Used Wood Drying Kiln for sale (8,533)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: Podpfx Acswp Rqfovegi • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: as good as new (ex-display), Year of construction: 2018, For sale is a wood chips and sawdust drying technology with a capacity of 400 kg / hour, together with a raw material feeding system. The machine is brand new and has not been commissioned. Pgodpfx Acotpxy Tsvji

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Podpjyub Ahofx Acvegi

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: MB200MEH3SP-E, functionality: fully functional, cutting length (max.): 3,962 mm, cutting height (max.): 203 mm, cutting width (max.): 1,420 mm, Lightly used Woodmizer Slabmizer MB200. This machine is ideal for surfacing large planks and live edge slabs. The Slabmizer MB200 is renowned for its precision and reliability. Includes extraction unit. Specifications: Brand: Woodmizer Model: Slabmizer MB200 Year of manufacture: October 2021 Power supply: 380 volt / 16 amp Motor: 2.9 kW Extraction unit: Power supply: 380 volt / 16 amp Pgedpfx Aceyh Ng Sjvsi Capacity: 2,950 liters per minute Asking price for Slabmizer including extraction: €11,950 excl. VAT Additional information: Maximum material width: 1,420 mm Maximum material height: 203 mm Maximum material length: 3,962 mm (or longer with optional 1.5 m extensions) Minimum material length: 558 mm (22") Maximum cutting depth: 3.2 mm (1/8") Minimum cutting depth: 0.4 mm (1/64") Cutterhead: 127 mm (5") with five four-sided carbide knives Cutterhead speed: 5,500 RPM Powered cutterhead: Directional control and variable feed rate Sanding head: Optional 7" orbital sanding head Dust extraction port: 90 mm (3.5") diameter Country of manufacture: Poland

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase Pgedoya Hvqspfx Acvoi

Year of construction: 2019, condition: ready for operation (used), overall weight: 12,000 kg, total height: 4,500 mm, This LINYI JIANZHONG WOOD MACHINERY JJC-CP was manufactured in 2019. It features a maximum pressure of 500 tons, adjustable for various applications, and can handle filling sizes up to 1300 x 2500 mm. With a capacity of 6 batches per hour and a total weight of 12000 kg, this carcase press is CE marked, ensuring compliance with safety standards. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max pressure: 500 t (adjustable) • Filling height: 900 - 1300 mm • Max filling size: 1300 x 2500 mm Psdpfjyaqgmex Acvegi • Press position: approx. 500 mm below floor level • Feeding table: 2000 x 1960 mm • Pick-up table: 2350 x 2500 mm • Capacity: 6 batches per hour • Ce marking Extra Information Machine still under power Dimensions Machine Depth 3600 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Pgedpoyr I Dmofx Acvei

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Pjdpfx Aeun N Auocvsgi Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW Psdpfx Acjtutwvovjgi -CE mark

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: WM1000MEH40S, functionality: fully functional, operating hours: 197 h, power: 30 kW (40.79 HP), type of input current: AC, cutting width (max.): 1,700 mm, actuation type: electric, total length: 10,000 mm, year of last overhaul: 2025, A powerful and extremely robust industrial sawmill with an impressive cutting capacity of up to 170 cm trunk diameter is available for sale. The machine is fully operational and in very good condition with only 197 operating hours. Ideal for professional users, large-scale woodworking and businesses with high demands on precision and performance. Technical data & equipment: - 30 kW electric motor – powerful and efficient - Log diameter up to 170 cm Ø - Electric height adjustment - Electric feed - Integrated cutting thickness calculator for precise results - Cutting length 6.5 m, optionally extendable - Includes 10 m rail system - Year of manufacture: 2019 - Only 197 operating hours - Fully operational - 2-year warranty This is an opportunity to purchase a powerful machine with very low mileage at well below the original price. Item number: 25-G07 / WM1000MEH40S Pgodpfxsypkc Ho Acvji Note: The photos shown are examples and may differ from the sawmill actually offered. If you are interested or have any questions, please do not hesitate to contact us. We will be happy to send you further information at any time upon request.

