classic nesting processing with wear plate Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, aggregate head and consoles Traveling column in gantry design Bwe Ia Usvymfue Enlol Rack and pinion drive, helical gears, in X and Y directions, Ball screw spindles in Z direction for precise positioning Technical data: Processing dimensions: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances X = 4695 mm Y = 2100mm Z = 293 mm Max. drive-over height DYNESTIC table Z = 100 mm from top edge of table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table Fixed, continuous machining table with grid division, continuous grooves in X and Y direction, spacing of the grooves 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum field 1-circuit vacuum system Drilling unit 7877, 19 spindles Drive power 1.7 kW 13 vertical spindles can be called up individually Arrangement in U-shape 5+4 in X and 4 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from screw end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: clockwise / anti-clockwise in Change n(max.) 1000 - 4400 min-1 continuously adjustable Mounting: M 10 thread - 11 mm fit without tools, without mounting 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Mounting: M 10 thread, 11 mm fit Total drill length max. 63 mm from screw end without tools, without mounting Milling unit 7842, Power: 12.0 kW (S6) n(max.) = 1000 - 24000 min-1 continuously adjustable, max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand threaded nut (for right-hand rotating tools) with collet chuck with HSK shaft Ceramic ball bearing (hybrid bearing) Tool weight max. 6 kg (incl. holder) Tools: milling and grinding tools max. Ø 160 mm Safety paneling in accordance with CE standard Safety fence on the side and rear Vacuum pump 500 m³/h dry runner Personal safety through light barriers in the front area of the machine Handheld control unit for remote control of the machine with the following operating functions: > Start / stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed / rapid traverse for all axes > EMERGENCY STOP CAMPUS V7 CAD/CAM software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM properties for creating part variants with macro technology Automatic central lubrication Automatic lubrication according to defined lubrication intervals Additional sealing against dust through overpressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y and Z directions, for all ball screws in Y and Z directions for all milling spindles

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: Functionally tested Equipment and technical data: Processing length in X = 200 - 3200 mm Max. travel without re-clamping 1300 mm Bws Iaevzuw Ue U Enljl in Y = 70 - 920 mm Material thickness Z = 8 - 70 mm With height-adjustable infeed roller conveyor for 4-sided milling / complete formatting 1 processing field with length stop 1 roller conveyor for supporting the workpieces downwards 5 roller conveyors for supporting sheet material in a way that protects the material 1 movable support for small parts With drilling unit 7883 / 15 spindles 9 vertical spindles, L-shaped arrangement, 5 in X and 4 in Y direction 32 mm grid, max. drill diameter 35 mm Total drill length 70 mm from screw end (depending on panel thickness) Spindle extension stroke 70 mm 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Drive power 1.7 kW Integrated saw unit for sawing/grooving in X direction Milling unit 7830 10.3 kW HSK F 63 6-way tool changer 7887 Tool length measuring system LASER Automatic central lubrication - automatic lubrication according to defined lubrication intervals For all ball screw spindles in X, Y and Z direction With 21.5" flat screen With vacuum system ECO, 1-circuit vacuum system 8 m³/h - HOLZHER Cabinet Control Base - HOLZHER Campus V6 - Single Evolution Software Availability: short term Location: Hochheim

