Electromagnetic belt separator

Wagner Magnete 454-95/100-600

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Iedpeufi Rxjfx Ag Dja Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Year of construction: 2023, condition: new, Screening plant SEBA double drum 26 Standard version - according to the following technical description: DIMENSIONS length: 6175 / 6350 mm width: 2100 mm height: 3335 mm Weight: 3300 kg Maximum speed: 80 km / h WORKING DIMENSIONS length: 6175 / 6350 mm width: 6050 mm height: 3200 mm loading height: 2350 mm FACTIONS 2 or 3 fractions with optional slip-on ring. Mesh size fraction 1: 0mm - 10mm (adjustable) Mesh size fraction 2: 10mm - 70mm (adjustable) Mesh size fraction 3: 70+ mm (adjustable) POWER: 5-35 m3 / hour Power supply: 16A min / 10kVA full electric Power consumption: approx. 8,5 kWh Ijdpfx Aeiy Nrgog Dsa Optional Transport of the emergency power unit in the screening plant possible (Subject to technical changes)

Condition: reconditioned (used), Year of construction: 2020, operating hours: 3,300 h, functionality: fully functional, overall weight: 28,000 kg, total width: 2,500 mm, VZ 850 DK, Volvo Penta TAD16 L 770 HP, 3,300 operating hours - Conveyor belt as new, rollers replaced - Fine shredding shafts 12-9 as new - Counter-blade as new - Two hoppers - Long discharge conveyor Isdpfx Asw S Iiijg Dsa - Magnetic belt - Track undercarriage guard - Cleanfix reversible fan

Year of construction: 2021, condition: as good as new (ex-display), Overband plate magnet Version in VA 1.4301 tightly welded Iedpfx Ajd Evl Djg Dsa 800 x 500 x 180mm completely welded housing Ring eyelets for suspension

Condition: used, Year of construction: 2009, operating hours: 20,536 h, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, empty load weight: 16,000 kg, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Ijdpfx Asu Thypog Dsa Machine foot elevation 200 mm Remark: The machine is currently in our workshop undergoing partial refurbishment. We expect the refurbishment work on the machine to be completed by the end of October, after which the machine will be tested and released for sale.

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Single-shaft shredder with electrohydraulic drive Rotor width: 2500 mm Rotor diameter: approx. 500 mm Electric motor: 250 kW Ijdpjq I Rkdjfx Ag Doa

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 Iodpfx Agjd Dy S De Dea 2200 x 1000 x 400mm ===== 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1200x500mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, power: 11.03 kW (15.00 HP), overall weight: 1,500 kg, input voltage: 380 V, ejection height: 1,000 mm, opening width: 600 mm, rotor length: 1,000 mm, rotary shear 2 shafts - 2 motors 15kw and 12kw - inversion in case of jam - shredding chamber 1100 x 900 - thickness of new knives 30 - 4 tons - large loading hopper - possibility of loading very versatile and very powerful, can pre-grind organic matter for methanizers, copper cables, lumps, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, hollow bodies, etc. use to grind up sick calves at the renderer. Isdpoh Diwusfx Ag Dsa

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For optimum recovery of non-ferrous metals or purification of materials This extremely powerful machine is mainly used for processing household waste, shredder materials, household appliances, wood, plastic, glass, IBA and bed ash and electronic scrap. This IMRO non-ferrous metal separator stands up to the demands of very high recovery quotas and high purity levels. Iedpfx Agjvdqdis Dea

Condition: used, Year of construction: 2021, operating hours: 5,300 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, rotor length: 3,200 mm, power: 310 kW (421.48 HP), rotational speed (max.): 100 rpm, rotational speed (min.): 20 rpm, If you are interested, just ask! Ijdpevt Suhofx Ag Dea