Condition: reconditioned (used), Year of construction: 2022, operating hours: 1,025 h, functionality: fully functional, machine/vehicle number: LT70LG57SDH15-3.0AC, cutting length (max.): 8,400 mm, overall weight: 3,000 kg, height adjustment type: electric, tooth pitch: 22 mm, saw band length: 4,670 mm, saw band width: 38 mm, input current: 16 A, Equipment: chassis, LT70 mobile sawmill – built in 2022 – top-of-the-range equipment – 57 hp – 1-year warranty A very well-equipped mobile sawmill (built in 2022) with approx. 1,025 operating hours is for sale. The machine is in good condition and ready for immediate use. Thanks to its extensive range of features, it is ideal for professional users, contract sawmills or larger wood processors. Pgsdpfx Aeypiz Uecvoi Technical data & features: - 57 hp petrol engine - up to 95 cm Ø - AccuSET II cutting thickness calculator - Cutting length 8.4 m (optionally extendable) - Electric feed & height adjustment - Pre-cutter - LubeMizer belt lubrication system - Radio remote control - Hydraulic package 15 log turner, centre clamp, 4 pull-down clamps, 3 compensation rollers, 1 of which is driven, loading arm) - 3.0 t double axle - Year of manufacture: 2022 - Approx. 1,025 operating hours - 1 year warranty Item number: 25-G04 / LT70LG57SDH15-3.0AC

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW Pjdpoyrdg Djfx Acvjgi - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: new, Year of construction: 2024, Wood crusher with cyclone filter, eletrical box, etc... Pgedpoxf Nwyefx Acvoi The machines has a CE certificate. Bjw7wnlw3f0 Quantity of cutting tip: 6 pieces Electric motor power: 30Kw Capacity: 800-1200Kg/hour Drive Type: V-Belt Feeder size: 150mmx150mm Located locally in (EU) Hungary

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: Wood-Mizer WB2000 Bandsaw (Year of manufacture: 2020) Offered for sale is a Wood-Mizer WB2000 from 2020, which has only been in operation since 2021. The machine has been regularly maintained, used very little, and is in excellent technical condition. Technical specifications: powerful 30 kW electric motor Log diameter up to approx. 1 m Cutting width up to about 90 cm Load capacity approx. 6 tons Suitable for 90–100 mm wide band saw blades Equipment (included): complete loading/infeed conveyor outfeed table with three-way material distribution (left / right / straight ahead) Pjdpfx Ajyha Ipocvsgi Camera system for cut monitoring PRO operator panel with touchscreen retrofitted quick-clamping system The machine can be inspected and tested on site; everything works perfectly.

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Podjyr Dfaepfx Acvjgi Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: used, Year of construction: 2022, Wood-Mizer MP260 Compact and versatile four-sided planer/moulder Machine from the Wood-Mizer machine exchange program, inspected and factory set. Excellent technical condition, long tables, new side pressure rollers, polyurethane feed roller, sharp knives. Machining parameters: Four-sided: Planing width: 40–260 mm Planing height: 10–100 mm Two-sided: Planing width: 10–300 mm Planing height: 10–220 mm Single-sided: Planing width: 10–410 mm Planing height: 10–220 mm Feed speed adjustable: 2–11 m/min Pgjdpfx Asyr Dcrjcvsi Technical specifications: Top shaft – straight knives 410 mm, 2 pcs, 6000 rpm Bottom shaft – straight knives 300 mm, 2 pcs, 6000 rpm Side shafts – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max. side head height – 100 mm Motors: Top shaft – 3 kW Bottom shaft – 3 kW Side shafts – 3 kW Feed – 0.37 kW 3-phase, 400 V, 50 Hz, 27.45 A Extraction ports – 3 x 100 mm, 1 x 125 mm Weight: 440 kg

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP200 Planer-Moulder Simultaneously planes and profiles from both sides Machine used for training and demonstrations, inspected and factory-set. Working parameters: double-sided planing width 10-300 mm planing height 15-100 mm min material length 470 mm single-sided planing width 10-400 mm planing height 15-210 mm Feed speed 2-11 m/min Technical specifications: upper shaft – straight knives 410 mm, 2 pcs, 6000 rpm side shaft – spindle 30 mm, straight knives 50 mm, 2 pcs, 6000 rpm Motors: upper shaft – 2.7 kW Pedpoyr Dclefx Acvsgi side shaft – 2.7 kW feed – 0.37 kW 3-phase, 400 V, 50 Hz, 16A Extraction ports – 1x100 mm, 1x125 mm Weight 370 kg

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MP180 Universal planer – jointer, double-sided planer, spindle moulder. Machine used for training and demonstration purposes, fully tested and factory set. Processing parameters: Double-sided: planing width: 10-300mm planing height: 10-100mm Single-sided: planing width: 10-400mm planing height: 250mm Feed speed steplessly adjustable 2-11 m/min Pedpsyr Dcfofx Acvjgi Technical specifications: Upper shaft – straight knives 410mm, 2 pcs, 6000 rpm Side shaft – spindle 30mm, straight knives 50mm, 2 pcs, 6000 rpm Motors: Upper shaft – 4kW Side shaft – 3kW Feed – 0.37kW 3 phase, 400 V, 50 Hz, 16 A Extraction ports – 2x 100mm Weight 362kg

