Cutting mills

Terier G 400/600

Year of construction: 2002, condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Kodpfx Adsitcvujtjwt Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used very good Price: on request

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Kwodpfx Adog Ey Ufotjt Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor Kwsdpfx Ask Tuxdjdtjt 2 rows stator knives Inlet cross section approx. 600 x 660 mm Drive motor: 30 kW

Year of construction: 2022, condition: new, machine/vehicle number: 2022022209, Aluminum angled conveyor belt with substructure Conveyor length: 1500mm flat + 4000mm rising Pitch angle in bend 45°C Discharge height: approx. 3000mm Height of the horizontal top edge 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 400mm T30 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+180-5+35+70 Full-surface underlay sheet Kwsdpfeh Elhzox Adtjt Drive: Motor approx. 0.25KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Incl. construction for hanging the overbelt magnetic separator in the horizontal.

Year of construction: 2024, condition: new, The Agricracker AC100 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Even as fet and wet products, which are better grindable then known milling machines. Kwodeg Ugbgopfx Adtot Capacity 0-3 ton / hour. Flyer at the bottom of this page. Milling trials are possible.

Condition: used, LSI51903, TR400K/DN40, Lauda secondary circuit system Model: LSI51903 Kedpfxjd Rlkro Adtjwt Type: TR400K Condition: Used

Condition: like new (used), Year of construction: 2021, Hardly used Donaldson Dalamatec Torit DCE Filterunit Typ: DLMV20/10k5 Fan: 2,2kW Filtersurface: 20m2 Kodpfx Adomi Rn Njtjwt Weight: 380kg Atex version Incl. filter frames 3 pieces available Also 2 pieces DLMV6/10K3 available (2010)

Condition: excellent (used), Here we offer you Thermotron temperature chamber. Water cooled Thermotron temperature chamber SE-1000-6-6 Inner dimensions: WxDxH 1000 x 1000 x 980 mm Working volume: approx. 980 liters Temperature range: -70ºC to 180ºC Kwedpfx Aoixtitjdtot Heating up total : ca 4,1 K Cooling down total : ca 1,2 K Heating power in ºC/minute -65º to 71ºC: 6.8ºC Heating power in ºC/minute -65º to 180ºC: 5.6ºC Heating capacity in ºC/minute -40º to 85ºC: 6.5ºC Cooling capacity in ºC/minute 85º to -40ºC: 4.7ºC Cooling capacity in ºC/minute 71º to -65ºC: 3.7ºC Cooling capacity in ºC/minute 180º to -65ºC: 4.3ºC External dimensions - WxDxH: 1250 x 1900 x 2200 mm Electrical requirements 400V/5P/N/PE 35 A Refrigerants: R508B and R404 A Approx. weight: 900 kg Type: Thermotron SE- 1000-6-6 For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, machine/vehicle number: 13206, Rotor diameter: 300 mm Rotor width: 400 mm Rotor blades: 3 Kwjdpfowikaaox Adtjt Stator blades: 2 Inlet cross-section approx. 300 x 400 mm Drive motor: 15 kW

Condition: used, Machine: Screw conveyor, hollow screw Length: 6.30 m Ø auger: inner auger 170 mm, outer auger 460 mm Kjdpfsrn T R Iox Adtewt