Condition: new, Year of construction: 2025, Exhibition machine Year of manufacture: 2025 Equipment and technical data: The Masterwood CNC machining center PROJECT TF is ideal for complex CNC machining in the smallest of spaces, both for solid wood, panel materials or other materials. Advantages: - Very small space requirement - Maximum time savings thanks to extremely fast production times - Fast amortization thanks to low purchase price - Quick learning of the technology thanks to extremely simple operation - Cleanliness of the workpieces with low suction power thanks to machining from below - Extremely fast, simple and variable programming with the MASTERWORK software (standard) - Extremely fast and simple programming of complete cabinets through the use of Palette CAD (option) Technical data: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250mm Travel speed: 0-25 m/min. Y-axis: Max. workpiece width: 1,000mm for all units Min. workpiece width: 85mm Travel speed: 0-50 m/min. Z-axis: Max. workpiece thickness: 60mm Min. workpiece thickness: 10mm Travel speed: 0-20 m/min. The minimum and maximum workpiece sizes depend on the weight and also on the ratio of length to width! Units: 16mm drilling head: Vertical spindles in X direction: 5 pieces Vertical spindles in Y direction: 5 pieces Horizontal double drilling spindle in X direction: 2+2 pieces Horizontal double drilling spindle in Y direction: 1+1 pieces Distance between drilling spindles: 32mm Speed of drilling spindles: 4,000 rpm. Motor: 1.7 kW Groove saw: in X direction Speed: 4,000 rpm Max. saw blade diameter: 125mm Motor: 1.7 kW (The groove saw is integrated in the drill head) Control: Personal computer Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with at least 300 GB storage space Color screen Integrated video card 2 Ethernet cards Program: MASTERWORK MACHINE VERSION Other data: Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Bws Iaev E Szxo U Enlol Extraction nozzle: 1 x 150mm Other features: - Air tables in the work area - Roller table in the inlet and outlet - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (Operating instructions, circuit and pneumatic diagram are included in digital form) "PARTNERSHIP EDITION" consisting of: Milling unit, including MASTERWORK software extension Speed: 1,000 to 18,000 rpm. Motor: 4.5 kW with ISO 30 mount Incl. integrated suction control (when drilling only the drill head is suctioned, when milling only the milling unit is suctioned) 6-way tool changer Tool equipment, consisting of: 3 pieces 5mm – GL 70mm - blind hole drill (right) 2 pieces 5mm – GL 70mm - blind hole drill (left) 1 piece 5mm – GL 70mm - through drill (left) 2 pieces 8mm – GL 57.5mm - blind hole drill (right) 2 pieces 8mm – GL 57.5mm - blind hole drill (left 1 piece 10mm – GL 57.5mm – blind hole drill (right 1 piece 10mm – GL 57.5mm – blind hole drill (left 1 piece 10mm – GL 70mm – blind hole drill (left) 1 piece 8mm – GL 70mm - blind hole drill (right) 1 piece

Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface -For Clamex machining (P14) within the center of the surface -For drilling and milling Technical specifications: Max. input speed: 8000 rpm Be Iswb Eg Sja U Enlswl Max. output speed: 12000 rpm Gear ratio i=1:1.48 Max. torque Mt= 15 Nm Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: Functionally tested Technical specifications: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0-25 m/min. Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0-50 m/min. Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0-20 m/min. The minimum and maximum workpiece sizes depend on the weight and the length-to-width ratio! Units: Milling unit with 4.5 kW motor (frequency-controlled) including MASTERWORK software extension Speed: 1,000 to 18,000 rpm including integrated extraction control (only the drill head is vacuumed during drilling, only the milling unit during milling) 4-station tool changer for ISO 30 taper 16 mm drill head: Vertical spindles in X direction: 5 Vertical spindles in Y direction: 5 Horizontal double drilling spindle in X direction: 2 + 2 Horizontal double drilling spindle in Y direction: 1 + 1 Drill spindle spacing: 32 mm Drill spindle speed: 4,000 rpm Motor: 1.7 kW Grooving saw: in X-direction Speed: 4,000 rpm Max. saw blade diameter: 125 mm Motor: 1.7 kW (The grooving saw is integrated into the drill head) Be Ia U Ejwb Eg Eenlswl Program: MASTERWORK MACHINE VERSION Additional data: Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Extraction nozzle: 1 x 150 mm Other features: - Air tables in the work area - Roller table in the infeed and outfeed - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Central lubrication - Import of DXF files Machine dimensions: 2100 x 2410 x 1510 mm Weight: approx. 1300 kg Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2000 m³/h Air velocity: 25 - 30 m/s Extraction nozzle: 1 x 150 mm Availability: Short term Location: Hochheim

Condition: new, Year of construction: 2022, Exhibition machine Year of construction: 2022 Equipment and technical data: Basic machine 7402 with pin-jet dowel insertion function Hand-held control unit 2D barcode scanner UPS Quattro HSK package incl. 4-fold tool changer XL drilling head Double drilling spindle in Y Automatic central lubrication Location: Hochheim Bj Isqv Iahsa U Enlswl Availability: approx. week 32/2022