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Pedoyr Dawjpfx Acvogi Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. • FANUC controller • Working area: X - 3080 mm Y - 1540 mm Z - 200 mm • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, operating hours: 2,520 h, type of input current: three-phase, cutting length (max.): 4,800 mm, saw blade length: 4,010 mm, Wood-Mizer LT20B bandsaw, equipped with the corresponding BMS 250 automatic blade sharpener and BMT 100 manual blade setter. Electric motor: - 11 kW Log cutting length: - up to 4.8 meters Control: Pjdsx Hql Depfx Acvogi - stationary control panel - electric height adjustment - electric dimension adjustment Additional equipment: - Cutting thickness counter - Blade lubrication system: Lube-Mizer - electric height adjustment - electric feed Machine dimensions: - Length: approx. 750 cm - Width: approx. 220 cm - Height: approx. 240 cm

Condition: new, Year of construction: 2023, cutting length (max.): 5,100 mm, cutting width (max.): 860 mm, saw blade width: 380 mm, saw blade length: 5,000 mm, WM4000S industrial band saw with operator's cabin Drive: Electric motor: 22 kW Cutting parameters: Maximum cutting length: 5.1 m with board removal system Maximum cutting width: 86 cm Bed and head: Debarker Head movement (front/back): electric Advanced touchscreen display Saw guide arm: electric Double saw guide roller Automatic saw lubrication Pneumatic saw tensioning Servo motor (up/down) Board removal conveyor 1.7 m Pantograph Reinforced bed Hydraulics: 2 vertical side supports Pgsdoypk Rdepfx Acvji 2 chain turners 1 main clamp 1 drive roller 1 side roller 2 clamps Hydraulic pump 7.5 kW Saw blade: Length: 5000 mm Width: 38 mm Wheel diameter: 635 mm Year of manufacture: 2023 Price: PLN 530,000.00 PLN 399,000.00

Condition: used, Year of construction: 2019, operating hours: 26,917 h, functionality: fully functional, cutting length (max.): 6,100 mm, saw blade width: 380 mm, saw blade length: 4,670 mm, Machine specification: LT70ME20SAH3-SWR CUTTING DIMENSIONS: - max log diameter: 95 cm - clearance between rollers: 73 cm - max cutting height: 39 cm HEAD EQUIPMENT: - SW-10 SETWORKS automatic cutting thickness setting device - head feed up/down – electric - head feed forward/backward – electric - blade guide arm – electric SAWBLADE – length 4670 mm, width 38 mm Blade guide wheels: 600 mm Type: with belt Material: cast iron STANDARD HYDRAULICS: - 3 side supports - central clamp on two rods - comb-style log turner - 2 x leveling rollers - 2x dual-function clamps - loading arms Used machine, fully technically refurbished. Podpfxjypk E Uo Acvegi All components checked and replaced as necessary. Very good technical condition, fully ready for operation. Additional advantage: extended warranty – 6 months. YEAR OF MANUFACTURE: 2019.09.04 ENGINE HOURS: 26,917 Price: 110,000 PLN net

Condition: excellent (used), Year of construction: 2022, Horizontal 6-Head Resaw Year of manufacture: 2022 Technical data: Motor: Electric 11 kW Cutting dimensions: Max. cutting width (cant timber): 30 cm Max. cutting height: 20 cm (18 cm with electric feed) Podpfsylw Saex Acvegi Min. cutting height: 0.6 cm Min. material length: 120 cm Feed system: Steel belt conveyor Feed speed: 0 – 20 m/s Saw band: Length: 4010 mm Width: 32 mm / 35 mm Band wheels: Diameter: 600 mm Multisetwork – Allows cutting height of each individual unit to be set via the control panel. Technical condition: very good. Technical documentation and further photos are available.

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Podpeycvxmsfx Acvegi Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2015, operating hours: 8,286 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: Drymex S 5, Beautiful, robust drying system consisting of 2 units, 1 large stainless steel drying chamber with perforated floor, including piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food products (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), permitted for indoor use only. The individual segments of the perforated floor can be lifted up separately for cleaning. Excellent condition, very solid construction. Dimensions: Units – 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301. Unit 1: Year of manufacture 2012, Unit 2: Year of manufacture 2014, Drying chamber: Year of manufacture 2015. Price negotiable. Podpsyffqqsfx Acvogi